Raul,
The occasional failure to record because line in is selected is a
problem. But the solution of always having the internal microphone
on would also be a problem. Imagine using an external microphone in
the line in position and having the extra noise from handling the
Book Sense, operating the controls and general environmental noise
when what you really want is input only from the line in
microphone. I suggest that you retain the microphone, line in
options and simply add another option, "both" for those who must have
this feature.
There is another solution to the problem of getting no recording when
line in is selected but there , is no device connected to it. One
could make the speaker emit a warning beep or have the unit say "no
line in source" if recording is started and no audio detected after a
certain period of time.
At 05:56 AM 2/23/2010, Raul A. Gallegos wrote:
No. Currently if you want to use the internal microphone, it must be
set to microphone. We will try to make it so that you can use the
internal microphone no matter the setting, but this is not the
current behavior as of today.
Many thanks.
On 2/23/2010 5:57 AM, Jenifer Gilley wrote:
So, if I want to record something using line-in and i set the book sense
to line-in, I can still use the internal microphone after my line-in
recording is done?
Jenifer Gilley
email
[email protected]
MSN:
[email protected]
----- Original Message ----- From: "Raul A. Gallegos" <[email protected]>
To: <[email protected]>
Sent: Monday, February 22, 2010 10:51 AM
Subject: Re: [GW-Booksense] booksense record question
Currently if you want to record via microphone, whether it's internal
or external, the setting must be set to microphone. if you set it to
line in, only a line in type of recording will work. I have marked
this down to see if it can be made so the internal microphone works
regardless.
Many thanks.
On 2/20/2010 6:50 PM, Jamie Kelly wrote:
I was under the impression the mike line in input option only change the
jack input but I found out yesterday if you select line in the built
in mike
doesn't work and you get a blank recording. I hope this is something
that
can be corrected with a future update.
Jamie
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list andyour
message is related to GW Micro or the BookSense, then please consider
sending your message to [email protected] so the entire list
will receive it.
To manage your subscription to gw-booksense, visit:
http://www.gwmicro.com/listserv
--
Raul A. Gallegos
GW Micro Technical Support And Product Specialist
Voice 260-489-3671, Fax 260-489-2608
Web http://www.gwmicro.com
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list andyour
message is related to GW Micro or the BookSense, then please consider
sending your message to [email protected] so the entire list
will receive it.
To manage your subscription to gw-booksense, visit:
http://www.gwmicro.com/listserv
If you reply to this message it will be delivered to the original sender
only. If your reply would benefit others on the list andyour message is
related to GW Micro or the BookSense, then please consider sending your
message to [email protected] so the entire list will receive it.
To manage your subscription to gw-booksense, visit:
http://www.gwmicro.com/listserv
--
Raul A. Gallegos
GW Micro Technical Support And Product Specialist
Voice 260-489-3671, Fax 260-489-2608
Web http://www.gwmicro.com
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list andyour
message is related to GW Micro or the BookSense, then please
consider sending your message to [email protected] so the
entire list will receive it.
To manage your subscription to gw-booksense, visit:
http://www.gwmicro.com/listserv
If you reply to this message it will be delivered to the original sender only.
If your reply would benefit others on the list andyour message is related to GW
Micro or the BookSense, then please consider sending your message to
[email protected] so the entire list will receive it.
To manage your subscription to gw-booksense, visit:
http://www.gwmicro.com/listserv
