You can't enumerate SAPI engines when using ECI or visa versa. You
don't have to switch to the engines just enumerate them so I would expect this.
At 04:23 PM 6/25/2008, you wrote:
Hi Doug,
I still don't have any engines under ECI eloquence 6.1. I used the
6.1 cd to remove Eloquence V5. Af ter restarting the system, I was
using the TrippleTalk and was able to get the ECI version up and
running. I changed back to the TrippleTalk and reinstalled
Eloquence V5. I check to see if the V6 version of Eloquence still
had all it's engines. They were all there. I then selected The SAPI
synthesizer and the V5 engines were present. I did not select or
start the v5 engine but instead I pressed esc and hit inter which
took me back to the TrippleTalk. I then went back to the
synthesizer dialogue and none of the ECI v6 engines were there.
Robert
----- Original Message ----- From: "Doug Geoffray" <[EMAIL PROTECTED]>
To: "list info" <[email protected]>
Sent: Wednesday, June 25, 2008 1:12 PM
Subject: Re: Window-Eyes 7.0 Beta 1 Is Now Available!
David,
As mentioned, the new 6.1 Eloquence only has issues with version 5
Eloquence. So if you go to your add/remove you can safely remove
anything that reference Eloquence 5. If you don't see a 5 in the
name then you don't need to touch it. Since JAWS doesn't use 5
this won't effect them.
Regards,
Doug
David Tanner wrote:
Hi,
I hope you don't get a load of this same question, but since I
need both WE and Jaws on my systems at work I am wondering if
there is an easy way to identify which Eloquence to uninstall or
if I need to leave them all there?
----- Original Message ----- From: "Aaron Smith" <[EMAIL PROTECTED]>
To: "Darren Harris" <[EMAIL PROTECTED]>
Cc: <[email protected]>
Sent: Tuesday, June 24, 2008 1:01 PM
Subject: Re: Window-Eyes 7.0 Beta 1 Is Now Available!
Please be sure to read through the readme, as the interaction
between the version of Eloquence is detailed. Installing the beta
will not change your synthesizer. If you have the SAPI version of
Eloquence installed, and you want to try the new Eloquence, you
should switch to the DEC32 for Window-Eyes first, and then switch
to Eloquence. If you're not using Eloquence with any other
software, then we recommend removing it to avoid any unwanted complications.
Aaron
Darren Harris wrote:
Right thanks.
So right now I am using the elequence with the sappy at present. So can
I download, install the new upgrade and would it change the synthosizer
by default? If so then by looking at the knowledge base I would need to
change back to dectalk32 first. Or is it safe or I should say will it be
safe to install it first.
-----Original Message-----
From: Aaron Smith [mailto:[EMAIL PROTECTED] Sent: 24 June 2008 18:50
To: Darren Harris
Cc: [email protected]
Subject: Re: Window-Eyes 7.0 Beta 1 Is Now Available!
Darren Harris wrote:
will the downloadable upgrade include the new spech synthosizer as well?
Yes. The new ECI Eloquence synthesizer is built into Window-Eyes
just like the DECtalk Access 32 (Window-Eyes) synthesizer.
Aaron
--
To insure that you receive proper support, please include all past
correspondence (where applicable), and any relevant information
pertinent to your situation when submitting a problem report to the GW
Micro Technical Support Team.
Aaron Smith
GW Micro
Phone: 260/489-3671
Fax: 260/489-2608
WWW: http://www.gwmicro.com
FTP: ftp://ftp.gwmicro.com
Technical Support & Web Development
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at
http://www.gwmicro.com/gwinfo, and can be searched through and
sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[EMAIL PROTECTED] and include leave gw-info in the body of the message.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at
http://www.gwmicro.com/gwinfo, and can be searched through and
sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[EMAIL PROTECTED] and include leave gw-info in the body of the message.
--
Doug Geoffray
GW Micro, Inc.
Voice 260-489-3671
Fax 260-489-2608
http://www.gwmicro.com
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo,
and can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[EMAIL PROTECTED] and include leave gw-info in the body of the message.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo,
and can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[EMAIL PROTECTED] and include leave gw-info in the body of the message.
--
Michael D. Lawler
Voice 260-489-3671
Fax 260-489-2608
Internet mailto:[EMAIL PROTECTED]
web http://www.gwmicro.com
ftp ftp://ftp.gwmicro.com
GW Micro, Inc.,
Development Liaison and Technical Support Supervisor
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can be
searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[EMAIL PROTECTED] and include leave gw-info in the body
of the message.
