John, it's not so much that we have or don't have XP, it's a matter of the software vendor and the codes are no longer available for generation. And again, this is not a new decision which was made. We've not supported this version of DEC for a long while now. It's not going to change.
Many thanks. On 5/18/2010 3:12 PM, John Gunn wrote: > Hi: > > Just a quick thought, if GW is using Windows 7 Professional, there is > virtual XP and I'm wondering if the software needed to generate those > codes would work under a virtual XP? > > > > -----Original Message----- > From: Curtis Delzer [mailto:[email protected]] > Sent: Tuesday, May 18, 2010 1:56 PM > To: DJ; [email protected] > Subject: RE: Dec_Access32 support? NOT! > > My contention is that, for those of us who don't have access to a floppy > drive, GW-Micro use to provide access to the software with a slash > regcode option provided with setup in installation, which, along with a > code they provide us, the ability to install the software. Aaron told me > yesterday that they no longer have the software which gives them access > to generating those codes. That is upsetting to me since I just had a > mother board change along with processor so my Dec_Access32, though > installed, would not work, which is the case with other software I had > including Sound Forge 9 and 10, both requiring that I re-register them, > including jfw 10 and 11 which I also have. I had no problem with any of > that, but Dec_access32 did not work, and when I called GW-Micro to > obtain a registration without a floppy drive, I was told that they no > longer support the software, that the software they use to use to > generate those codes doesn't work with Windows 7. So, I am abandoned > with regard to this CD and floppy disc supported software though the > software they use to generate the registration code, it seems to me, can > be made to work in Windows 7 in some kind of compatibility mode, or that > they would have a machine around with XP installed for those of us who > still might need a registration code. > Oh well, the issue isn't a floppy drive, the issue is that GW-Micro > decided to no longer support their own issued and paid for Dec_Access32, > though they joyfully provide Dec_Access32 directly in Window-Eyes, along > with Eloquence, so they must have some sort of license for it. It is > convoluted and unfortunate for me, particularly, so am frustrated > because I cannot benefit from software I enjoy, and have enjoyed a > DecTalk synthesizer as my primary since > 1991 or so. Ok, it's older technology and all that, but the algorithms > are still the best since they've held up since the mid eighties when > they were initially developed, and it does not follow that in all > situations that newer, is always better. I am not clamoring for some > kind of just "good or bad" taste here or that my synthesizer is better > than your Eloquence etc. etc. etc. that is not my contention, mine is > that how difficult would it be for GW-Micro just to continue providing > support for generating registrations for those of us without a floppy > drive, if all it is is a software program which generates it. I contend > that probably most on this list are still using XP in some flavor or > another, and if the people still using XP have a mother board go and > need a replenished piece of software that was paid for, that GW-Micro > should be willing, with a phone call and proof that said person is a > bona fide registered owner of a license to use it, provide a code to use > to keep them going. How would you feel if something you've lived with > as your primary input from your computer, was no longer available. When > I upgrade to Windows 7, I then will be prepared to forego Dec_Access32, > for I believe it no longer is supported by GW-Micro with that OS, but I > am not ready to go through all the machinations of OS upgrading at this > time, other aspects of my computer life demand my time and abilities as > such, and, I find that Dec_Access32 demands less resources than > Eloquence or any of the "human" sounding synthesizers, and I am use to > it, as I said, since 1991 or so. > Oh well, this discussion goes no where, but thanks, nonetheless for > reading. > > > Curtis Delzer. > HS. > If you reply to this message it will be delivered to the original sender > only. If your reply would benefit others on the list and your message is > related to GW Micro, then please consider sending your message to > [email protected] so the entire list will receive it. > > GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can > manage your list subscription at http://www.gwmicro.com/listserv. > If you reply to this message it will be delivered to the original sender > only. If your reply would benefit others on the list and your message is > related to GW Micro, then please consider sending your message to > [email protected] so the entire list will receive it. > > GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can > manage your list subscription at http://www.gwmicro.com/listserv. -- Raul A. Gallegos GW Micro Technical Support And Product Specialist Voice 260-489-3671, Fax 260-489-2608 Web http://www.gwmicro.com If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv.
