since my soundblaster is the one that is the primary sound card wold my on board be the one that is currently being used in safe mode? ----- Original Message ----- From: "Aaron Smith" <[email protected]> Cc: "GWMicro List" <[email protected]> Sent: Wednesday, November 07, 2012 7:18 AM Subject: Re: window eyes in safe mode
I would certainly give it a try, yes. Aaron On 11/6/2012 5:05 PM, Sunshine wrote: > So what you are saying is that i would need to use my motherboards on > board > sound card/chip vs the soundblaster card i have installed? > ----- Original Message ----- > From: "Aaron Smith" <[email protected]> > Cc: <[email protected]> > Sent: Tuesday, November 06, 2012 4:00 PM > Subject: Re: window eyes in safe mode > > > It's important to note that some audio devices simply don't support safe > mode. Not only to the USB audio devices need the audio drivers loaded, > but they also need USB drivers loaded, and that typically doesn't happen > (hence the whole point of "safe" mode). Built-in audio devices, and > dedicated internal audio devices attached directly to the system bus > typically work fine. > > Aaron > > On 11/6/2012 4:38 PM, Sunshine wrote: >> correct that is what i did and it did not come up >> >> ----- Original Message ----- >> From: "net bat" <[email protected]> >> To: <[email protected]> >> Sent: Tuesday, November 06, 2012 3:04 PM >> Subject: Re: window eyes in safe mode >> >> >> i have to manually load w e after windows boots in safe mode. it does not >> load automatically. >> >> -----Original Message----- >> From: Sunshine >> Sent: Tuesday, November 06, 2012 12:57 PM >> To: GWMicro List >> Subject: window eyes in safe mode >> >> >> I have a question for gwmicro, and those of you who have tried the safe >> mode >> ... >> I have a soundblaster x-fi extream audio sound card. >> I just tried safe mode with window eyes, no go with it, I have the audio >> in >> safe mode checked in window eyes. >> When i try and bring window eyes up; it will stay up but no sound will >> issue >> from my speakers. >> then window eyes will go away, also the control back slash does not work. >> Do i need to use a usb sound card? or will the internal soundblaster i >> have >> work? >> am not using usb speakers.if this combo does not work can anyone recomand >> any usb sound cards that does work with window eyes in safe mode?thanks. >> If you reply to this message it will be delivered to the original sender >> only. If your reply would benefit others on the list and your message is >> related to GW Micro, then please consider sending your message to >> [email protected] so the entire list will receive it. >> >> GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can >> manage your list subscription at http://www.gwmicro.com/listserv. >> >> >> If you reply to this message it will be delivered to the original sender >> only. If your reply would benefit others on the list and your message is >> related to GW Micro, then please consider sending your message to >> [email protected] so the entire list will receive it. >> >> GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can >> manage your list subscription at http://www.gwmicro.com/listserv. -- Aaron Smith Web Development * App Development * Product Support Specialist GW Micro, Inc. * 725 Airport North Office Park, Fort Wayne, IN 46825 260-489-3671 * gwmicro.com To insure that you receive proper support, please include all past correspondence (where applicable), and any relevant information pertinent to your situation when submitting a problem report to the GW Micro Technical Support Team. If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv. If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv.
