Thank you Chuck! I'll check this out. What do you mean by a radio stack? For now my plan is to use pre-certified modules so that my board will be certified as an unintentional radiator, which is thousands of $. But I still need to prove that the board doesn't emit Electro Magnetic Field above allowed.
On Fri, 4 Aug 2017 at 23:35, Chuck McManis <chuck.mcma...@gmail.com> wrote: > I am not sure exactly what you are asking. > > If you want to get FCC certification for your device, there is a process > it is documented at the FCC web site here: > > https://www.fcc.gov/engineering-technology/laboratory-division/general/equipment-authorization > > That pretty much outlines the steps. If you are using a manufacturer > supplied radio stack you may be able to leverage their certification but if > you wrote your own stack you will need to do the authorization > independently. There are a number of consultancies in the US who will > handle the process for you (for a fee of course). A long time ago (2006) I > was on a project that needed such certification and the vendor hired > charged $50,000 and it took four months to complete. They did all the > required paperwork and followed up on all of the questions the FCC had, > they also flew out an engineer to an FCC certified test facility to get the > verification tests done. (I live in the San Francisco bay area and the FCC > testing facilities around here are typically reserved months, if not years, > in advance it seems). > > --Chuck > > On Fri, Aug 4, 2017 at 1:00 PM, Sergey Ivanov <ivanov1...@gmail.com> > wrote: > >> Is there someone who did this or similar task before? >> Any specific suggestions? >> >> >> >> On 4 August 2017 at 21:57, Andrew Rich <vk4...@internode.on.net> wrote: >> >>> >>> You can do what ever you like as long as you understand the rules for a >>> licence and GNU Radio >>> >>> Andrew >>> >>> >>> >>> >>> On 5 Aug 2017, at 4:26 am, Sergey Ivanov <ivanov1...@gmail.com> wrote: >>> >>> Hi All! >>> >>> I have a product which uses nRF24L01+ 2.4 GHz modules for >>> communication. Now we have plans to go to North America market, and I >>> am not sure if my Chinese nRF modules can pass FCC test. If they can't, >>> then I need to re-design my PCB (now I use 2 layers logic board and nRF on >>> a socket). >>> >>> Can I use HackRF to imitate FCC test on my workbench? >>> >>> >>> _______________________________________________ >>> HackRF-dev mailing list >>> HackRF-dev@greatscottgadgets.com >>> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev >>> >>> >>> >> >> >> -- >> Best Regards, >> >> Sergey Ivanov >> +7 910 424 9895 <+7%20910%20424-98-95> >> >> _______________________________________________ >> HackRF-dev mailing list >> HackRF-dev@greatscottgadgets.com >> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev >> >> > -- Best Regards, Sergey Ivanov +7 910 424 9895
_______________________________________________ HackRF-dev mailing list HackRF-dev@greatscottgadgets.com https://pairlist9.pair.net/mailman/listinfo/hackrf-dev