The percent routines are the _* routines when you are working on a GTM system
and as I recall, that is how they exported out of Cache as well. Hunt for
them using a wild card in front of them in Studio to see what you find like
*ZOSV* or something like that. I also think that you cannot see the %
routines unless you have a licensed version of Cache as I recall. This is
all just a bit fuzzy in my memory, so forgive the mistakes, please. It has
been quite a while since I did anything with exporting routines and all of
that.
On Monday 25 April 2005 03:59 pm, Cameron Schlehuber wrote:
> Kill off the %ZOSF global first before running ZTMGRSET for the first time.
> Also be sure you map the % routines for VistA to be where you want them to
> be (probably NOT in %SYS or %CACHELIB). Since ZTMGRSET finds ^%ZOSF("UCI")
> to be defined, it's using that ... and not finding %ZOSV ... which ZTMGRSET
> establishes along with the %ZOSF global.
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Butch
> Jones
> Sent: Monday, April 25, 2005 5:58 AM
> To: hardhats-members@lists.sourceforge.net
> Subject: RE: [Hardhats-members] Re: Trying new install of Cache and Vista
>
> Roy,
>
> I was doing some checking on the routines listed in my system. I can
> readily find all the routines that do not begin with a "%" sign (my system
> list some 22,000 different routines. Where would the %routines be listed
> because they are not in the same namespace as the other routines? If I
> should look for the % routines, can you be a little explicit on where and
> how to look?? Helps us newbies...:)
>
> The other thing I noticed when I was reading the instructions - I was
> looking at picture that goes with item #34. In that screen shot, I can
> see at the bottom something that says :
>
> Routine: ZOSVONT Loaded, saved as %ZOSV.
>
> When I click on Explorer and then load all the routines in the NAMESPACE -
> VISTA, I can click on routine ZOSVONT. When I do, I see that the first
> line of the routine says the following:
>
> %ZOSV ;SFISC/AC - $View commands for Open M for NT. ;09/22/2004 11:56
>
> I am a little confused? I have yet to do any renaming or commenting out
> like nancy has suggested, I just want to see if the Cache or VISTA builds
> are bad before preceeding too far.
>
> Any advice..
> =======================================================================
>
> Roy Gaber <[EMAIL PROTECTED]> wrote:
>
> Did you map the % routines? The error you are receiving is indicating
> that the routine %ZOSV is missing.
>
> ========================================================================
> Sunday, April 24, 2005 8:34 PM Nancy wrote:
>
> All the new instructions were to be is what is there on Hardhats now plus
> the changes I suggested you do in the email to the ZU routine. I didn't
> want to add it unless you confirmed it worked OK.
>
> It seems that Mark Street found out the ?ZISF routine was missing as I
> recall, for his GTM install, so it may be missing for yours as well, but
> it may not be needed or something. I do not have Cache installed as I
> just got a new Windows machine, so I am going to post this out for someone
> who has done this to comment as I am still back working on a much older
> version with the CPRS/WIne issue.
>
> So, please fellow Hardhats, can you please give him some help here?
>
> =========================================================================
>
> On Sunday 24 April 2005 07:22 pm, Butch Jones wrote:
> > Nancy,
> > Do you have a copy of the newer instructions that you will post on
> > Hardhats? If so, care to send them to me and lets see if I can follow
>
> them to get an install up and running?
>
> > I have begun my install and have gotten down to #34 of the old install
> > notes and have run into the same problem. I don't want to change any of
> > the routines today.. Was hoping to see the new instructions that you
>
> say you have.
>
> > here is what I got when I attempted to perform step #34..
> >
> > ======================================================
> > USER>ZN "VISTA"
> >
> > VISTA>D ^ZTMGRSET
> >
> > ZTMGRSET Version 8.0 **34,36,69,94,121,127,136,191,275**
> > HELLO! I exist to assist you in correctly initializing the current
>
> account.
>
> > D UCI^%ZOSV
> > ^
> > <NOROUTINE>A+2^ZTMGRSET
> > VISTA 3x2>
> >
> > =======================================================
> >
> > I am running Cache version 5.0.13.5607.1
> > Vista (CACHE.DAT dated 2/27/2005)
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Hardhats-members mailing list
> Hardhats-members@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/hardhats-members
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Hardhats-members mailing list
> Hardhats-members@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/hardhats-members
--
Nancy Anthracite
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Hardhats-members mailing list
Hardhats-members@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hardhats-members
