Would that require them to run a separate probtrackx for each seed area? If the hits are recorded on the surface, is the distance also reported on vertices?
If you can only get the distances in white matter voxels, or only the distances from the seed point, things could get challenging if you want to use different seeding strategies. Tim On Fri, Oct 6, 2017 at 6:24 PM, Glasser, Matthew <glass...@wustl.edu> wrote: > --ompl option in probtrackx2. > > Peace, > > Matt. > > From: "Gopalakrishnan, Karthik" <gkart...@gatech.edu> > Date: Friday, October 6, 2017 at 7:05 PM > To: Timothy Coalson <tsc...@mst.edu> > > Cc: Matt Glasser <glass...@wustl.edu>, "hcp-users@humanconnectome.org" < > hcp-users@humanconnectome.org> > Subject: Re: [HCP-Users] Distance between surface ROIs in MMP > > This was useful and I shall make sure to go through the paper you > referenced, Matt, thank you both Matt and Tim! > > Tim, I notice you mention that tractography reports distances as well, > which shouldn’t have the same bias as the reported number of > streamlines/connection strength — I wasn’t really aware of this and I’ve > only been working with connection strengths so far. My network inference > procedure has just involved finding the right global threshold on the > number of streamlines so far, so any actual distances available to me would > be immensely useful w.r.t finding a better global threshold on the number > of streamlines. Could you please share how I could obtain these distances? > I suppose the files are already generated in my servers where I executed > probtrackx, so could you maybe also share what the file names would look > like? > > Regards, > Karthik > > On Oct 6, 2017, at 5:40 PM, Timothy Coalson <tsc...@mst.edu> wrote: > > Right, I wasn't very precise in my wording. I was thinking of the > "tractography distance bias" as the amount of the bias that is above and > beyond the real biological distance relationship. > > Tim > > > On Fri, Oct 6, 2017 at 4:36 PM, Glasser, Matthew <glass...@wustl.edu> > wrote: > >> It is worth noting that there IS a biological distance bias in >> connections that has been found with invasive tracers, though the mechanism >> by which this occurs in in tractography is different from the biological >> mechanism as Tim says. There’s more discussion of this in the paper I >> referenced. >> >> Peace, >> >> Matt. >> >> From: Timothy Coalson <tsc...@mst.edu> >> Date: Friday, October 6, 2017 at 5:30 PM >> To: "Gopalakrishnan, Karthik" <gkart...@gatech.edu> >> Cc: Matt Glasser <glass...@wustl.edu>, "hcp-users@humanconnectome.org" < >> hcp-users@humanconnectome.org> >> >> Subject: Re: [HCP-Users] Distance between surface ROIs in MMP >> >> Tractography's distance bias is in its reported strengths. The distances >> reported by tractography should not have a significant bias in the same way >> - while it takes longer paths less often, it doesn't often take paths that >> are even more windy and longer than the real path, and it generally can't >> take a shorter path, right? >> >> Since these paths are through the white matter, and generally follow real >> fiber directions, they are more plausible than any other available method >> of computing connection distances between areas (3D distance is wrong >> because connections don't go through CSF, geodesic distance is wrong >> because long-distance connections aren't transmitted through gray matter >> the whole way). Moreover, the tractography-reported distances should have >> a much better relationship to the tractography strength biases. >> >> To put it another way, the distance bias of tractography is not a >> *biological* effect, it is an effect of the *method* of tractography. In >> particular, the longer a probabilistic streamline gets, the wider the area >> that it could have hit gets, but much of this area gets intercepted by >> pieces of cortex before the streamline gets as long as it "should" be - >> therefore this spreading effect causes long streamlines to be rarer than >> they should be, by virtue of the streamline length itself (not as a >> function of the biological tract length). >> >> Tim >> >> >> On Fri, Oct 6, 2017 at 4:15 PM, Gopalakrishnan, Karthik < >> gkart...@gatech.edu> wrote: >> >>> Hi Matt/Tim, >>> >>> My goal is to improve network inference from tractography data by better >>> accounting for the distance bias in tractography, so I want to use some >>> proxy for actual connection distance between ROI pairs. Using tractography >>> itself to account for its own bias against long-distance connections >>> doesn’t make sense to me. >>> >>> Do you have any suggestions on how I could best compute this proxy? >>> >>> Regards, >>> Karthik >>> >>> On Oct 5, 2017, at 8:50 AM, Glasser, Matthew <glass...@wustl.edu> wrote: >>> >>> Indeed I think we would need to know what you needed the distance for to >>> know how best to compute it. For things like MR artifacts, a 3D distance >>> might be most appropriate. For something like smoothing, a geodesic >>> distance would be appropriate. For something neurobiological, the >>> tractography distance might be most appropriate. >>> >>> Peace, >>> >>> Matt. >>> >>> From: <hcp-users-boun...@humanconnectome.org> on behalf of Timothy >>> Coalson <tsc...@mst.edu> >>> Date: Tuesday, October 3, 2017 at 6:30 PM >>> To: "Gopalakrishnan, Karthik" <gkart...@gatech.edu> >>> Cc: "hcp-users@humanconnectome.org" <hcp-users@humanconnectome.org> >>> Subject: Re: [HCP-Users] Distance between surface ROIs in MMP >>> >>> Since ROIs are not points, distance between them becomes a trickier >>> question. Since areas are connected through white matter rather than gray >>> matter, that also implies that the easy ways to calculate distance may not >>> be all that biologically relevant. This would point to using tractography >>> to find distances. So, I don't think there is an easy answer, sorry. >>> >>> If you want to compute distance along the gray matter anyway, a >>> possibility is to find the center of gravity of each ROI, translate them >>> back to surface vertices (the centers will not actually be on the surface >>> anymore, so you may want to double check them), and then find geodesic >>> distances between those points (you can use -surface-geodesic-distance, >>> running it once per area - you can then get the values from the other >>> vertices near the centers to build the all-to-all matrix a row at a time). >>> Note, however, that this will not give you a distance to areas in the other >>> hemisphere. >>> >>> Tim >>> >>> >>> On Tue, Oct 3, 2017 at 5:06 PM, Gopalakrishnan, Karthik < >>> gkart...@gatech.edu> wrote: >>> >>>> Hi, >>>> >>>> I’m working with the Glasser multi-modal parcellation and I’d like to >>>> know if there is some prevalent notion of distance between any two surface >>>> ROIs in the parcellation? If there is, could you please tell me how I could >>>> obtain it or point me to a source? >>>> >>>> Thanks a lot! >>>> >>>> Regards, >>>> Karthik >>>> >>>> _______________________________________________ >>>> HCP-Users mailing list >>>> HCP-Users@humanconnectome.org >>>> http://lists.humanconnectome.org/mailman/listinfo/hcp-users >>>> >>> >>> _______________________________________________ >>> HCP-Users mailing list >>> HCP-Users@humanconnectome.org >>> http://lists.humanconnectome.org/mailman/listinfo/hcp-users >>> >>> >>> >> > > _______________________________________________ HCP-Users mailing list HCP-Users@humanconnectome.org http://lists.humanconnectome.org/mailman/listinfo/hcp-users
