I've tried the candy cane method and the staple method and found them very difficult to pound into the playa. The rebar tends to vibrate and the vibration absorbs much of the force of the sledge hammer. This year I'l be trying the acute L approach. Heat the rebar with a torch and bend the top 2.5-3" to an acute angle, about 100º from the long end. This will lock in the guy rope and still bury the end of the rebar into the playa. You can still trip on the guy rope. Also, easy to pull out with a chain and trailer hitch.
On Aug 22, 4:06 am, Julie Danger <juliedan...@gmail.com> wrote: > Hey all, I'm catching up (very late!) on my gmail. > > Saw some stuff on rope halos, thought I'd put my two cents in: > > I like a really long rope for the halo itself, because I want to be able to > reach it and adjust things. It's quite long because I can't really reach > much more than 3 foot up the roof. We use a pretty thick rope (about 1/2 > inch?) for the halo. We use quite small diameter rope for the guy lines > because you can make really good knots with smaller rope--more like what is > sold as "clothesline." Mr Camp of Camp-Danger is the rigging/rockclimbing > expert, this wisdom he imparts on to me. > > As for rebar, I cannot stop recommending *'rebar staples.'* You can make > your own out of thinner rebar-- bend them into a croquet wicket shape with a > vice or anything that will hold them still. Pound them into the ground in > the shape of an upsidedown teardrop, with the ends touching. They pull out > very easily and don't leave an exposed sharp thing to trip on. I however > manage to trip over my guy wires anyway. > > Additionally I am playa-testing some alternative tapes this year, to see if > we can find something more UV resistant than the bidirectional filament > tape. If you have a sample or recommendation, contact me! > > Happy burning everyone! > Julie Danger > > > > > > > > On Mon, Aug 8, 2011 at 9:01 AM, <hexayurt+nore...@googlegroups.com> wrote: > > Today's Topic Summary > > > Group:http://groups.google.com/group/hexayurt/topics > > > - Rope Halo <#131aa21138504097_group_thread_0> [2 Updates] > > > Topic: Rope > > Halo<http://groups.google.com/group/hexayurt/t/6ab2ca3932dd9ee> > > > aQui <luckya...@gmail.com> Aug 07 08:59AM -0700 > > ^<#131aa21138504097_digest_top> > > > I'm thinking of using 6 tie down straps to secure the rope halo. > > Using the hooks to tie in to the halo, and the middle of the strap > > looping through the rebar candy canes. > > > If i was going to do this with six ratcheting tie downs how long would > > I need them to be? > > > Also, any ideas for protecting the edges of the yurt the tie downs > > would be rubbing against? > > > Also, do you think it necessary to wrap the rebar in something so the > > tie down straps aren't being worn thru? > > > Much love to this group, > > > aQui > > > Richard Ginn <richardg...@gmail.com> Aug 07 04:31PM -0400 > > ^<#131aa21138504097_digest_top> > > > Climbing ropes, especially those with a core that is not visible, are > > sometimes laid over carpeting so the sharp edge of the rock doesn't > > wear > > them out. That would probably work for the rebar. > > > Maybe a thicker carpeting mat would work for the roof/wall edge? Or > > maybe > > the force of the tie down would still damage the edge, so something to > > spread the force out over a longer distance might be needed. If you > > could > > safely split a plastic pipe down the middle that might work, like with > > a > > band saw? Cutting plastic pipe that way is a recipe for cutting your > > hand > > open too, so be careful. > > > -- > > You received this message because you are subscribed to the Google Groups > > "hexayurt" group. > > To post to this group, send email to hexayurt@googlegroups.com. > > To unsubscribe from this group, send email to > > hexayurt+unsubscr...@googlegroups.com. > > For more options, visit this group at > >http://groups.google.com/group/hexayurt?hl=en. -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To post to this group, send email to hexayurt@googlegroups.com. To unsubscribe from this group, send email to hexayurt+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/hexayurt?hl=en.
