NULL may be useful to some, but should NOT be mandated (should rather than must). It's another knob that could be set incorrectly and bypass the encryption. Not all products will want or need NULL.
Paul ]-----Original Message----- ]From: Hipsec [mailto:[email protected]] On Behalf Of Michael ]Richardson ]Sent: Tuesday, July 08, 2014 11:00 AM ]To: Stephen Farrell ]Cc: [email protected]; [email protected] ]Subject: Re: [Hipsec] [saag] NULL encryption mode in RFC 5202-bis ] ] ]Stephen Farrell <[email protected]> wrote: ] > Generic: is it still considered a good plan to have null ] > confidentiality suites such as these? Or for those to be ] > Mandatory-To-Implement (MTI)? That clearly was the generic ]consensus as ] > we have these in a number of protocols. The new reasons to move ]from ] > that I think are: 1) we no longer need this for debugging purposes ] > really since libraries and dev tools have moved on and are better ]now, ] > and we specifically no longer need these for protocols that are no ] > longer new, 2) BCP188 could be considered to argue against having ]these ] ]There are an incredible number of systems (Linux with stock-in-kernel ]NETKEY IPsec for instance), where it is impossible or very very ]difficult to get a packet capture of the traffic after decryption, but ]before it goes up the protocol stack. ] ]On such systems, if you have a problem in the field with a protocol that ]runs over ESP (whether HIP or IKEv2 keyed), and you can't figure out how ]it works, and it appears to with without ESP, then the lack of debugging ]means that you turn off all security. ] ]ESP-authenticated-with-NULL-encryption is debuggable in the field. ]Not having it, means turning off ESP; and if the problem is in the link ]between the ESP layer and the upper layer, then... ] ]-- ]Michael Richardson <[email protected]>, Sandelman Software Works -= ]IPv6 IoT consulting =- ] ] _______________________________________________ Hipsec mailing list [email protected] https://www.ietf.org/mailman/listinfo/hipsec
