Hi,
the blades are packed with a tiny, bit of oil. This can cause you to not obtain
a ribbon.
Try gently cleaning with xylene, followed by alcohol before sectioning. Paula
Keene Pierce, BS, HTL(ASCP)HTPresidentExcalibur Pathology, Inc.5830 N Blue Lake
DriveNorman, OK 73069PH 405-759-3953FAX 405-759-7513www.excaliburpathology.com
From: Gareth Davis via Histonet <[email protected]>
To: "[email protected]" <[email protected]>
Sent: Tuesday, April 11, 2017 11:55 AM
Subject: [Histonet] No Ribbon
I feel like I should be able to figure this one out, but I have been having
trouble with getting a ribbon for a while now. I have a Leica Microtome
RM2125 and I use either a AccuEdge blade (I get one block to cut then it
starts to compress) or a StatCut blade (sections do not stick together at
all), both High Profile. The angle is about 4 microns. I change the angle
a lot to see if that makes a difference and it doesn't. There are so many
factors that could be the issue, I think lack of humidity may be the main
one. So, suggestions please!!
--
Ms. Gareth B. Davis, B.S., HT, QIHC (ASCP)cm
Yuma Gastroenterology
Yuma, AZ 85364
928-248-5259
_______________________________________________
Histonet mailing list
[email protected]
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
_______________________________________________
Histonet mailing list
[email protected]
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
