On Wed, 9 Jan 2008 [EMAIL PROTECTED] wrote:
> Quoting Gary Stanley <[EMAIL PROTECTED]>: > > > At 12:45 PM 1/9/2008, [EMAIL PROTECTED] wrote: > > > >> It's not the end of the world. I've simply been rsync'ing with > >> another machine running RELENG_6 to keep my directory structure up to > >> date. Oddly enough, it is only the steam binary that causes me any > >> issues. My servers run perfectly fine otherwise. > >> > >> Perhaps this is something that the people from Valve could comment on? > >> > >> Patrick > > > > Are your other machines that this binary works on, 64bit as well? > > > > Unfortunately no. They are not even the same hardware, so I cannot > form a basis of comparison to track down the culprit. > > On the RELENG_7 64bit machine, the steam binary causes these issues, > but the srcds binary works fine. > > On the RELENG_6 32bit machine, the steam binary works fine and I've > been using this to rsync to the RELENG_7 machine and the srcds also > works fine. I have had troubles to run the steambinary in FreeBSD since 5.x. Some things to check: What kernelversion are you using in the linuxulator? It might be something missing in the linuxulator. Try both 2.4.2 and 2.6.18 ( Dont remember if it is .18, you might want to check that out first ) Also are you using SMP? I have troubles running the steambinary when SMP is enabled. Same machine without the SMP, it runs OK. At least that was the issue when I tried it with 5.x, but that was million of years ago. I use a central server to check out everything from steam. That server is running FreeBSD 4.11. Then I just make a gzipped tarball out of the changes and push the data out to the servers. A little primitive, but it works. Plus I can do a rollback if necissary. /Bjorn _______________________________________________ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlds_linux
