I tried both the installer and the manual build.
Here's hp-check [EMAIL PROTECTED] ~]# hp-check HP Linux Imaging and Printing System (ver. 1.6.10) Dependency/Version Check Utility ver. 4.0 Copyright (c) 2003-6 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. --------------- | SYSTEM INFO | --------------- Basic system info (uname -a): --> Linux bucket 2.6.17-5mdv #1 SMP Wed Sep 13 14:32:31 EDT 2006 i686 Intel(R) Pentium(R) 4 CPU 2.40GHz unknown GNU/Linux Detected distro (/etc/issue): --> mandriva 2006.0 Detected distro (lsb_release): --> MandrivaLinux 2006.0 (Cooker) Currently installed version... --> OK, HPLIP 1.6.10 currently installed in '/usr/share/hplip'. Current contents of '/etc/hp/hplip.conf' file: # hplip.conf [hpiod] # port=0 (dynamic IP port) port=2208 (IANA IP port) [hpssd] # port=0 (dynamic IP port) port=2207 (IANA IP port) [hplip] version=1.6.10 jdprobe=0 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/HP doc=/usr/share/doc/hplip-1.6.10 # Following values are determined at configure time and cannot be changed. [configure] network-build=1 pp-build=0 gui-build=1 scanner-build=1 fax-build=1 internal-tag=1.6.10.11 HPLIP running? --> Yes, HPLIP is running (OK). HPOJ running? --> No, HPOJ is not running (OK). Checking Python version... --> OK, version 2.4.1 installed ---------------- | DEPENDENCIES | ---------------- Checking for dependency 'libcrypto (libcrypto - OpenSSL cryptographic library)'... --> OK, found.Checking for dependency 'gcc (gcc - GNU Project C and C++ Compiler)'... --> OK, found. Checking for dependency 'sane (SANE - Scanning library)'... --> OK, found. Checking for dependency 'gs (GhostScript - PostScript and PDF language interpreter and previewer)'... --> OK, found. Checking for dependency 'libjpeg (libjpeg - JPEG library)'... --> OK, found. Checking for dependency 'libpthread (libpthread - POSIX threads library)'... --> OK, found. Checking for dependency 'make (make - GNU make utility to maintain groups of programs)'... --> OK, found. Checking for dependency 'python-devel (python-devel - Python development files)'... --> OK, found. Checking for dependency 'reportlab (Reportlab - PDF library for Python)'... --> OK, found. Checking for dependency 'pyqt (PyQt - Qt interface for Python)'... --> OK, found. Checking for dependency 'cups-devel (cups-devel- Common Unix Printing System development files)'... --> OK, found. Checking for dependency 'ppdev (ppdev - Parallel port support kernel module.)'... --> OK, found. Checking for dependency 'libusb (libusb - USB library)'... --> OK, found. Checking for dependency 'scanimage (scanimage - Shell scanning program)'... --> OK, found. Checking for dependency 'libnetsnmp-devel (libnetsnmp-devel - SNMP networking library development files)'... --> OK, found. Checking for dependency 'python2x (Python 2.2 or greater - Python programming la nguage)'... --> OK, found. Checking for dependency 'lsb (LSB - Linux Standard Base support)'... --> OK, found. Checking for dependency 'xsane (xsane - Graphical scanner frontend for SANE)'.. error: Not found! This is an OPTIONAL dependency. Checking for dependency 'cups (cups - Common Unix Printing System)'... --> OK, found. Checking for dependency 'python23 (Python 2.3 or greater - Required for fax func tionality)'... --> OK, found. ---------------------- | INSTALLED PRINTERS | ---------------------- No queues found. ---------------------- | SANE CONFIGURATION | ---------------------- 'hpaio' in /etc/sane.d/dll.conf'... --> OK, found. SANE backend 'hpaio' is not properly set up. Checking output of 'scanimage -L'... No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). --------------------- | PYTHON EXTENSIONS | --------------------- Checking 'cupsext' CUPS extension... --> OK, found. Checking 'pcardext' Photocard extension... --> OK, found. %d errors were detected. Please refer to the installation instructions at: http://hplip.sourceforge.net/install/index.html On Tue, 24 Oct 2006, Aaron J Albright wrote: > Did you go through the instructions here: > > http://hplip.sourceforge.net/install/step2/mandriva06.html > > or did you use the installer? > > Can you run hp-check and post the output? > > Thanks! > > A > > Mandi wrote: >> >> That's where i am now. took all the hpoj stuff off after the upgrade to >> mandriva 2006, tried the rpms from mandriva 2006 and 2007 and got nothing. >> Now i have the 1.6.10 software built by hand, and still nothing. Are >> there other dependencies? kernel is 2.6.17-5mdv and ppdev is loaded. >> >> [EMAIL PROTECTED] ~]$ hp-info >> >> HP Linux Imaging and Printing System (ver. 1.6.10) >> Device Information Utility ver. 3.4 >> >> Copyright (c) 2003-6 Hewlett-Packard Development Company, LP >> This software comes with ABSOLUTELY NO WARRANTY. >> This is free software, and you are welcome to distribute it >> under certain conditions. See COPYING file for more details. >> >> error: No devices found. >> error: Error occured during interactive mode. Exiting. >> >> >> >> On Tue, 24 Oct 2006, Aaron J Albright wrote: >> >>> HPOJ will not work with HPLIP. >>> >>> I have tested hplip on Mandriva 2006 and it works well. So if possible >>> remove hpoj and install hplip and we can troubleshoot whatever problems >>> you are having. It should work though! >>> >>> Try hplip 1.6.10? >>> >>> A >>> >>> Mandi wrote: >>>> I was using HPOJ on mandrake 10.0 and 10.1 before an upgrade to >>>> mandriva 2006, and HPLIP doesn't. >>>> >>>> Is there still a way to put HPOJ together? I'd like to get my scanner >>>> back. ;) >>>> >>>> >>>> >>>> >>>> On Mon, 23 Oct 2006, Aaron J Albright wrote: >>>> >>>>> You are using HPOJ and it works or are you using hplip? >>>>> >>>>> A >>>>> >>>>> Mandi wrote: >>>>>> This printer kicked total printer butt under HPOJ. The printer >>>>>> and scanner worked, no problem. >>>>>> >>>>>> This is what i get when i unplug the usb and plug is back in: >>>>>> >>>>>> Oct 23 18:01:22 localhost kernel: usb 1-1: USB disconnect, address >>>>>> 4 >>>>>> Oct 23 18:01:22 localhost kernel: drivers/usb/class/usblp.c: >>>>>> usblp0: removed >>>>>> Oct 23 18:01:22 localhost cups: cupsd -HUP succeeded >>>>>> Oct 23 18:01:25 localhost kernel: usb 1-1: new full speed USB >>>>>> device using uhci_hcd and address 5 >>>>>> Oct 23 18:01:25 localhost kernel: usb 1-1: configuration #1 chosen >>>>>> from 1 choice >>>>>> Oct 23 18:01:25 localhost kernel: drivers/usb/class/usblp.c: >>>>>> usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid >>>>>> 0x03F0 pid 0x3A11 >>>>>> Oct 23 18:01:25 localhost udev[28894]: run_program: exec of >>>>>> program failed >>>>>> Oct 23 18:01:25 localhost pam_console.dev[28915]: Restoring >>>>>> console permissions for /dev/usbdev1.5 >>>>>> Oct 23 18:01:26 localhost cups: cupsd -HUP succeeded >>>>>> Oct 23 18:01:28 localhost autosetupprintqueues[29091]: ### Program >>>>>> is starting ### >>>>>> Oct 23 18:01:28 localhost udev[29101]: run_program: exec of >>>>>> program failed >>>>>> Oct 23 18:01:28 localhost pam_console.dev[29104]: Restoring >>>>>> console permissions for /dev/usb/lp0 >>>>>> Oct 23 18:01:28 localhost autosetupprintqueues[29091]: launched >>>>>> command: exportDISPLAY="localhost:0.0"; export USER=mandi; [ -r >>>>>> /etc/sysconfig/i18n ] >> /dev/null 2>&1 && for l in `cat >>>>>> /etc/sysconfig/i18n`; do export $l; done >> /dev/null2>&1; [ -r >>>>>> /home/mandi/.i18n ] >> /dev/null 2>&1 && for l in `cat >>>>>> /home/mandi/.i18n`; do export $l; done >> /dev/null 2>&1; export >>>>>> XAUTHORITY=/home/mandi/.Xauthority; /usr/sbin/printerdrake >>>>>> --onlyautoqueue >>>>>>>> /dev/null 2>&1; >>>>>> Oct 23 18:01:28 localhost printerdrake[29119]: ### Program is >>>>>> starting ### >>>>>> Oct 23 18:01:34 localhost autosetupprintqueues[29091]: ### Program >>>>>> is exiting ## >>>>>> >>>>>> >>>>>> thanks, >>>>>> --mandi >>>>>> >>>>>> On Mon, 23 Oct 2006, Aaron J Albright wrote: >>>>>> >>>>>>> Has the printer worked before? >>>>>>> >>>>>>> Can you disconnect the printer run: tail -f /var/log/messages >>>>>>> and plug the printer back in and post any output in >>>>>>> /var/log/messages? >>>>>>> >>>>>>> Thanks! >>>>>>> >>>>>>> Aaron >>>>>>> >>>>>>> Mandi wrote: >>>>>>>> It's a USB connection. >>>>>>>> >>>>>>>> [EMAIL PROTECTED] ~]$ /usr/lib/cups/backend/hp >>>>>>>> direct hp:/no_device_found "Unknown" "hp no_device_found" >>>>>>>> >>>>>>>> Thanks, >>>>>>>> >>>>>>>> --mandi >>>>>>>> >>>>>>>> >>>>>>>> On Mon, 23 Oct 2006, Aaron J Albright wrote: >>>>>>>> >>>>>>>>> Are you connecting the printer via usb, parallel or network? >>>>>>>>> >>>>>>>>> Can you run: >>>>>>>>> >>>>>>>>> /usr/lib/cups/backend/hp >>>>>>>>> >>>>>>>>> and post the output? >>>>>>>>> >>>>>>>>> Thanks. >>>>>>>>> >>>>>>>>> A >>>>>>>>> >>>>>>>>> Mandi wrote: >>>>>>>>>> Aaron -- >>>>>>>>>> Thanks for the suggestion. >>>>>>>>>> >>>>>>>>>> I deleted all the hplip software i had installed on the >>>>>>>>>> system, removed the printer from CUPS as a usb:// device, >>>>>>>>>> and installed hplip 1.6.10 from the installer on >>>>>>>>>> sourceforge. >>>>>>>>>> >>>>>>>>>> hp-setup does not discover the printer. A popup window >>>>>>>>>> reports "No devices found. Please make sure your printer >>>>>>>>>> is properly connected and powered-on". >>>>>>>>>> >>>>>>>>>> I have the ppdev module loaded in the kernel, bus lsusb >>>>>>>>>> and the hp tools show nothing. I tried a couple of the >>>>>>>>>> kernels i have laying around, they are all 2.6. >>>>>>>>>> >>>>>>>>>> Anything else I should look for? >>>>>>>>>> >>>>>>>>>> thanks, >>>>>>>>>> --mandi >>>>>>>>>> >>>>>>>>>> On Fri, 20 Oct 2006, Aaron J Albright wrote: >>>>>>>>>> >>>>>>>>>>> For the HP tools to work the printer needs to use the >>>>>>>>>>> hp:/ backend. Would it be possible to remove hplip and >>>>>>>>>>> install using the source from hplip.sf.net? >>>>>>>>>>> >>>>>>>>>>> If not try deleting the printer queues and run hp-setup >>>>>>>>>>> to configure the printer. I could never get >>>>>>>>>>> printerdrake to do it correctly, and it's rather more >>>>>>>>>>> difficult. >>>>>>>>>>> >>>>>>>>>>> Hope this helps. >>>>>>>>>>> >>>>>>>>>>> A >>>>>>>>>>> >>>>>>>>>>> Mandi wrote: >>>>>>>>>>>> Hi. >>>>>>>>>>>> >>>>>>>>>>>> I have an Office Jet 5510, that was working very well >>>>>>>>>>>> with HPOJ and Mandrake 10.1. I recently upgraded to >>>>>>>>>>>> Mandriva 2006 to resolve other issues on the host, and >>>>>>>>>>>> have lost the ability to use the printer and scanner >>>>>>>>>>>> functions (i've never tried the faxing from the >>>>>>>>>>>> computer). >>>>>>>>>>>> >>>>>>>>>>>> I removed all of the HPOJ software that wasn't caught >>>>>>>>>>>> by rpm dependencies, but the MDV versions of HPLIP for >>>>>>>>>>>> 2006 didn't work at all with the printer, either as >>>>>>>>>>>> usb:// or hp:/ >>>>>>>>>>>> >>>>>>>>>>>> so, i have built the 1.6.9 HPLIP software from the >>>>>>>>>>>> Mandriva 2007 RC srpms. I have the following >>>>>>>>>>>> installed: >>>>>>>>>>>> >>>>>>>>>>>> hplip-1.6.9-0.1.20060mdk >>>>>>>>>>>> hplip-model-data-1.6.9-0.1.20060mdk >>>>>>>>>>>> hplip-hpijs-ppds-1.6.9-0.1.20060mdk >>>>>>>>>>>> hplip-hpijs-1.6.9-0.1.20060mdk >>>>>>>>>>>> >>>>>>>>>>>> I have these sane packages installed: >>>>>>>>>>>> libsane1-1.0.16-5mdk >>>>>>>>>>>> libsane1-devel-1.0.16-5mdk >>>>>>>>>>>> libsane-hpaio1-1.6.9-0.1.20060mdk (from hplip srpm) >>>>>>>>>>>> sane-backends-1.0.16-5mdk >>>>>>>>>>>> sane-frontends-1.0.13-2mdk >>>>>>>>>>>> xsane-0.97-2mdk >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> After installing these versions, printerdrake was able >>>>>>>>>>>> to find the printer, and installed it with a usb:// >>>>>>>>>>>> uri into CUPS. none of the HP utilities work, and CUPS >>>>>>>>>>>> doesn't see the printer as an hp:/ device. I see the >>>>>>>>>>>> hp "no device found" listings for printer and scanner >>>>>>>>>>>> devices in the CUPS options when trying to install the >>>>>>>>>>>> device by hand. With the usb:// uri, i can print to >>>>>>>>>>>> the printer but sane does not see any scanners. >>>>>>>>>>>> >>>>>>>>>>>> I've tried manually switching the device uri in >>>>>>>>>>>> /etc/cups/printers.conf to >>>>>>>>>>>> DeviceURI different hp:/usb/ uris, but I haven't hit >>>>>>>>>>>> on one that comes up as a supported model name. >>>>>>>>>>>> >>>>>>>>>>>> The hp daemons are running >>>>>>>>>>>> root 2778 0.0 0.1 37364 1288 ? Ss >>>>>>>>>>>> Oct19 0:00 ./hpiod >>>>>>>>>>>> root 2791 0.0 0.8 9128 5620 ? S >>>>>>>>>>>> Oct19 0:09 python ./hpssd.py >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Is there something else I can look for? The output of >>>>>>>>>>>> hp-check is below. >>>>>>>>>>>> >>>>>>>>>>>> thanks, >>>>>>>>>>>> --mandi >>>>>>>>>>>> >>>>>>>>>>>> (xsane is installed; i have a magic cookie problem i'm >>>>>>>>>>>> also working on since upgrading) >>>>>>>>>>>> >>>>>>>>>>>> [EMAIL PROTECTED] ~]$ hp-check >>>>>>>>>>>> >>>>>>>>>>>> HP Linux Imaging and Printing System (ver. 1.6.9) >>>>>>>>>>>> Dependency/Version Check Utility ver. 3.1 >>>>>>>>>>>> >>>>>>>>>>>> Copyright (c) 2003-6 Hewlett-Packard Development >>>>>>>>>>>> Company, LP >>>>>>>>>>>> This software comes with ABSOLUTELY NO WARRANTY. >>>>>>>>>>>> This is free software, and you are welcome to >>>>>>>>>>>> distribute it >>>>>>>>>>>> under certain conditions. See COPYING file for more >>>>>>>>>>>> details. >>>>>>>>>>>> >>>>>>>>>>>> Basic system info... --> Linux bucket 2.6.17-5mdv #1 >>>>>>>>>>>> SMP Wed Sep 13 14:32:31 EDT 2006 i686 Intel(R) >>>>>>>>>>>> Pentium(R) 4 CPU 2.40GHz unknown GNU/Linux >>>>>>>>>>>> >>>>>>>>>>>> Currently installed version... >>>>>>>>>>>> --> OK, HPLIP 1.6.9 currently installed. >>>>>>>>>>>> >>>>>>>>>>>> HPLIP running? --> Yes, HPLIP is running (OK). >>>>>>>>>>>> >>>>>>>>>>>> HPOJ running? --> No, HPOJ is not running (OK). >>>>>>>>>>>> >>>>>>>>>>>> Checking Python version... >>>>>>>>>>>> --> OK, version 2.4.1 installed >>>>>>>>>>>> Checking for dependency 'libcrypto (libcrypto - >>>>>>>>>>>> OpenSSL cryptographic library)'... >>>>>>>>>>>> --> OK, found. >>>>>>>>>>>> >>>>>>>>>>>> Checking for dependency 'gcc (gcc - GNU Project C and >>>>>>>>>>>> C++ Compiler)'... --> OK, found. >>>>>>>>>>>> >>>>>>>>>>>> Checking for dependency 'sane (SANE - Scanning >>>>>>>>>>>> library)'... >>>>>>>>>>>> --> OK, found. >>>>>>>>>>>> >>>>>>>>>>>> Checking for dependency 'gs (GhostScript - PostScript >>>>>>>>>>>> and PDF language interpreter and previewer)'... >>>>>>>>>>>> --> OK, found. >>>>>>>>>>>> >>>>>>>>>>>> Checking for dependency 'libjpeg (libjpeg - JPEG >>>>>>>>>>>> library)'... >>>>>>>>>>>> --> OK, found. >>>>>>>>>>>> >>>>>>>>>>>> Checking for dependency 'libpthread (libpthread - >>>>>>>>>>>> POSIX threads library)'... >>>>>>>>>>>> --> OK, found. >>>>>>>>>>>> >>>>>>>>>>>> Checking for dependency 'make (make - GNU make utility >>>>>>>>>>>> to maintain groups of programs)'... >>>>>>>>>>>> --> OK, found. >>>>>>>>>>>> Checking for dependency 'python-devel (python-devel - >>>>>>>>>>>> Python development files)'... >>>>>>>>>>>> --> OK, found. >>>>>>>>>>>> >>>>>>>>>>>> Checking for dependency 'reportlab (Reportlab - PDF >>>>>>>>>>>> library for Python)'... >>>>>>>>>>>> --> OK, found. >>>>>>>>>>>> >>>>>>>>>>>> Checking for dependency 'pyqt (PyQt - Qt interface for >>>>>>>>>>>> Python)'... >>>>>>>>>>>> --> OK, found. >>>>>>>>>>>> >>>>>>>>>>>> Checking for dependency 'cups-devel (cups-devel- >>>>>>>>>>>> Common Unix Printing System development files)'... >>>>>>>>>>>> --> OK, found. >>>>>>>>>>>> >>>>>>>>>>>> Checking for dependency 'ppdev (ppdev - Parallel port >>>>>>>>>>>> support kernel module.)'... >>>>>>>>>>>> --> OK, found. >>>>>>>>>>>> >>>>>>>>>>>> Checking for dependency 'libusb (libusb - USB >>>>>>>>>>>> library)'... --> OK, found. >>>>>>>>>>>> >>>>>>>>>>>> Checking for dependency 'scanimage (scanimage - Shell >>>>>>>>>>>> scanning program)'... >>>>>>>>>>>> --> OK, found. >>>>>>>>>>>> >>>>>>>>>>>> Checking for dependency 'libnetsnmp-devel >>>>>>>>>>>> (libnetsnmp-devel - SNMP networking library >>>>>>>>>>>> development files)'... >>>>>>>>>>>> --> OK, found. >>>>>>>>>>>> >>>>>>>>>>>> Checking for dependency 'python2x (Python 2.2 or >>>>>>>>>>>> greater - Python programming language)'... >>>>>>>>>>>> --> OK, found. >>>>>>>>>>>> >>>>>>>>>>>> Checking for dependency 'lsb (LSB - Linux Standard >>>>>>>>>>>> Base support)'... >>>>>>>>>>>> --> OK, found. >>>>>>>>>>>> >>>>>>>>>>>> Checking for dependency 'xsane (xsane - Graphical >>>>>>>>>>>> scanner frontend for SANE)'... >>>>>>>>>>>> error: Not found! >>>>>>>>>>>> >>>>>>>>>>>> Checking for dependency 'cups (cups - Common Unix >>>>>>>>>>>> Printing System)'... --> OK, found. >>>>>>>>>>>> >>>>>>>>>>>> Checking for dependency 'python23 (Python 2.3 or >>>>>>>>>>>> greater - Required for fax functionality)'... >>>>>>>>>>>> --> OK, found. >>>>>>>>>>>> >>>>>>>>>>>> Checking existing CUPS queues... Printer Device >>>>>>>>>>>> URI HPLIP Installed? >>>>>>>>>>>> ------------ >>>>>>>>>>>> ------------------------------------------------------ >>>>>>>>>>>> -------------------- >>>>>>>>>>>> HPOffJet5500 >>>>>>>>>>>> usb://hp/officejet%205500%20series?serial=MY47UG119M96 >>>>>>>>>>>> No >>>>>>>>>>>> note: Any CUPS queues that are not 'HPLIP Installed', >>>>>>>>>>>> must be installed >>>>>>>>>>>> note: with the 'hp:' or 'hpfax:' backends to have them >>>>>>>>>>>> work in HPLIP. Refer >>>>>>>>>>>> note: to the install instructions on >>>>>>>>>>>> http://hplip.sourceforge.net for more help. >>>>>>>>>>>> >>>>>>>>>>>> If any errors or warnings were reported, please refer >>>>>>>>>>>> to the installation instructions at: >>>>>>>>>>>> http://hplip.sourceforge.net/install/index.html >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> ------------------------------------------------------------------------- >>>>>>>>>>>> >>>>>>>>>>>> Using Tomcat but need to do more? Need to support web >>>>>>>>>>>> services, security? >>>>>>>>>>>> Get stuff done quickly with pre-integrated technology >>>>>>>>>>>> to make your job easier >>>>>>>>>>>> Download IBM WebSphere Application Server v.1.0.1 >>>>>>>>>>>> based on Apache Geronimo >>>>>>>>>>>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >>>>>>>>>>>> >>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>> HPLIP-Help mailing list >>>>>>>>>>>> HPLIP-Help@lists.sourceforge.net >>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/hplip-help >>>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ------------------------------------------------------------------------- >>>>>>>>>> >>>>>>>>>> Using Tomcat but need to do more? Need to support web >>>>>>>>>> services, security? >>>>>>>>>> Get stuff done quickly with pre-integrated technology to >>>>>>>>>> make your job easier >>>>>>>>>> Download IBM WebSphere Application Server v.1.0.1 based on >>>>>>>>>> Apache Geronimo >>>>>>>>>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> HPLIP-Help mailing list >>>>>>>>>> HPLIP-Help@lists.sourceforge.net >>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/hplip-help >>>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> ------------------------------------------------------------------------- >>>>>>>> >>>>>>>> Using Tomcat but need to do more? Need to support web >>>>>>>> services, security? >>>>>>>> Get stuff done quickly with pre-integrated technology to make >>>>>>>> your job easier >>>>>>>> Download IBM WebSphere Application Server v.1.0.1 based on >>>>>>>> Apache Geronimo >>>>>>>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> HPLIP-Help mailing list >>>>>>>> HPLIP-Help@lists.sourceforge.net >>>>>>>> https://lists.sourceforge.net/lists/listinfo/hplip-help >>>>>>>> >>>> >>>> >>>> ------------------------------------------------------------------------- >>>> Using Tomcat but need to do more? Need to support web services, >>>> security? >>>> Get stuff done quickly with pre-integrated technology to make your job >>>> easier >>>> Download IBM WebSphere Application Server v.1.0.1 based on Apache >>>> Geronimo >>>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >>>> _______________________________________________ >>>> HPLIP-Help mailing list >>>> HPLIP-Help@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/hplip-help >>>> >>> >> > ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ HPLIP-Help mailing list HPLIP-Help@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hplip-help
