sure here you go, also attached is the cups page log all the jobs were submitted at the same time but the delay between them is huge, and each is just a full 8x10 image.
HP Linux Imaging and Printing System (ver. 1.6.10 )
Dependency/Version Check Utility ver. 4.0

Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


---------------
| SYSTEM INFO |
---------------

Basic system info (uname -a):                                                   --> Linux gaudi 2.6.17.1 #5 Thu Jul 6 20:47:21 EDT 2006 i686 i686 i386 GNU/Linux

Detected distro (/etc/issue):
--> suse 10.1

Detected distro (lsb_release):
error: lsb_release not found.

Currently installed version...
--> OK, HPLIP 1.6.10 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf

[hpiod]
# port=0 (dynamic IP port)
port=2208 (IANA IP port)
[hpssd]
# port=0 (dynamic IP port)
port=2207 (IANA IP port)

[hplip]
version=1.6.10
jdprobe=0

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
doc=/usr/share/doc/hplip-1.6.10

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=1
pp-build=0
gui-build=1
scanner-build=1
fax-build=1
internal-tag= 1.6.10.11


HPLIP running?                                                                  --> Yes, HPLIP is running (OK).

HPOJ running?                                                                   --> No, HPOJ is not running (OK).

Checking Python version...
--> OK, version 2.4.2 installed

----------------
| DEPENDENCIES |
----------------
                                                                               
Checking for dependency 'libcrypto (libcrypto - OpenSSL cryptographic library)'...
--> OK, found.

Checking for dependency 'gcc (gcc - GNU Project C and C++ Compiler)'...         --> OK, found.

Checking for dependency 'sane (SANE - Scanning library)'...
--> OK, found.

Checking for dependency 'gs (GhostScript - PostScript and PDF language interpreter and previewer)'...                                                           --> OK, found.

Checking for dependency 'libjpeg (libjpeg - JPEG library)'...
--> OK, found.

Checking for dependency 'libpthread (libpthread - POSIX threads library)'...
--> OK, found.

Checking for dependency 'make (make - GNU make utility to maintain groups of programs)'...                                                                      --> OK, found.

Checking for dependency 'python-devel (python-devel - Python development files)'...
--> OK, found.

Checking for dependency 'reportlab (Reportlab - PDF library for Python)'...
error: Not found!
This is an OPTIONAL dependency.

Checking for dependency 'pyqt (PyQt - Qt interface for Python)'...
--> OK, found.

Checking for dependency 'cups-devel (cups-devel- Common Unix Printing System development files)'...
--> OK, found.

Checking for dependency 'ppdev (ppdev - Parallel port support kernel module.)'...                                                                               error: Not found!
error: This is a REQUIRED dependency.

Checking for dependency 'libusb (libusb - USB library)'...                      --> OK, found.

Checking for dependency 'scanimage (scanimage - Shell scanning program)'...     --> OK, found.

Checking for dependency 'libnetsnmp-devel (libnetsnmp-devel - SNMP networking library development files)'...
--> OK, found.

Checking for dependency 'python2x (Python 2.2 or greater - Python programming language)'...
--> OK, found.

Checking for dependency 'lsb (LSB - Linux Standard Base support)'...
--> OK, found.

Checking for dependency 'xsane (xsane - Graphical scanner frontend for SANE)'...
--> OK, found.

Checking for dependency 'cups (cups - Common Unix Printing System)'...          --> OK, found.

Checking for dependency 'python23 (Python 2.3 or greater - Required for fax functionality)'...
--> OK, found.


----------------------
| INSTALLED PRINTERS |
----------------------
                                                                               
hp_color_LaserJet_2550
----------------------
Device URI: hp:/usb/hp_color_LaserJet_2550_series?serial=00CNGHB22794
Installed in HPLIP? Yes
PPD: /etc/cups/ppd/hp_color_LaserJet_2550.ppd
PPD Description: HP Color LaserJet 2550 Series Postscript (recommended)        
Printer status:
printer hp_color_LaserJet_2550 is idle.  enabled since Jan 01 00:00
        ready to print



----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in /etc/sane.d/dll.conf'...
--> OK, found. SANE backend 'hpaio' is not properly set up.

Checking output of 'scanimage -L'...                                           
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).


---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
--> OK, found.

Checking 'pcardext' Photocard extension...
--> OK, found.


%d errors were detected.
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html


hp_color_LaserJet_2550 Bridget 478 [25/Oct/2006:16:05:28 -0400] 1 1 - 192.168.11.100
hp_color_LaserJet_2550 Bridget 479 [25/Oct/2006:16:24:46 -0400] 1 1 - 192.168.11.100
hp_color_LaserJet_2550 Bridget 479 [25/Oct/2006:16:43:37 -0400] 2 1 - 192.168.11.100
hp_color_LaserJet_2550 Bridget 479 [25/Oct/2006:17:02:32 -0400] 3 1 - 192.168.11.100
hp_color_LaserJet_2550 Bridget 479 [25/Oct/2006:17:21:37 -0400] 4 1 - 192.168.11.100
hp_color_LaserJet_2550 Bridget 480 [25/Oct/2006:17:37:58 -0400] 1 1 - 192.168.11.100
hp_color_LaserJet_2550 Bridget 481 [25/Oct/2006:17:54:25 -0400] 1 1 - 192.168.11.100


On 10/25/06, Aaron J Albright <[EMAIL PROTECTED] > wrote:
I tested your document on a CLJ2500 and the pdf prints out in no time at
all.  Can you run hp-check and post the output?

Thanks!

Aaron

Phil Schleper wrote:
> Hi all,
>  I just migrated my CLJ2550 from the usb backend using to the HP backend
> using HPLIP 1.6.10, and suddenly postscript photo performance is now
> horribly slow, it now takes it at least 20 minutes to process a single
> full page photo or color pdf  that prior took 2 minutes, using the usb
> backend.  Text performance is still reasonable.  It does not seem to
> matter if the print process comes from the local machine or is printed
> to it via samba or ipp from windows or mac clients.
> Any ideas, i made no change other than uninstalling the old SuSe 10
> supplied hplip (believe it was 1.6.7) rpm and the HP-officejet rpm
> before using the new 1.6.10 installer.
> thanks
> -Phil
>
>
> ------------------------------------------------------------------------
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> HPLIP-Help mailing list
> HPLIP-Help@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/hplip-help



-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
HPLIP-Help mailing list
HPLIP-Help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hplip-help

Reply via email to