On 19/12/06, Aaron <[EMAIL PROTECTED]> wrote: > Can you run hp-check and post the output?
I tried to, only to discover that the Ubuntu packages (helpfully) don't include it! So I installed HPLIP 1.6.10 from source as described at http://hplip.sourceforge.net/install/index.html. Printing continues to work just fine, but I'm still getting the same behaviour with regard to scanning: [EMAIL PROTECTED]:/home/will/Desktop/hplip-1.6.10# scanimage [sanei_debug] Setting debug level of dll to 0. [ 30 second or so wait here... ] scanimage: open of device hpaio:/usb/PSC_2200_Series?serial=MY283D26QH0G failed: Error during device I/O The output of hp-check, now that I have it, is as follows: [EMAIL PROTECTED]:/home/will/Desktop/hplip-1.6.10# hp-check HP Linux Imaging and Printing System (ver. 1.6.10) Dependency/Version Check Utility ver. 4.0 Copyright (c) 2003-6 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. --------------- | SYSTEM INFO | --------------- Basic system info (uname -a): --> Linux gateway 2.6.17-10-generic #2 SMP Tue Dec 5 22:28:26 UTC 2006 i686 GNU/Linux Detected distro (/etc/issue): --> ubuntu 6.1 Detected distro (lsb_release): --> Ubuntu 6.10 (edgy) Currently installed version... --> OK, HPLIP 1.6.10 currently installed in '/usr/share/hplip'. Current contents of '/etc/hp/hplip.conf' file: # hplip.conf [hpiod] # port=0 (dynamic IP port) port=2208 (IANA IP port) [hpssd] # port=0 (dynamic IP port) port=2207 (IANA IP port) [hplip] version=1.6.10 jdprobe=0 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/HP doc=/usr/share/doc/hplip-1.6.10 # Following values are determined at configure time and cannot be changed. [configure] network-build=1 pp-build=1 gui-build=1 scanner-build=1 fax-build=1 internal-tag=1.6.10.11 HPLIP running? \32515 ? Ss 0:00 /sbin/mount.smbfs //192.168.1.200/Shared /mnt/fsg -o rw username will password dmask 777 umask 777 fmask 777 \32515 ? Ss 0:00 /sbin/mount.smbfs //192.168.1.200/Shared /mnt/fsg -o rw username will password dmask 777 umask 777 fmask 777 --> Yes, HPLIP is running (OK). HPOJ running? -32515 ? Ss 0:00 /sbin/mount.smbfs //192.168.1.200/Shared /mnt/fsg -o rw username will password dmask 777 umask 777 fmask 777 --> No, HPOJ is not running (OK). Checking Python version... --> OK, version 2.4.4 installed ---------------- | DEPENDENCIES | ---------------- Checking for dependency 'libcrypto (libcrypto - OpenSSL cryptographic library)'... --> OK, found. Checking for dependency 'gcc (gcc - GNU Project C and C++ Compiler)'... --> OK, found. Checking for dependency 'sane (SANE - Scanning library)'... --> OK, found. Checking for dependency 'gs (GhostScript - PostScript and PDF language interpreter and previewer)'... --> OK, found. Checking for dependency 'libjpeg (libjpeg - JPEG library)'... --> OK, found. Checking for dependency 'libpthread (libpthread - POSIX threads library)'... --> OK, found. Checking for dependency 'make (make - GNU make utility to maintain groups of programs)'... --> OK, found. Checking for dependency 'python-devel (python-devel - Python development files)'... --> OK, found. Checking for dependency 'reportlab (Reportlab - PDF library for Python)'... error: Not found! This is an OPTIONAL dependency. Checking for dependency 'pyqt (PyQt - Qt interface for Python)'... --> OK, found. Checking for dependency 'cups-devel (cups-devel- Common Unix Printing System development files)'... --> OK, found. Checking for dependency 'ppdev (ppdev - Parallel port support kernel module.)'... error: Not found! error: This is a REQUIRED dependency. Checking for dependency 'libusb (libusb - USB library)'... --> OK, found. Checking for dependency 'scanimage (scanimage - Shell scanning program)'... --> OK, found. Checking for dependency 'libnetsnmp-devel (libnetsnmp-devel - SNMP networking library development files)'... --> OK, found. Checking for dependency 'python2x (Python 2.2 or greater - Python programming language)'... --> OK, found. Checking for dependency 'lsb (LSB - Linux Standard Base support)'... --> OK, found. Checking for dependency 'xsane (xsane - Graphical scanner frontend for SANE)'... --> OK, found. Checking for dependency 'cups (cups - Common Unix Printing System)'... --> OK, found. Checking for dependency 'python23 (Python 2.3 or greater - Required for fax functionality)'... --> OK, found. ---------------------- | INSTALLED PRINTERS | ---------------------- PSC_2200 -------- Device URI: hp:/usb/PSC_2200_Series?serial=MY283D26QH0G Installed in HPLIP? Yes PPD: /etc/cups/ppd/PSC_2200.ppd PPD Description: HP PSC 2210 Foomatic/hpijs (recommended) Printer status: printer PSC_2200 is idle. enabled since Tue 19 Dec 2006 10:36:33 AM GMT PSC_2200_fax ------------ Device URI: hpfax:/usb/PSC_2200_Series?serial=MY283D26QH0G Installed in HPLIP? Yes PPD: /etc/cups/ppd/PSC_2200_fax.ppd PPD Description: HP Fax Printer status: printer PSC_2200_fax is idle. enabled since Tue 19 Dec 2006 10:35:13 AM GMT ---------------------- | SANE CONFIGURATION | ---------------------- 'hpaio' in /etc/sane.d/dll.conf'... --> OK, found. SANE backend 'hpaio' is not properly set up. Checking output of 'scanimage -L'... [sanei_debug] Setting debug level of dll to 128. [dll] sane_init: SANE dll backend version 1.0.12 from sane-backends 1.0.18 [dll] sane_init/read_dlld: processing /etc/sane.d/dll.d ... [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip [dll] sane_init/read_config: reading dll.d/hplip [dll] add_backend: adding backend `hpaio' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/libsane-extras [dll] sane_init/read_config: reading dll.d/libsane-extras [dll] add_backend: adding backend `epkowa' [dll] add_backend: adding backend `geniusvp2' [dll] add_backend: adding backend `hp_rts88xx' [dll] sane_init/read_dlld: done. [dll] sane_init/read_config: reading dll.conf [dll] add_backend: adding backend `hpaio' [dll] add_backend: `hpaio' is already there [dll] sane_get_devices [dll] load: searching backend `hpaio' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hpaio.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hpaio.so.1' [dll] init: initializing backend `hpaio' [dll] init: backend `hpaio' is version 1.0.6 [dll] load: searching backend `hp_rts88xx' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp_rts88xx.so.1' [dll] load: couldn't open `/usr/lib/sane/libsane-hp_rts88xx.so.1' (No such file or directory) [dll] load: couldn't find backend `hp_rts88xx' (No such file or directory) [dll] load: searching backend `geniusvp2' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-geniusvp2.so.1' [dll] load: couldn't open `/usr/lib/sane/libsane-geniusvp2.so.1' (No such file or directory) [dll] load: couldn't find backend `geniusvp2' (No such file or directory) [dll] load: searching backend `epkowa' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-epkowa.so.1' [dll] load: couldn't open `/usr/lib/sane/libsane-epkowa.so.1' (No such file or directory) [dll] load: couldn't find backend `epkowa' (No such file or directory) [dll] sane_get_devices: found 2 devices [dll] sane_exit: exiting [dll] sane_exit: calling backend `hpaio's exit function [dll] sane_exit: finished device `hpaio:/usb/PSC_2200_Series?serial=MY283D26QH0G' is a hp PSC_2200_Series multi-function peripheral device `hpaio:/usb/PSC_2200_Series?serial=MY283D26QH0G' is a hp PSC_2200_Series multi-function peripheral --------------------- | PYTHON EXTENSIONS | --------------------- Checking 'cupsext' CUPS extension... --> OK, found. Checking 'pcardext' Photocard extension... --> OK, found. %d errors were detected. Please refer to the installation instructions at: http://hplip.sourceforge.net/install/index.html >From the above I can see that the hpaio backend is being reported as not set up correctly. Question is, what do I need to do to set it up? Googling has only pointed me in the direction of http://hplip.sourceforge.net/troubleshooting/scanning.html, which just tells me to make sure hpaio is present and uncommented in my dll.conf file (which it is). I'm fairly sure the ppdev error isn't relevant, as the device is USB-connected. I'm not sure why scanimage is now finding two devices, whereas with 1.6.9 it only found one. Unless one of them is the fax? Anyhow, here is /var/log/messages: [EMAIL PROTECTED]:/home/will/Desktop/hplip-1.6.10# tail /var/log/messages Dec 19 10:56:09 gateway hpiod: device cleanup uri=hp:/usb/PSC_2200_Series?serial=MY283D26QH0G Dec 19 10:56:09 gateway hpiod: device active clientcnt=1 channelcnt=0 uri=hp:/usb/PSC_2200_Series?serial=MY283D26QH0G Dec 19 10:56:55 gateway hpiod: device cleanup uri=hp:/usb/PSC_2200_Series?serial=MY283D26QH0G Dec 19 10:59:27 gateway hpiod: channel cleanup ci=1 Dec 19 10:59:27 gateway hpiod: channel cleanup ci=2 Dec 19 10:59:28 gateway hpiod: device cleanup uri=hp:/usb/PSC_2200_Series?serial=MY283D26QH0G Dec 19 10:59:28 gateway hpiod: device active clientcnt=1 channelcnt=0 uri=hp:/usb/PSC_2200_Series?serial=MY283D26QH0G Dec 19 11:00:14 gateway hpiod: device cleanup uri=hp:/usb/PSC_2200_Series?serial=MY283D26QH0G Dec 19 11:00:14 gateway hpiod: device active clientcnt=2 channelcnt=0 uri=hp:/usb/PSC_2200_Series?serial=MY283D26QH0G Dec 19 11:13:25 gateway hpiod: device cleanup uri=hp:/usb/PSC_2200_Series?serial=MY283D26QH0G Will ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ HPLIP-Help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/hplip-help
