Can you run:
/etc/init.d/hplip restart
and
/etc/init.d/cupsys restart
and finally
hp-setup -g
and post the hp-setup -g log.
A
On 2/27/07, Splodgeness Tiberious Abounds <[EMAIL PROTECTED]>
wrote:
I could not get the installation to work (sh hplip-1.7.1.run), it just
hung forever or until I logged out whilst attempting the following:
'su -c "apt-get install --force-yes --yes libjpeg62-dev python-dev
libcupsys2-dev libusb-dev lsb libsnmp5-dev python-reportlab sane"'
Finally I used aptitude to install these dependencies myself and then ran:
sh hplip-1.7.1.run and get the following:
Creating directory hplip-1.7.1
Verifying archive integrity... All good.
Uncompressing HPLIP 1.7.1 Self Extracting
Archive.....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
..
........
...................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
HP Linux Imaging and Printing System (ver. 1.7.1)
HPLIP Installer ver. 1.0
Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Initializing...
note: Defaults for each question are maked with a '*'. Press <enter> to
accept the default.
INSTALLATION MODE
-----------------
Please choose the installation mode (a=automatic*, c=custom, q=quit) : a
This installer will install HPLIP version 1.7.1 on your computer.
Distro is Debian 3.1
DISTRO/OS SELECTION
-------------------
Is "Debian 3.1" your correct distro/OS and version (y=yes*, n=no, q=quit)
? y
INSTALL MISSING OPTIONAL DEPENDENCIES
-------------------------------------
note: Installation of dependencies requires an active internet connection.
warning: Missing OPTIONAL dependency for option 'Scanning': xsane (xsane -
Graphical scanner frontend for SANE)
----------
Running 'su -c "dpkg --configure -a"'
Please wait, this may take several minutes...
Running 'su -c "apt-get install -f"'
Please wait, this may take several minutes...
Running 'su -c "apt-get update"'
Please wait, this may take several minutes...
DEPENDENCY AND CONFLICT RESOLUTION
----------------------------------
Running 'su -c "apt-get install --force-yes --yes sane"'
Please wait, this may take several minutes...
warning: A previous install of HPLIP is installed and/or running.
Running '/etc/init.d/hplip stop'
Please wait, this may take several minutes...
Running 'su -c "apt-get remove --force-yes --yes hplip hpijs"'
Please wait, this may take several minutes...
error: HPLIP removal failed. The previous install may have been installed
using a tarball or this installer.
error: Continuing to run installer - this installation should overwrite
the previous one.
warning: An optional dependency 'xsane' is still missing.
warning: Some features may not function as expected.
BUILD AND INSTALL
-----------------
Running './configure --enable-network-build --disable-pp-build
--enable-fax-build --enable-gui-build --enable-scan-build --prefix=/usr'
Please wait, this may take several minutes...
Command completed successfully.
Running 'make clean'
Please wait, this may take several minutes...
Command completed successfully.
Running 'make'
Please wait, this may take several minutes...
Command completed successfully.
Running 'make install'
Please wait, this may take several minutes...
Command completed successfully.
Running '/etc/init.d/hplip restart'
Please wait, this may take several minutes...
Command completed successfully.
Running '/etc/init.d/cupsys restart'
Please wait, this may take several minutes...
Command completed successfully.
Please make sure your printer is connected and powered on at this time.
error: This program may not function properly with the version of PyQt
that is installed (3.13.0).
error: Incorrect version of pyQt installed. Ver. 3.14 or greater required.
error: This program will continue, but you may experience errors, crashes
or other problems.
HP Linux Imaging and Printing System (ver. 1.7.1)
Printer/Fax Setup Utility ver. 4.3
Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: This program may not function properly with the version of PyQt
that is installed (3.13.0).
error: Incorrect version of pyQt installed. Ver. 3.14 or greater required.
error: This program will continue, but you may experience errors, crashes
or other problems.
Session management error: Authentication Rejected, reason : None of the
authentication protocols specified are supported and host-based
authentication failed
error: Printer queue setup failed.Please restart CUPS and try again.
lpr: Photosmart_2570: unknown printer
error: Print command failed with exit code 256!
Done.
I feel like I am getting close but still no banana!
I have an excellent internet connection although I think aptitude is setup
to only use CD currently after my installation (not sure, just a guess.)
When it says 'Please restart CUPS and try again.' I will look on the
internet at how to restart CUPS but by start again does it mean go through
the whole 'sh hplip-1.7.1.run' process again?
thanks in advance.
Paddi Stowe
p.s.
I was attempting to install on a Demudi system about 6 weeks ago and got
some help from Aaron at hplip but I gave up with Demudi as it seems to be
an unsupported distro now and has sooooo many dependency issues on so many
different areas.
--
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
HPLIP-Help mailing list
HPLIP-Help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hplip-help
--
I don't care, I'm still free. You can't take the sky from me. - "Firefly"
-
Ubuntu User: #11105
Ubuntu Linux http://ubuntulinux.org
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
HPLIP-Help mailing list
HPLIP-Help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hplip-help
