I am running cups v1.1.23
----- Original Message -----
From: Aaron
To: Splodgeness Tiberious Abounds
Cc: hplip-help@lists.sourceforge.net
Sent: Wednesday, February 28, 2007 5:34 PM
Subject: Re: [Hplip-help] Hi - I'm using a newly built Debian installation
3.1r5 kernel 2.6
If you go to
http://localhost:631
what version of cups are you using?
A
On 2/27/07, Splodgeness Tiberious Abounds <[EMAIL PROTECTED]> wrote:
Hi,
I have run those commands but it asked for a location which i left blank.
I could not find a log file - only 2 log files in the directory - 1
(config.log) from 2007-02-27 15:59 and the other (install.log) from
2007-02-27 16:08. I ran the command at about 21:25 but no files appear
with that timestamp. Both previously mentioned files attached anyway and
output from commands pasted below:
Pad1:/home/maybi7/Downloads/2007/02/hplip- 1.7.1# /etc/init.d/hplip restart
Stopping hpiod: [ OK ]
Stopping hpssd: [ OK ]
Starting hpiod: [ OK ]
Starting hpssd: [ OK ]
Pad1:/home/maybi7/Downloads/2007/02/hplip-1.7.1# /etc/init.d/cupsys restart
Restarting Common Unix Printing System: cupsd.
Pad1:/home/maybi7/Downloads/2007/02/hplip- 1.7.1# hp-setup -g
HP Linux Imaging and Printing System (ver. 1.7.1)
Printer/Fax Setup Utility ver. 4.3
Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: PyQt not installed. GUI not available. Exiting.
error: PyQt init failed. Reverting to interactive mode.
hp-setup[14081]: debug: (xmit) Sending data on channel (6)
hp-setup[14081]: debug: 'msg=probedevices\nbus=usb\n'
hp-setup[14081]: debug: (xmit) Reading data on channel (6)
hp-setup[14081]: debug:
'msg=ProbeDevicesResult\nresult-code=0\nnum-devices=1\nlength=235\ndata:\ndirect
hp:/usb/Photosmart_2570_series?serial=MY69G2104B04DY "HP Photosmart 2570
series" "HP Photosmart 2570 series USB MY69G2104B04DY HPLIP"
"MFG:HP;MDL:Photosmart 2570 series;CLS:PRINTER;DES:Photosmart 2570
series;SN:MY69G2104B04DY;"\n'
hp-setup[14081]: debug:
hp:/usb/Photosmart_2570_series?serial=MY69G2104B04DY
hp-setup[14081]: debug: Cache miss: photosmart_2570_series
hp-setup[14081]: debug: Reading file:
/usr/share/hplip/data/models/models.dat
hp-setup[14081]: debug: Searching for section [photosmart_2570_series] in
file /usr/share/hplip/data/models/models.dat
hp-setup[14081]: debug: Found section [photosmart_2570_series] in file
/usr/share/hplip/data/models/models.dathp-setup[14081]: debug: (xmit)
Sending data on channel (6)
hp-setup[14081]: debug: 'msg=probedevices\nbus=par\n'
hp-setup[14081]: debug: (xmit) Reading data on channel (6)
hp-setup[14081]: debug:
'msg=ProbeDevicesResult\nresult-code=0\nnum-devices=0\nlength=0\ndata:\n'
hp-setup[14081]: debug:
{'hp:/usb/Photosmart_2570_series?serial=MY69G2104B04DY': ('HP Photosmart
2570 series', 'HP Photosmart 2570 series USB MY69G2104B04DY HPLIP',
'MFG:HP;MDL:Photosmart 2570 series;CLS:PRINTER;DES:Photosmart 2570
series;SN:MY69G2104B04DY;')}
hp-setup[14081]: debug: [< cupsext.Printer object at 0x406fe4f8>]
Using device: hp:/usb/Photosmart_2570_series?serial=MY69G2104B04DY
Setting up device: hp:/usb/Photosmart_2570_series?serial=MY69G2104B04DY
(Note: Defaults for each question are maked with a '*'. Press <enter> to
accept the default.)
hp-setup[14081]: debug: Model=Photosmart_2570_series
warning: Cannot setup fax - device does not have fax feature.
hp-setup[14081]: debug: Searching for PPDs in: /usr/share/ppd/HP
hp-setup[14081]: debug: Exception: 4 (Unknown/invalid device-uri field)
hp-setup[14081]: debug: {}
PRINT QUEUE SETUP
Please enter a name for this print queue (m=use model
name:'Photosmart_2570'*, q=quit) ?m
Using queue name: Photosmart_2570
hp-setup[14081]: debug: 1st stage edit distance match
hp-setup[14081]: debug: Min. dist = 0
hp-setup[14081]: debug:
['/usr/share/ppd/HP/HP-PhotoSmart_2570-hpijs.ppd.gz ']
Found a possible PPD file:
/usr/share/ppd/HP/HP-PhotoSmart_2570-hpijs.ppd.gz
Note: The model number may vary slightly from the actual model number on
the device.
Does this PPD file appear to be the correct one (y=yes*, n=no, q=quit) ?y
Enter a location description for this printer (q=quit) ?
Enter additonal information or notes for this printer (q=quit) ?
Adding print queue to CUPS:
Device URI: hp:/usb/Photosmart_2570_series?serial=MY69G2104B04DY
Queue name: Photosmart_2570
PPD file: /usr/share/ppd/HP/HP-PhotoSmart_2570-hpijs.ppd.gz
Location:
Information:
hp-setup[14081]: debug: Restarting CUPS...
hp-setup[14081]: debug: Restarting Common Unix Printing System: cupsd.
hp-setup[14081]: debug: Restart CUPS returned: exit=0 output=Restarting
Common Unix Printing System: cupsd.
hp-setup[14081]: debug: {}
error: Printer queue setup failed. Please restart CUPS and try again.
Pad1:/home/maybi7/Downloads/2007/02/hplip-1.7.1#
#######################################################################################
On Tue, 27 Feb 2007 16:11:35 -0000, Aaron <[EMAIL PROTECTED]> wrote:
> Can you run:
>
> /etc/init.d/hplip restart
> and
> /etc/init.d/cupsys restart
> and finally
> hp-setup -g
> and post the hp-setup -g log.
>
> A
>
> On 2/27/07, Splodgeness Tiberious Abounds < [EMAIL PROTECTED]>
> wrote:
>>
>> I could not get the installation to work (sh hplip-1.7.1.run), it just
>> hung forever or until I logged out whilst attempting the following:
>>
>> 'su -c "apt-get install --force-yes --yes libjpeg62-dev python-dev
>> libcupsys2-dev libusb-dev lsb libsnmp5-dev python-reportlab sane"'
>>
>> Finally I used aptitude to install these dependencies myself and then
>> ran:
>> sh hplip-1.7.1.run and get the following:
>>
>>
>> Creating directory hplip-1.7.1
>> Verifying archive integrity... All good.
>> Uncompressing HPLIP 1.7.1 Self Extracting
>>
>>
Archive.......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
>> ........
>>
>>
...................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
>>
>> HP Linux Imaging and Printing System (ver. 1.7.1)
>> HPLIP Installer ver. 1.0
>>
>> Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
>> This software comes with ABSOLUTELY NO WARRANTY.
>> This is free software, and you are welcome to distribute it
>> under certain conditions. See COPYING file for more details.
>>
>> Initializing...
>>
>> note: Defaults for each question are maked with a '*'. Press <enter> to
>> accept the default.
>>
>>
>> INSTALLATION MODE
>> -----------------
>> Please choose the installation mode (a=automatic*, c=custom, q=quit) : a
>>
>> This installer will install HPLIP version 1.7.1 on your computer.
>> Distro is Debian 3.1
>>
>>
>> DISTRO/OS SELECTION
>> -------------------
>>
>> Is "Debian 3.1" your correct distro/OS and version (y=yes*, n=no,
>> q=quit)
>> ? y
>>
>> INSTALL MISSING OPTIONAL DEPENDENCIES
>> -------------------------------------
>>
>> note: Installation of dependencies requires an active internet
>> connection.
>> warning: Missing OPTIONAL dependency for option 'Scanning': xsane
>> (xsane -
>> Graphical scanner frontend for SANE)
>> ----------
>>
>> Running 'su -c "dpkg --configure -a"'
>> Please wait, this may take several minutes...
>> Running 'su -c "apt-get install -f"'
>> Please wait, this may take several minutes...
>> Running 'su -c "apt-get update"'
>> Please wait, this may take several minutes...
>>
>>
>> DEPENDENCY AND CONFLICT RESOLUTION
>> ----------------------------------
>> Running 'su -c "apt-get install --force-yes --yes sane"'
>> Please wait, this may take several minutes...
>> warning: A previous install of HPLIP is installed and/or running.
>> Running '/etc/init.d/hplip stop'
>> Please wait, this may take several minutes...
>>
>> Running 'su -c "apt-get remove --force-yes --yes hplip hpijs"'
>> Please wait, this may take several minutes...
>> error: HPLIP removal failed. The previous install may have been
>> installed
>> using a tarball or this installer.
>> error: Continuing to run installer - this installation should overwrite
>> the previous one.
>> warning: An optional dependency 'xsane' is still missing.
>> warning: Some features may not function as expected.
>>
>>
>> BUILD AND INSTALL
>> -----------------
>>
>> Running './configure --enable-network-build --disable-pp-build
>> --enable-fax-build --enable-gui-build --enable-scan-build --prefix=/usr'
>> Please wait, this may take several minutes...
>>
>> Command completed successfully.
>>
>> Running 'make clean'
>> Please wait, this may take several minutes...
>>
>> Command completed successfully.
>>
>> Running 'make'
>> Please wait, this may take several minutes...
>>
>> Command completed successfully.
>>
>> Running 'make install'
>> Please wait, this may take several minutes...
>>
>> Command completed successfully.
>>
>> Running '/etc/init.d/hplip restart'
>> Please wait, this may take several minutes...
>>
>> Command completed successfully.
>>
>> Running '/etc/init.d/cupsys restart'
>> Please wait, this may take several minutes...
>>
>> Command completed successfully.
>> Please make sure your printer is connected and powered on at this time.
>> error: This program may not function properly with the version of PyQt
>> that is installed (3.13.0).
>> error: Incorrect version of pyQt installed. Ver. 3.14 or greater
>> required.
>> error: This program will continue, but you may experience errors,
>> crashes
>> or other problems.
>>
>> HP Linux Imaging and Printing System (ver. 1.7.1)
>> Printer/Fax Setup Utility ver. 4.3
>>
>> Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
>> This software comes with ABSOLUTELY NO WARRANTY.
>> This is free software, and you are welcome to distribute it
>> under certain conditions. See COPYING file for more details.
>>
>> error: This program may not function properly with the version of PyQt
>> that is installed (3.13.0).
>> error: Incorrect version of pyQt installed. Ver. 3.14 or greater
>> required.
>> error: This program will continue, but you may experience errors,
>> crashes
>> or other problems.
>> Session management error: Authentication Rejected, reason : None of the
>> authentication protocols specified are supported and host-based
>> authentication failed
>> error: Printer queue setup failed.Please restart CUPS and try again.
>> lpr: Photosmart_2570: unknown printer
>> error: Print command failed with exit code 256!
>> Done.
>>
>> I feel like I am getting close but still no banana!
>> I have an excellent internet connection although I think aptitude is
>> setup
>> to only use CD currently after my installation (not sure, just a guess.)
>> When it says 'Please restart CUPS and try again.' I will look on the
>> internet at how to restart CUPS but by start again does it mean go
>> through
>> the whole 'sh hplip-1.7.1.run ' process again?
>>
>> thanks in advance.
>>
>> Paddi Stowe
>>
>> p.s.
>> I was attempting to install on a Demudi system about 6 weeks ago and got
>> some help from Aaron at hplip but I gave up with Demudi as it seems to
>> be
>> an unsupported distro now and has sooooo many dependency issues on so
>> many
>> different areas.
>>
>> --
>> Using Opera's revolutionary e-mail client: http://www.opera.com/mail/
>>
>> -------------------------------------------------------------------------
>> Take Surveys. Earn Cash. Influence the Future of IT
>> Join SourceForge.net's Techsay panel and you'll get the chance to share
>> your
>> opinions on IT & business topics through brief surveys-and earn cash
>> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>> _______________________________________________
>> HPLIP-Help mailing list
>> HPLIP-Help@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/hplip-help
>>
>
>
>
--
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/
--
I don't care, I'm still free. You can't take the sky from me. - "Firefly"
-
Ubuntu User: #11105
Ubuntu Linux http://ubuntulinux.org -------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
HPLIP-Help mailing list
HPLIP-Help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hplip-help
