I removed and reinstalled a few CUPS packages, nothing changed. I didn't forget to restart CUPS. But, due to the dependencies behaviour, it's difficult to remove some packages without removing a lot of stuff (I have mandriva).
CUPS, as far as I understand it, is up and running, because I can connect to "http://localhost:631"; and do a lot of things except printing. The issue is maybe is with the foomatic stuff. When I print a test page, I have an error message : "/usr/lib/cups/filter/foomatic-rip failed". This is chinese for me. A file with path /usr/lib/cups/filter/foomatic-rip exists; what it is supposed to do I don't know. My system is a fresh installation of mandriva 2007.1. I had no problem during install, but I was never able to print since that. There is no bug report on mandriva's database regarding hp printing problems, and I know my printer is fully supported by hplip driver. Thanks a lot for your patience. Antonio Aaron a écrit : > Looks like there is a problem with your cups installation. If > possible try removing and reinstalling CUPS. > > Hope this helps. > > A > > On 6/16/07, *apessoa * <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>> wrote: > > Here it is : > > ============================ > $ hp-check > > HP Linux Imaging and Printing System (ver. 1.6.12) > Dependency/Version Check Utility ver. 5.2 > > Copyright (c) 2003-6 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > > --------------- > | SYSTEM INFO | > --------------- > > Basic system information: > Linux localhost 2.6.17-14mdv #1 SMP Wed May 9 21:11:43 MDT 2007 > i686 AMD > Athlon(tm) XP 3000+ GNU/Linux > > Detected distro (/etc/issue): > mandriva 2007.1 > > Detected distro (lsb_release): > MandrivaLinux 2007.1 (Official) > > Currently installed HPLIP version... > HPLIP 1.6.12 currently installed in '/usr/share/hplip'. > > Current contents of '/etc/hp/hplip.conf' file: > # hplip.conf > > [hpiod] > # port=0 (dynamic IP port) > port=2208 > [hpssd] > # port=0 (dynamic IP port) > port=2207 > > [hplip] > version=1.6.12 > jdprobe=0 > > [dirs] > home=/usr/share/hplip > run=/var/run > ppd=/usr/share/ppd/HP > doc=/usr/share/doc/hplip-1.6.12 > > # Following values are determined at configure time and cannot be > changed. > [configure] > network-build=1 > pp-build=1 > gui-build=1 > scanner-build=1 > fax-build=1 > installinitd= > chkconfig=/sbin/chkconfig > internal-tag=1.6.12.15 <http://1.6.12.15> > > > HPLIP running? > Yes, HPLIP is running (OK). > > HPOJ running? > No, HPOJ is not running (OK). > > Checking Python version... > OK, version 2.5.0 installed > > Checking PyQt version... > OK, version 3.14 installed. > > Checking SIP version... > OK, Version 4.2.1 installed > > ---------------- > | DEPENDENCIES | > ---------------- > > > Checking for dependency libcrypto - OpenSSL cryptographic library... > OK, found. > > Checking for dependency gcc - GNU Project C and C++ Compiler... > OK, found. > > Checking for dependency SANE - Scanning library... > OK, found. > > Checking for dependency GhostScript - PostScript and PDF language > interpreter and previewer... > OK, found. > > Checking for dependency libjpeg - JPEG library... > OK, found. > > Checking for dependency libpthread - POSIX threads library... > OK, found. > > Checking for dependency make - GNU make utility to maintain groups of > programs... > OK, found. > > Checking for dependency python-devel - Python development files... > OK, found. > > Checking for dependency Reportlab - PDF library for Python... > OK, found. > > Checking for dependency PyQt - Qt interface for Python... > OK, found. > > Checking for dependency cups-devel- Common Unix Printing System > development files... > OK, found. > > Checking for dependency ppdev - Parallel port support kernel > module.... > OK, found. > > Checking for dependency libusb - USB library... > OK, found. > > Checking for dependency scanimage - Shell scanning program... > OK, found. > > Checking for dependency libnetsnmp-devel - SNMP networking library > development files... > OK, found. > > Checking for dependency Python 2.2 or greater - Python programming > language... > OK, found. > > Checking for dependency LSB - Linux Standard Base support... > OK, found. > > Checking for dependency xsane - Graphical scanner frontend for SANE... > OK, found. > > Checking for dependency cups - Common Unix Printing System... > error: Not found! > error: This is a REQUIRED dependency. Please make sure that this > dependency is installed before installing or running HPLIP. > > Checking for dependency Python 2.3 or greater - Required for fax > functionality... > OK, found. > > > ---------------------- > | INSTALLED PRINTERS | > ---------------------- > > > warning: No queues found. > > ---------------------- > | SANE CONFIGURATION | > ---------------------- > > 'hpaio' in /etc/sane.d/dll.conf'... > OK, found. SANE backend 'hpaio' is properly set up. > > Checking output of 'scanimage -L'... > > No scanners were identified. If you were expecting something > different, > check that the scanner is plugged in, turned on and detected by the > sane-find-scanner tool (if appropriate). Please read the > documentation > which came with this software (README, FAQ, manpages). > > > --------------------- > | PYTHON EXTENSIONS | > --------------------- > > Checking 'cupsext' CUPS extension... > OK, found. > > Checking 'pcardext' Photocard extension... > OK, found. > > > 1 errors were detected. > Please refer to the installation instructions at: > http://hplip.sourceforge.net/install/index.html > ============================ > > I don't what to do with the error, because it seems to me that cups is > installed : > > $ rpm -qa|grep cups > cups-common-1.2.10-2mdv2007.1 > libgnomecups-0.2.2-3mdv2007.0 > libcups2-devel-1.2.10-2mdv2007.1 > cups-drivers-2007-8mdv2007.1 > libcups2-1.2.10-2mdv2007.1 > cups-1.2.10-2mdv2007.1 > cupsddk-drivers-1.1-0.270.3mdv2007.0 > libgnomecups-1.0_1-0.2.2-3mdv2007.0 > gutenprint-cups-5.0.0-3mdv2007.1 > > Thanks a lot > Antonio > > Aaron a écrit : > > Can you run hp-check and post the output? > > > > Thanks! > > > > A > > > > On 6/12/07, *apessoa* <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]> > > <mailto:[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>>> wrote: > > > > Hello, > > I have an HP 970cxi. > > I'm using Mandriva linux 2007.1, with hplip and CUPS. > > > > My printer (attached to usb) doesn't print since I installed > the new > > mandriva 2007.1. > > > > Hp-tool says the printer is idle and ready, but even > printing a test > > page on cups or hptool doesn't work. > > > > cups is running, hplip is running too. > > > > The rpms I've are : > > $ rpm -qa|grep hp > > foomatic-db-hpijs-2.6.7-1.20060828.1mdv2007.0 > > hplip-1.6.12-2mdv2007.1 > > hplip-hpijs-ppds-1.6.12-2mdv2007.1 > > hplip-model-data-1.6.12-2mdv2007.1 > > hplip-hpijs-1.6.12-2mdv2007.1 > > libhpip0-1.6.12-2mdv2007.1 > > > > All of them are ok. I tried removing them and reinstall, no > success. > > > > When I try to print a test page with cups, I have the message : > > /usr/lib/cups/filter/foomatic-rip failed > > > > The CUPS printer description is : > > Description : HP DESKJET 970C > > Brand and model : HP DeskJet 970C Foomatic/hpijs (recommended) > > Status : ne fait rien (idle), accepte les tâches (accepting), > > publique . > > URI : hp:/usb/DeskJet_970C?serial=ES9AS131RRJQ > > > > I tried to get help from the Mandriva community, without > success. > > > > Thanks a lot for some help, because I tried everything I > know and I'm > > completely stucked !! > > > > > > -- > > Si le travail c'est la santé, vive la maladie. > > Dicton populaire. > > > > > > > > > > > ------------------------------------------------------------------------- > > > This SF.net email is sponsored by DB2 Express > > Download DB2 Express C - the FREE version of DB2 express and > take > > control of your XML. No limits. Just data. Click to get it now. > > http://sourceforge.net/powerbar/db2/ > > _______________________________________________ > > HPLIP-Help mailing list > > HPLIP-Help@lists.sourceforge.net > <mailto:HPLIP-Help@lists.sourceforge.net> > > <mailto:HPLIP-Help@lists.sourceforge.net > <mailto:HPLIP-Help@lists.sourceforge.net>> > > https://lists.sourceforge.net/lists/listinfo/hplip-help > > > > > > > > > > -- > > I don't care, I'm still free. You can't take the sky from me. - > Firefly > > "Reality is merely an illusion, albeit a very persistent one." - > Einstein > > > -- > L'enfer existe. Il est la part du plus grand nombre. > Guillaume Apollinaris de Kostrowitzky > > > > > -- > I don't care, I'm still free. You can't take the sky from me. - Firefly > "Reality is merely an illusion, albeit a very persistent one." - Einstein -- Les femmes, de par leur conformation, sont généralement étroites et profondes au propre comme au figuré. Maurice Sachs ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ HPLIP-Help mailing list HPLIP-Help@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hplip-help
