Please install a printer using su -c "hp-setup", then follow the
instructions for Issue 2 on this page:
http://hplip.sourceforge.net/troubleshooting/printing.html
Post any output to this mailing list for additional support.
-Don
On 6/19/07, apessoa <[EMAIL PROTECTED]> wrote:
I removed and reinstalled a few CUPS packages, nothing changed. I didn't
forget to restart CUPS.
But, due to the dependencies behaviour, it's difficult to remove some
packages without removing a lot of stuff (I have mandriva).
CUPS, as far as I understand it, is up and running, because I can
connect to "http://localhost:631"; and do a lot of things except printing.
The issue is maybe is with the foomatic stuff. When I print a test page,
I have an error message : "/usr/lib/cups/filter/foomatic-rip failed".
This is chinese for me.
A file with path /usr/lib/cups/filter/foomatic-rip exists; what it is
supposed to do I don't know.
My system is a fresh installation of mandriva 2007.1. I had no problem
during install, but I was never able to print since that.
There is no bug report on mandriva's database regarding hp printing
problems, and I know my printer is fully supported by hplip driver.
Thanks a lot for your patience.
Antonio
Aaron a écrit :
> Looks like there is a problem with your cups installation. If
> possible try removing and reinstalling CUPS.
>
> Hope this helps.
>
> A
>
> On 6/16/07, *apessoa * <[EMAIL PROTECTED]
> <mailto:[EMAIL PROTECTED]>> wrote:
>
> Here it is :
>
> ============================
> $ hp-check
>
> HP Linux Imaging and Printing System (ver. 1.6.12)
> Dependency/Version Check Utility ver. 5.2
>
> Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
> This software comes with ABSOLUTELY NO WARRANTY.
> This is free software, and you are welcome to distribute it
> under certain conditions. See COPYING file for more details.
>
>
> ---------------
> | SYSTEM INFO |
> ---------------
>
> Basic system information:
> Linux localhost 2.6.17-14mdv #1 SMP Wed May 9 21:11:43 MDT 2007
> i686 AMD
> Athlon(tm) XP 3000+ GNU/Linux
>
> Detected distro (/etc/issue):
> mandriva 2007.1
>
> Detected distro (lsb_release):
> MandrivaLinux 2007.1 (Official)
>
> Currently installed HPLIP version...
> HPLIP 1.6.12 currently installed in '/usr/share/hplip'.
>
> Current contents of '/etc/hp/hplip.conf' file:
> # hplip.conf
>
> [hpiod]
> # port=0 (dynamic IP port)
> port=2208
> [hpssd]
> # port=0 (dynamic IP port)
> port=2207
>
> [hplip]
> version=1.6.12
> jdprobe=0
>
> [dirs]
> home=/usr/share/hplip
> run=/var/run
> ppd=/usr/share/ppd/HP
> doc=/usr/share/doc/hplip-1.6.12
>
> # Following values are determined at configure time and cannot be
> changed.
> [configure]
> network-build=1
> pp-build=1
> gui-build=1
> scanner-build=1
> fax-build=1
> installinitd=
> chkconfig=/sbin/chkconfig
> internal-tag=1.6.12.15 <http://1.6.12.15>
>
>
> HPLIP running?
> Yes, HPLIP is running (OK).
>
> HPOJ running?
> No, HPOJ is not running (OK).
>
> Checking Python version...
> OK, version 2.5.0 installed
>
> Checking PyQt version...
> OK, version 3.14 installed.
>
> Checking SIP version...
> OK, Version 4.2.1 installed
>
> ----------------
> | DEPENDENCIES |
> ----------------
>
>
> Checking for dependency libcrypto - OpenSSL cryptographic library...
> OK, found.
>
> Checking for dependency gcc - GNU Project C and C++ Compiler...
> OK, found.
>
> Checking for dependency SANE - Scanning library...
> OK, found.
>
> Checking for dependency GhostScript - PostScript and PDF language
> interpreter and previewer...
> OK, found.
>
> Checking for dependency libjpeg - JPEG library...
> OK, found.
>
> Checking for dependency libpthread - POSIX threads library...
> OK, found.
>
> Checking for dependency make - GNU make utility to maintain groups
of
> programs...
> OK, found.
>
> Checking for dependency python-devel - Python development files...
> OK, found.
>
> Checking for dependency Reportlab - PDF library for Python...
> OK, found.
>
> Checking for dependency PyQt - Qt interface for Python...
> OK, found.
>
> Checking for dependency cups-devel- Common Unix Printing System
> development files...
> OK, found.
>
> Checking for dependency ppdev - Parallel port support kernel
> module....
> OK, found.
>
> Checking for dependency libusb - USB library...
> OK, found.
>
> Checking for dependency scanimage - Shell scanning program...
> OK, found.
>
> Checking for dependency libnetsnmp-devel - SNMP networking library
> development files...
> OK, found.
>
> Checking for dependency Python 2.2 or greater - Python programming
> language...
> OK, found.
>
> Checking for dependency LSB - Linux Standard Base support...
> OK, found.
>
> Checking for dependency xsane - Graphical scanner frontend for
SANE...
> OK, found.
>
> Checking for dependency cups - Common Unix Printing System...
> error: Not found!
> error: This is a REQUIRED dependency. Please make sure that this
> dependency is installed before installing or running HPLIP.
>
> Checking for dependency Python 2.3 or greater - Required for fax
> functionality...
> OK, found.
>
>
> ----------------------
> | INSTALLED PRINTERS |
> ----------------------
>
>
> warning: No queues found.
>
> ----------------------
> | SANE CONFIGURATION |
> ----------------------
>
> 'hpaio' in /etc/sane.d/dll.conf'...
> OK, found. SANE backend 'hpaio' is properly set up.
>
> Checking output of 'scanimage -L'...
>
> No scanners were identified. If you were expecting something
> different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the
> documentation
> which came with this software (README, FAQ, manpages).
>
>
> ---------------------
> | PYTHON EXTENSIONS |
> ---------------------
>
> Checking 'cupsext' CUPS extension...
> OK, found.
>
> Checking 'pcardext' Photocard extension...
> OK, found.
>
>
> 1 errors were detected.
> Please refer to the installation instructions at:
> http://hplip.sourceforge.net/install/index.html
> ============================
>
> I don't what to do with the error, because it seems to me that cups
is
> installed :
>
> $ rpm -qa|grep cups
> cups-common-1.2.10-2mdv2007.1
> libgnomecups-0.2.2-3mdv2007.0
> libcups2-devel-1.2.10-2mdv2007.1
> cups-drivers-2007-8mdv2007.1
> libcups2-1.2.10-2mdv2007.1
> cups-1.2.10-2mdv2007.1
> cupsddk-drivers-1.1-0.270.3mdv2007.0
> libgnomecups-1.0_1-0.2.2-3mdv2007.0
> gutenprint-cups-5.0.0-3mdv2007.1
>
> Thanks a lot
> Antonio
>
> Aaron a écrit :
> > Can you run hp-check and post the output?
> >
> > Thanks!
> >
> > A
> >
> > On 6/12/07, *apessoa* <[EMAIL PROTECTED]
> <mailto:[EMAIL PROTECTED]>
> > <mailto:[EMAIL PROTECTED]
> <mailto:[EMAIL PROTECTED]>>> wrote:
> >
> > Hello,
> > I have an HP 970cxi.
> > I'm using Mandriva linux 2007.1, with hplip and CUPS.
> >
> > My printer (attached to usb) doesn't print since I installed
> the new
> > mandriva 2007.1.
> >
> > Hp-tool says the printer is idle and ready, but even
> printing a test
> > page on cups or hptool doesn't work.
> >
> > cups is running, hplip is running too.
> >
> > The rpms I've are :
> > $ rpm -qa|grep hp
> > foomatic-db-hpijs-2.6.7-1.20060828.1mdv2007.0
> > hplip-1.6.12-2mdv2007.1
> > hplip-hpijs-ppds-1.6.12-2mdv2007.1
> > hplip-model-data-1.6.12-2mdv2007.1
> > hplip-hpijs-1.6.12-2mdv2007.1
> > libhpip0-1.6.12-2mdv2007.1
> >
> > All of them are ok. I tried removing them and reinstall, no
> success.
> >
> > When I try to print a test page with cups, I have the message
:
> > /usr/lib/cups/filter/foomatic-rip failed
> >
> > The CUPS printer description is :
> > Description : HP DESKJET 970C
> > Brand and model : HP DeskJet 970C Foomatic/hpijs (recommended)
> > Status : ne fait rien (idle), accepte les tâches (accepting),
> > publique .
> > URI : hp:/usb/DeskJet_970C?serial=ES9AS131RRJQ
> >
> > I tried to get help from the Mandriva community, without
> success.
> >
> > Thanks a lot for some help, because I tried everything I
> know and I'm
> > completely stucked !!
> >
> >
> > --
> > Si le travail c'est la santé, vive la maladie.
> > Dicton populaire.
> >
> >
> >
> >
> >
>
-------------------------------------------------------------------------
>
> > This SF.net email is sponsored by DB2 Express
> > Download DB2 Express C - the FREE version of DB2 express and
> take
> > control of your XML. No limits. Just data. Click to get it
now.
> > http://sourceforge.net/powerbar/db2/
> > _______________________________________________
> > HPLIP-Help mailing list
> > HPLIP-Help@lists.sourceforge.net
> <mailto:HPLIP-Help@lists.sourceforge.net>
> > <mailto:HPLIP-Help@lists.sourceforge.net
> <mailto:HPLIP-Help@lists.sourceforge.net>>
> > https://lists.sourceforge.net/lists/listinfo/hplip-help
> >
> >
> >
> >
> > --
> > I don't care, I'm still free. You can't take the sky from me. -
> Firefly
> > "Reality is merely an illusion, albeit a very persistent one." -
> Einstein
>
>
> --
> L'enfer existe. Il est la part du plus grand nombre.
> Guillaume Apollinaris de Kostrowitzky
>
>
>
>
> --
> I don't care, I'm still free. You can't take the sky from me. - Firefly
> "Reality is merely an illusion, albeit a very persistent one." -
Einstein
--
Les femmes, de par leur conformation, sont généralement étroites
et profondes au propre comme au figuré. Maurice Sachs
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
HPLIP-Help mailing list
HPLIP-Help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hplip-help
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
HPLIP-Help mailing list
HPLIP-Help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hplip-help
