Only time I've shot panoramas of tall vertical items, I think I set
vertical lines on the vertical edges. Been a long time. But I generally
like to have a lot of control points, just always running clean control
points after my first pass at aligning images.
Thanks for the link to the pictures, looks like a pretty cool thing they
did.
On 4/25/19 12:24 PM, Kameldýrið wrote:
Also, what about control points on somewhat tall houses, since they have
varying angles, should i not have control poins in houses?
On Thursday, 25 April 2019 21:07:33 UTC, Kameldýrið wrote:
Haha, nice to hear your experience.
Those pictures aren't actually mine: they were taken by the National
Survey in 1986 on film, and digitized later. They have accumulated a
large collection of images through the years and have digitized
images back to 1977. You can find those images here.
<https://www.lmi.is/landupplysingar/loftmyndasafn-2-2/>
I cant find any inforamtion on the cameras they used.
Thanks for responding.
Þórir
On Sunday, 21 April 2019 07:51:12 UTC, GnomeNomad wrote:
Hey, thanks for sharing the pictures. Loved them, big and sharp. :)
Very big - 446.8MB per image! What kind of drone/camera did you
use?
The focal length Hugin PTO Generator came up with was 34.607 with a
multiplier of 1.
I stitched all 4 of them, full sized, in Hugin on my Linux
laptop. First
ran the Hugin PTO Generator. Then opened the PTO in Hugin, ran the
CPFind + Celeste option on it. Ran the Positions Incremental
geometric
otpimization. Cleaned the control points. On the Masks tab,
masked out
the corner notch and the black borders on the images. Ran the
Positions
and Barrel Distortion (yp4b) geometric optimization. Went to the
Fast
Preview, set it to Rectilinear projection. Clicked the Center
button on
Move/Drag tab, then Autocrop. On the Stitcher tab, I clicked
Calculate
Optimal Size. I experimented with various photometric
optimizations and
finally decided to just leave it untouched.
Saved the PTO and ran the stitch. Stitching took 4 minutes on my
2.4GHz
i7 processor.
Memory usage peaked at 10.8GB (my laptop has 16GB). That could
affect
things on machines with less memory or other operating systems. My
office laptop with Windows 7 Enterprise and 8GB of memory uses just
about 4GB of memory for Windows and the assorted
enterprise-mandated
security applications. So I suspect the fact that stitching
stopped and
produced a corrupted file on your computer means your computer
ran out
of memory and something didn't respond well to using swap space.
I ended up with a 932.9MB 48-bit TIFF file. Ran the stitch again to
output a JPG and got a 345.3MB file.
Thank you again for the pictures. I currently shoot mere 6Mpixel
48-bit
TIFF and plan to move to a 42-45Mpixel camera in the future.
Nice to
know that my present set up can handle large images!
On 4/17/19 8:30 AM, Wirz wrote:
> Hi,
>
> I think there is nothing wrong with your pictures. I gave
the first
> first two a try and they stitch fine
> (http://78.46.190.157:8080/first-two.jpg
<http://78.46.190.157:8080/first-two.jpg>).
>
> Mostly that is, because there is a conceptual problem with
aerial
> pictures: You can either stitch photos of any scene (with all
the photos
> taken from the same point), or of a flat surface (with almost
arbitrary
> camera positions). Given that Iceland is not flat, and
airplanes are
> not stationary, neither approximation is perfect. But if
some artefacts
> are acceptable you can assume that the ground is flat enough
and the
> result won't be too bad.
>
> cheers, lukas
>
>
>
> On 17/04/2019 17:48, Kameldýrið wrote:
>> The focal length is 151,78 mm on those
>>
>> On Wednesday, 17 April 2019 14:40:05 UTC, Kameldýrið wrote:
>>>
>>> Hi Terry.
>>> Whenever hugin stitches them together it stops responding
and results in a
>>> corrupt file.
>>> I dont know if its due to their size (they're fairly large
tiffs) or to my
>>> computers limitations.
>>> The tiff files of the 4 photos can be downloaded if you
would like to
>>> recreate. (500
>>>
<https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8500
<https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8500>>,
>>> 501
>>>
<https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8501
<https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8501>>,
>>> 502
>>>
<https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8502
<https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8502>>,
>>> 503
>>>
<https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8503
<https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8503>>
>>> )
>>>
>>> Thanks for responding
>>>
>>> On Wednesday, 17 April 2019 02:50:51 UTC, Tduell wrote:
>>>>
>>>> On Wed, 17 Apr 2019 06:48:01 +1000, Kameldýrið
>>>> <[email protected]> wrote:
>>>>
>>>>> Hi. I'm new to hugin an I wanted to know if there's a way
to stitch
>>>>> aerial
>>>>> photos.
>>>>> I have 4 photos I'd like to stich together but I don't
know how.
>>>>> Any help is appreciated.
>>>>>
>>>>
>>>> Have you read the tutorials ?
>>>> <http://hugin.sourceforge.net/tutorials/index.shtml
<http://hugin.sourceforge.net/tutorials/index.shtml>>
>>>> Assuming that your images have a reasonable amount of
overlap, I'd
>>>> suggest
>>>> you have a try and if you run into difficulties, then come
back here with
>>>>
>>>> details of your problems.
>>>>
>>>> Cheers,
>>>> --
>>>> Regards,
>>>> Terry Duell
--
David W. Jones
[email protected]
wandering the landscape of god
http://dancingtreefrog.com
--
A list of frequently asked questions is available at:
http://wiki.panotools.org/Hugin_FAQ
---
You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/hugin-ptx/9f63c6f6-3d6e-c36d-17a5-0cd70897b4c9%40gmail.com.
For more options, visit https://groups.google.com/d/optout.