Sorry, here are correct links:

http://clanjones.org/porirtestpano/LMI-Kort-J36-J-8500-LMI-Kort-J36-J-8503.tif
http://clanjones.org/porirtestpano/LMI-Kort-J36-J-8500-LMI-Kort-J36-J-8503.pto

On 5/7/19 9:06 AM, Þórir wrote:
I havent got any much better results yet. Both links give a 404 error when i click on them

On Wednesday, 1 May 2019 07:42:35 UTC, GnomeNomad wrote:

    Here's me redo of it, with steps, output image and PTO.

    Steps (just to make sure I remembered what I did).

    1. Select the 4 images in my file manager, right click, select "Open
    With ... Hugin PTO generater.

    2. Open the PTO in Hugin.

    3. Run Create control points option "Hugins CPFind + Celest (slower,
    but
    no CPS on clouds).

    4. Optimize geometric (incremental, starting from anchor). My run
    reported this:
    Results:
       average control point distance: 22.408888
       standard deviation: 77.171264
       maximum: 339.069320

    5. Cleaned control points. That removed 7.

    6. Crop all images from this lens to remove the notched corner.

    7. Optimize geometric Positions, View and Barrel (y,p,r,v,b).

    8. Preview panorama in Fast Panorama Preview window. While there, set
    projection to Rectilinear. On Move/Drag tab, click Center button.

    9. Optimize geometric positions: Everything without translation.

    10. In Fast Panorama Preview, click Center button again to
    re-center. On
    the Crop tab in Fast Panorama Preview, click Autocrop. Close Fast
    Panorama Preview.

    11. Click calculate optimize size. Gave me 27012 width, 60777 height.

    12. Save pano and stitch.

    NOTE: Didn't run vertical lines search. Vertical lines make no sense
    for
    these images. I think vertical lines here could really screw things up.

    Didn't optimize exposure at all. First time I tried this, I tried
    optimizing exposure, and it came out all overexposed and wrong. So I
    decided to go without it.

    Also, after you mentioned the source of these images (scanned film from
    some unknown aerial camera) and that it was professionally shot, I
    decided that they would have shot them all at the same exposure. If
    they
    were also professionally scanned, I'm pretty sure they're all the same
    exposure. So I left the exposure as it was, without optimization.

    Link for the image and PTO file:

    
http://clanjones.org/david/porirtestpano/LMI-Kort-J36-J-8500-LMI-Kort-J36-J-8503.tif
    
<http://clanjones.org/david/porirtestpano/LMI-Kort-J36-J-8500-LMI-Kort-J36-J-8503.tif>

    
http://clanjones.org/david/porirtestpano/LMI-Kort-J36-J-8500-LMI-Kort-J36-J-8503.pto
    
<http://clanjones.org/david/porirtestpano/LMI-Kort-J36-J-8500-LMI-Kort-J36-J-8503.pto>


    The TIF is 748.8MB, 48bit TIFF. 24736 wide, 10515 height. 82.5" by 35"
    at 300 dots per inch in the USA's archaic measurement system.

    Let me know when you get them.

    A quick look through showed me a few artefacts: minor jogs in a house
    and a street at a few places. Those might originate in the geometric
    optimization process. Maybe optimizing for translation, too, would
    help,
    since these were shot from a moving airplane so the camera was moving.
    I'm not familiar with using translation. Other folk on the list
    would be
    better helpers with that.

    What do you think?

    On 4/27/19 5:45 AM, Kameldýrið wrote:
     > hugin1.PNG
     >
     > hugin0.PNGHi again.
     > I tried a procedure  silmilar to one that you described
     > I ended up with an image with farly much over-exposure and and
    artefacts.
     > Is there anything that I am doing wrong that I can do to improve
    my results?
     > Could you perhaps upload your result image?
     >
     > Thanks.
     > Þórir.
     >
     >
     > On Sunday, 21 April 2019 07:51:12 UTC, GnomeNomad wrote:
     >
     >     Hey, thanks for sharing the pictures. Loved them, big and
    sharp. :)
     >
     >     Very big - 446.8MB per image! What kind of drone/camera did
    you use?
     >
     >     The focal length Hugin PTO Generator came up with was 34.607
    with a
     >     multiplier of 1.
     >
     >     I stitched all 4 of them, full sized, in Hugin on my Linux
    laptop.
     >     First
     >     ran the Hugin PTO Generator. Then opened the PTO in Hugin,
    ran the
     >     CPFind + Celeste option on it. Ran the Positions Incremental
    geometric
     >     otpimization. Cleaned the control points. On the Masks tab,
    masked out
     >     the corner notch and the black borders on the images. Ran the
    Positions
     >     and Barrel Distortion (yp4b) geometric optimization. Went to
    the Fast
     >     Preview, set it to Rectilinear projection. Clicked the Center
    button on
     >     Move/Drag tab, then Autocrop. On the Stitcher tab, I clicked
    Calculate
     >     Optimal Size. I experimented with various photometric
    optimizations and
     >     finally decided to just leave it untouched.
     >
     >     Saved the PTO and ran the stitch. Stitching took 4 minutes on
    my 2.4GHz
     >     i7 processor.
     >
     >     Memory usage peaked at 10.8GB (my laptop has 16GB). That
    could affect
     >     things on machines with less memory or other operating
    systems. My
     >     office laptop with Windows 7 Enterprise and 8GB of memory
    uses just
     >     about 4GB of memory for Windows and the assorted
    enterprise-mandated
     >     security applications. So I suspect the fact that stitching
    stopped and
     >     produced a corrupted file on your computer means your
    computer ran out
     >     of memory and something didn't respond well to using swap space.
     >
     >     I ended up with a 932.9MB 48-bit TIFF file. Ran the stitch
    again to
     >     output a JPG and got a 345.3MB file.
     >
     >     Thank you again for the pictures. I currently shoot mere
    6Mpixel 48-bit
     >     TIFF and plan to move to a 42-45Mpixel camera in the future.
    Nice to
     >     know that my present set up can handle large images!
     >
     >     On 4/17/19 8:30 AM, Wirz wrote:
     >      > Hi,
     >      >
     >      > I think there is nothing wrong with your pictures.  I gave
    the first
     >      > first two a try and they stitch fine
     >      > (http://78.46.190.157:8080/first-two.jpg
    <http://78.46.190.157:8080/first-two.jpg>
     >     <http://78.46.190.157:8080/first-two.jpg
    <http://78.46.190.157:8080/first-two.jpg>>).
     >      >
     >      > Mostly that is, because there is a conceptual problem with
    aerial
     >      > pictures: You can either stitch photos of any scene (with
    all the
     >     photos
     >      > taken from the same point), or of a flat surface (with almost
     >     arbitrary
     >      > camera positions).  Given that Iceland is not flat, and
    airplanes
     >     are
     >      > not stationary, neither approximation is perfect.  But if
    some
     >     artefacts
     >      > are acceptable you can assume that the ground is flat
    enough and the
     >      > result won't be too bad.
     >      >
     >      > cheers, lukas
     >      >
     >      >
     >      >
     >      > On 17/04/2019 17:48, Kameldýrið wrote:
     >      >> The focal length is 151,78 mm on those
     >      >>
     >      >> On Wednesday, 17 April 2019 14:40:05 UTC, Kameldýrið wrote:
     >      >>>
     >      >>> Hi Terry.
     >      >>> Whenever hugin stitches them together it stops
    responding and
     >     results in a
     >      >>> corrupt file.
     >      >>> I dont know if its due to their size (they're fairly large
     >     tiffs) or to my
     >      >>> computers limitations.
     >      >>> The tiff files of the 4 photos can be downloaded if you
    would
     >     like to
     >      >>> recreate. (500
     >      >>>
> <https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8500
    
<https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8500>

> <https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8500
    
<https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8500>>>,

     >
     >      >>> 501
     >      >>>
> <https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8501
    
<https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8501>

> <https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8501
    
<https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8501>>>,

     >
     >      >>> 502
     >      >>>
> <https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8502
    
<https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8502>

> <https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8502
    
<https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8502>>>,

     >
     >      >>> 503
     >      >>>
> <https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8503
    
<https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8503>

> <https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8503
    
<https://atlas.lmi.is/getfile/tif_loftmynd.php?id=/mnt/loftmvolmc/loftmvolm8/loftm_vol_8/J36-J-8503>>>

     >
     >      >>> )
     >      >>>
     >      >>> Thanks for responding
     >      >>>
     >      >>> On Wednesday, 17 April 2019 02:50:51 UTC, Tduell wrote:
     >      >>>>
     >      >>>> On Wed, 17 Apr 2019 06:48:01 +1000, Kameldýrið
     >      >>>> <[email protected]> wrote:
     >      >>>>
     >      >>>>> Hi. I'm new to hugin an I wanted to know if there's a
    way to
     >     stitch
     >      >>>>> aerial
     >      >>>>> photos.
     >      >>>>> I have 4 photos I'd like to stich together but I don't
    know how.
     >      >>>>> Any help is appreciated.
     >      >>>>>
     >      >>>>
     >      >>>> Have you read the tutorials ?
     >      >>>> <http://hugin.sourceforge.net/tutorials/index.shtml
    <http://hugin.sourceforge.net/tutorials/index.shtml>
     >     <http://hugin.sourceforge.net/tutorials/index.shtml
    <http://hugin.sourceforge.net/tutorials/index.shtml>>>
     >      >>>> Assuming that your images have a reasonable amount of
    overlap,
     >     I'd
     >      >>>> suggest
     >      >>>> you have a try and if you run into difficulties, then come
     >     back here with
     >      >>>>
     >      >>>> details of your problems.
     >      >>>>
     >      >>>> Cheers,
     >      >>>> --
     >      >>>> Regards,
     >      >>>> Terry Duell

--
David W. Jones
[email protected]
wandering the landscape of god
http://dancingtreefrog.com

--
A list of frequently asked questions is available at: 
http://wiki.panotools.org/Hugin_FAQ
--- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/hugin-ptx/934c4b0c-136f-e538-afef-0e4c9f67dd9e%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to