I've got a few problems concerning the RM1x and mpc2000. I have had this duo
with me for live pa for a few weeks now, but my friend loned me the sampler
so I could write a set for next weekend, the only thing is he was the one
that used it all the time, so I can't figure out the mpc2000 that well at
all. Does anyone have tips on how I can pair these two up correctly for the
best combonation?
Dustin Zahn
----- Original Message -----
From: Mark Holloway <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Friday, April 14, 2000 9:46 AM
Subject: Re: a3k/nord triggering from rm1x: help
> Midi supports channels 1 - 16. Each channel should only be assigned to
one
> part. For example, the Nord is 4 part multitimboral. That means you can
> assign bank "A" to midi channel one, B to two, C to three, and D to four.
> It's like having 4 Nord Leads! However, if another Midi instrument in
your
> studio is also assigned channel one, then both channel ones will play at
the
> same time. So if your A3000 is set up to use channel one for piano and
the
> Nord's bank "A" is also for channel one, you'll hear both. You manual for
> each device tells you how to change midi channels. So if your Nord is you
> control synth, assign channels 1-4 for the four banks. Then you can
assign
> the A3000 channels 5-8 (but it could be 5 and 6 or just 5 if you wanted!).
> Also, the RM1x has internal sounds and you need to "turn off" the internal
> sound channels if you are sending them via midi to an external device.
> Remember, aside from sequencing, the RM1x is a real midi instrument as
well.
>
>
> ----- Original Message -----
> From: cris f <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Wednesday, April 12, 2000 5:24 PM
> Subject: a3k/nord triggering from rm1x: help
>
>
> > Hi, i'm using my a3k for a piano line in one of my tunes, but for some
> > reason, notes that are being played by my nord are also be played on my
> a3k.
> > Has anyone experienced this type of problem where the midi notes from
one
> > machine are being triggered on another machine? Any tips? It wasn't
> > happening in my soft seqencer, so i'm wondering it the rm1x is the
> culprit.
> > Thanx in advance,
> > cris f
> >
>
>
