Pak Nardipta, Saya dapat info yang dicari mungkin cocok dengan yang diperlukan, agennya ada di Bandung Juga :
*PT. BINTANG TIARA INDONESIA* *Agen ** **drilling mud (CMC HV = Chemical High Viscosity) di Indonesia*** * * *DESCRIPTION* CMC-HV is a technical grade sodium carboxymethylcullulose, a long chain colloid used in water base mud system to develop viscosity and/or water loss control. It is a powder which is easily dispersible into the drilling fluid system. CMC ia available in two viscosity ranges: low viscosity (LV) and high viscosity (HV). The low viscosity product, CMC-LV meets OCMA Specification DFCP-2, as well as all API Specification 13 requirements as a CMC filtrate reducing agent. CMC-HV exceed OCMA Specification DFCP-7, as well as all API Specification 13 requirements for high viscosity CMC as a filtrate reducing agent. CMC-HV meets OCMA Specification DFCP-7 as a thickening agent for water base mud systems. *APPLICATION* CMC is an effective fluid loss control agent in most water base mud systems, including systems of sea or salt water as the makeup fluid. CMC-LV perform this function without imparting additional viscosity to the system whereas CMC-HV performs the function while imparting viscosity. CMC is relatively stable to temperatures of 300 oF (148.8 oC) and is not readily subject to fermentation. *RECOMMENDED TREATMENT* For fluid loss control in sea and salt muds concentrations of between 0.5 to 2 ppb (1.42 to 5.7 kg/m3) of CMC-LV is recommended. For viscosity development a concentration of between 0.5 to 3.0 ppb (1.4 to 8.6 kg/m3) of CMC-HV is recommended. A Messina engneer is available for consultation regarding the use of two product grades, CMC-LV and CMC-HV best suited to meet the requirements of the operator or the drilling situation. *PACKAGING* CMC is normally packaged in 25 kg export paperbags. Special packaging, such as a woven polyprolylene outer bag, palletization, wrapping and strapping is available on request. Saya temukan agennya kata Mbah Google di sini : *P.T. BINTANG TIARA CITRA INDONESIA** Jl. Ciganitri Raya No.7 Bandung 40287 - Jawa Barat - Indonesia Tel. 62 22 7500 835 Fax. 62 22 7500 863 Email : bis...@bintangtiaracitra.com http://www.bintangtiaracitra.com <http://bintangtiaracitra.com/>* Salam, Luhkito Hs. www.positionconsultant.com 2013/3/28 nardipta pratama <nardipt...@gmail.com> > > Salam Hormat Rekan2x IAGI, > > > Saya sekarang ini sedang mencari informasi toko di Balikpapan dan > Surabaya yang menjual drilling mud (CMC HV = Chemical High Viscosity). > Drilling Mud ini dipakai untuk pelaksanaan pemboran geoteknik. > Spesifikasinya seperti dibawah ini: > > > > *API 13A Specification* > > *CMC HV* > > Dial Reading at 600rpm,**** > > Fann 35 viscometer**** > > Filtrate Volume, ml**** > > -In de-ionized Water:30 min.**** > > -In 40g/l salt water:30 min**** > > -In saturated salt water: 30 min**** > > 10 max > <i...@duta-marine.com> > > Saya sudah check scomi website dan di internet , tapi belum dapat > informasi toko dan harga. > > Mungkin drilling Mud ini juga biasa digunakan untuk explorasi migas pada > RIG Jack up or platform. Biasanya Mud / drilling Engineer tahu ttg hal ini. > > Jika rekan 2x ada informasi mengenai toko yg jual CMC HV drilling mud di > Balikpapan dan Surabaya, appreciated jika dishare ke saya. > Terima kasih dan salam, > Nardipta > **** > > **** > >