Thanks Pak Luhkito, Nanti saya coba kontak mas Revkinya.
Semakin bnyak referensi, memudahkan kita cari barang. Trims, Np Powered by Telkomsel BlackBerry® -----Original Message----- From: Luhkito Hadisoemarto <lkt...@gmail.com> Sender: <iagi-net@iagi.or.id> Date: Thu, 28 Mar 2013 17:44:32 To: <iagi-net@iagi.or.id> Reply-To: iagi-net@iagi.or.id Subject: Re: [iagi-net] CMC HV Drilling Mud Sama-sama Pak, saya sudah kontak ke PT tersebut yang kebetulan 1 kota dengan saya, saya sudah bicara dengan Marketing Officernya, Namanya Pak Revki (HP : 08182229090), info sementara barang tersedia, dengan harga per bag (25kg) = 51 USD. Silahkan dihubungi langsung dulu mumpung masih anget. Saya sudah bilang kalau Pak Nardipta akan menghubungi Pak Revki. Salam, *Luhkito Hadisoemarto* 087718200048 On Thu, Mar 28, 2013 at 5:24 PM, nardipta pratama <nardipt...@gmail.com>wrote: > Pak Luhkito, > > Terimakasih untuk sharingnya. Really appreciated. > > Jika ada di tempat lain selain balikpapan dan surabaya , boleh juga . Saya > sedang survey dahulu, supaya suatu saat jika kekurangan ada beberapa > cadangan. > > Mohon dishare jika ada daerah lain yg menyediakan ini. > > Terimakasih > > NP > > On Thu, Mar 28, 2013 at 6:16 PM, Luhkito Hadisoemarto <lkt...@gmail.com>wrote: > >> Pak Nardipta, >> >> Saya dapat info yang dicari mungkin cocok dengan yang diperlukan, agennya >> ada di Bandung Juga : >> >> *PT. BINTANG TIARA INDONESIA* >> >> *Agen ** **drilling mud (CMC HV = Chemical High Viscosity) di Indonesia* >> ** >> >> * * >> >> *DESCRIPTION* >> >> CMC-HV is a technical grade sodium carboxymethylcullulose, a long chain >> colloid used in water base mud system to develop viscosity and/or water >> loss control. It is a powder which is easily dispersible into the drilling >> fluid system. >> >> CMC ia available in two viscosity ranges: low viscosity (LV) and high >> viscosity (HV). The low viscosity product, CMC-LV meets OCMA Specification >> DFCP-2, as well as all API Specification 13 requirements as a CMC filtrate >> reducing agent. CMC-HV exceed OCMA Specification DFCP-7, as well as all API >> Specification 13 requirements for high viscosity CMC as a filtrate reducing >> agent. CMC-HV meets OCMA Specification DFCP-7 as a thickening agent for >> water base mud systems. >> >> >> >> *APPLICATION* >> >> CMC is an effective fluid loss control agent in most water base mud >> systems, including systems of sea or salt water as the makeup fluid. CMC-LV >> perform this function without imparting additional viscosity to the system >> whereas CMC-HV performs the function while imparting viscosity. >> >> CMC is relatively stable to temperatures of 300 oF (148.8 oC) and is not >> readily subject to fermentation. >> >> >> >> *RECOMMENDED TREATMENT* >> >> For fluid loss control in sea and salt muds concentrations of between 0.5 >> to 2 ppb (1.42 to 5.7 kg/m3) of CMC-LV is recommended. >> >> For viscosity development a concentration of between 0.5 to 3.0 ppb (1.4 >> to 8.6 kg/m3) of CMC-HV is recommended. >> >> A Messina engneer is available for consultation regarding the use of two >> product grades, CMC-LV and CMC-HV best suited to meet the requirements of >> the operator or the drilling situation. >> >> >> *PACKAGING* >> >> CMC is normally packaged in 25 kg export paperbags. Special packaging, >> such as a woven polyprolylene outer bag, palletization, wrapping and >> strapping is available on request. >> >> >> Saya temukan agennya kata Mbah Google di sini : >> >> >> >> *P.T. BINTANG TIARA CITRA INDONESIA** >> Jl. Ciganitri Raya No.7 >> Bandung 40287 - Jawa Barat - Indonesia >> Tel. 62 22 7500 835 >> Fax. 62 22 7500 863 >> Email : bis...@bintangtiaracitra.com >> http://www.bintangtiaracitra.com <http://bintangtiaracitra.com/>* >> >> Salam, >> >> Luhkito Hs. >> www.positionconsultant.com >> >> 2013/3/28 nardipta pratama <nardipt...@gmail.com> >> >>> >>> Salam Hormat Rekan2x IAGI, >>> >>> >>> Saya sekarang ini sedang mencari informasi toko di Balikpapan dan >>> Surabaya yang menjual drilling mud (CMC HV = Chemical High Viscosity). >>> Drilling Mud ini dipakai untuk pelaksanaan pemboran geoteknik. >>> Spesifikasinya seperti dibawah ini: >>> >>> >>> >>> *API 13A Specification* >>> >>> *CMC HV* >>> >>> Dial Reading at 600rpm,**** >>> >>> Fann 35 viscometer**** >>> >>> Filtrate Volume, ml**** >>> >>> -In de-ionized Water:30 min.**** >>> >>> -In 40g/l salt water:30 min**** >>> >>> -In saturated salt water: 30 min**** >>> >>> 10 max >>> <i...@duta-marine.com> >>> >>> Saya sudah check scomi website dan di internet , tapi belum dapat >>> informasi toko dan harga. >>> >>> Mungkin drilling Mud ini juga biasa digunakan untuk explorasi migas pada >>> RIG Jack up or platform. Biasanya Mud / drilling Engineer tahu ttg hal ini. >>> >>> Jika rekan 2x ada informasi mengenai toko yg jual CMC HV drilling mud di >>> Balikpapan dan Surabaya, appreciated jika dishare ke saya. >>> Terima kasih dan salam, >>> Nardipta >>> **** >>> >>> **** >>> >>> >> >
