Pak Luhkito, Terimakasih untuk sharingnya. Really appreciated.
Jika ada di tempat lain selain balikpapan dan surabaya , boleh juga . Saya sedang survey dahulu, supaya suatu saat jika kekurangan ada beberapa cadangan. Mohon dishare jika ada daerah lain yg menyediakan ini. Terimakasih NP On Thu, Mar 28, 2013 at 6:16 PM, Luhkito Hadisoemarto <lkt...@gmail.com>wrote: > Pak Nardipta, > > Saya dapat info yang dicari mungkin cocok dengan yang diperlukan, agennya > ada di Bandung Juga : > > *PT. BINTANG TIARA INDONESIA* > > *Agen ** **drilling mud (CMC HV = Chemical High Viscosity) di Indonesia** > * > > * * > > *DESCRIPTION* > > CMC-HV is a technical grade sodium carboxymethylcullulose, a long chain > colloid used in water base mud system to develop viscosity and/or water > loss control. It is a powder which is easily dispersible into the drilling > fluid system. > > CMC ia available in two viscosity ranges: low viscosity (LV) and high > viscosity (HV). The low viscosity product, CMC-LV meets OCMA Specification > DFCP-2, as well as all API Specification 13 requirements as a CMC filtrate > reducing agent. CMC-HV exceed OCMA Specification DFCP-7, as well as all API > Specification 13 requirements for high viscosity CMC as a filtrate reducing > agent. CMC-HV meets OCMA Specification DFCP-7 as a thickening agent for > water base mud systems. > > > > *APPLICATION* > > CMC is an effective fluid loss control agent in most water base mud > systems, including systems of sea or salt water as the makeup fluid. CMC-LV > perform this function without imparting additional viscosity to the system > whereas CMC-HV performs the function while imparting viscosity. > > CMC is relatively stable to temperatures of 300 oF (148.8 oC) and is not > readily subject to fermentation. > > > > *RECOMMENDED TREATMENT* > > For fluid loss control in sea and salt muds concentrations of between 0.5 > to 2 ppb (1.42 to 5.7 kg/m3) of CMC-LV is recommended. > > For viscosity development a concentration of between 0.5 to 3.0 ppb (1.4 > to 8.6 kg/m3) of CMC-HV is recommended. > > A Messina engneer is available for consultation regarding the use of two > product grades, CMC-LV and CMC-HV best suited to meet the requirements of > the operator or the drilling situation. > > > *PACKAGING* > > CMC is normally packaged in 25 kg export paperbags. Special packaging, > such as a woven polyprolylene outer bag, palletization, wrapping and > strapping is available on request. > > > Saya temukan agennya kata Mbah Google di sini : > > > > *P.T. BINTANG TIARA CITRA INDONESIA** > Jl. Ciganitri Raya No.7 > Bandung 40287 - Jawa Barat - Indonesia > Tel. 62 22 7500 835 > Fax. 62 22 7500 863 > Email : bis...@bintangtiaracitra.com > http://www.bintangtiaracitra.com <http://bintangtiaracitra.com/>* > > Salam, > > Luhkito Hs. > www.positionconsultant.com > > 2013/3/28 nardipta pratama <nardipt...@gmail.com> > >> >> Salam Hormat Rekan2x IAGI, >> >> >> Saya sekarang ini sedang mencari informasi toko di Balikpapan dan >> Surabaya yang menjual drilling mud (CMC HV = Chemical High Viscosity). >> Drilling Mud ini dipakai untuk pelaksanaan pemboran geoteknik. >> Spesifikasinya seperti dibawah ini: >> >> >> >> *API 13A Specification* >> >> *CMC HV* >> >> Dial Reading at 600rpm,**** >> >> Fann 35 viscometer**** >> >> Filtrate Volume, ml**** >> >> -In de-ionized Water:30 min.**** >> >> -In 40g/l salt water:30 min**** >> >> -In saturated salt water: 30 min**** >> >> 10 max >> <i...@duta-marine.com> >> >> Saya sudah check scomi website dan di internet , tapi belum dapat >> informasi toko dan harga. >> >> Mungkin drilling Mud ini juga biasa digunakan untuk explorasi migas pada >> RIG Jack up or platform. Biasanya Mud / drilling Engineer tahu ttg hal ini. >> >> Jika rekan 2x ada informasi mengenai toko yg jual CMC HV drilling mud di >> Balikpapan dan Surabaya, appreciated jika dishare ke saya. >> Terima kasih dan salam, >> Nardipta >> **** >> >> **** >> >> >
