I just started thinking This doesn't make sense I tested this scenario with the ECB pointing to SP 241
Rob (Scott) Edward (Jaffe) Forgot one more piece of info The Wait occurs Under a Different Task (TCB) Then were SP 241 was obtained The 241 was obtained Under the Main Task Before I Created the Task's (to do the READ/WRITE) sockets I know all virtual storage is associated with a TCB So when I pointed the ECB to SP=0 it was obtained under TCB for which I was doing the WAIT makes sense ??? -----Original Message----- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Joe Reichman Sent: Wednesday, December 16, 2009 10:09 PM To: IBM-MAIN@bama.ua.edu Subject: Re: SYSTEM COMPLETION CODE=102 REASON CODE=0000000C I finally got it working Apparently IEAVPST does like an ECB in CSA or CSA key=8 When I pointed the ECB to WS_DSECT or SP=0 private it worked LA RX,WS_ECB ST RX,CSA_KEY8_ECB store address In Posted program L RX,ASCB LA RY,CSA_KEY8_ECB L RY,0(,RY) POST (RY),ASCB=(RX),ERRET=XXXX,ECBKEY=8 Thankx again -----Original Message----- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Rob Scott Sent: Wednesday, December 16, 2009 2:42 PM To: IBM-MAIN@bama.ua.edu Subject: Re: SYSTEM COMPLETION CODE=102 REASON CODE=0000000C Joe, Key8 CSA - yuk - I cannot think of any good reasons for it. Do you have an SVC dump? What is the PSW before you XMPOST ? (Cos you have to be one (or more) of APF/Key0-7/Sup to issue XMPOST with ASCB + ECBKEY). Have you verified the plist passed to POST? What does the systrace show ? Rob Scott Developer Rocket Software 275 Grove Street * Newton, MA 02466-2272 * USA Tel: +1.617.614.2305 Email: rsc...@rs.com Web: www.rocketsoftware.com -----Original Message----- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Joe Reichman Sent: 16 December 2009 18:54 To: IBM-MAIN@bama.ua.edu Subject: Re: SYSTEM COMPLETION CODE=102 REASON CODE=0000000C Thankx for the reply as a side note I appreciate all of your help re: TCP/IP 1) I have verified PASN = HASN By looking at PSAAOLD and control register 4 for that CPU 2) I save the traget ASCB in CSA using PSAAOLD my control block is chained off my SSCB (SSCTUSE) I just look for my 4 character SSID Identfier 3) the ECB is from my control block in CSA didn't think that would a problem (ECB in CSA). SP 241 I know I shouldn't be setting KEY=8 for CSA (Edward Jaffe screamed at me for that but don't think that's the problem I have a good reason for doing that which I am willing to share) 4) The reason code 00C is documented in 1.8 (though we are running 1.9 Thankx again Sent from my iPhone On Dec 16, 2009, at 1:15 PM, Rob Scott <rsc...@rocketsoftware.com> wrote: > Joe, > > Is your PC a space-switch ? > > Have you verified the PASN and HASN before the XM POST? > > Have you taken an SVC dump with both the PASN and HASN included and > verified the storage? > > How did you locate the ASCB for the target address space? > > Does the ECB really exist in the private storage (and correct key) of > the address space specified by your ASCB= keyword? > > S102-C is not documented in my copy of z/OS 1.10 System Codes, however > I am guessing that it might be the result of some sort of program > check taken while POSTing the ECB. > > > > > > Rob Scott > Developer > Rocket Software > 275 Grove Street * Newton, MA 02466-2272 * USA > Tel: +1.617.614.2305 > Email: rsc...@rs.com > Web: www.rocketsoftware.com > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On > Behalf Of Joe Reichman > Sent: 16 December 2009 13:47 > To: IBM-MAIN@bama.ua.edu > Subject: SYSTEM COMPLETION CODE=102 REASON CODE=0000000C > > Hi, > > > > I have been spending days try to resolve this message originally I > thought it was something I had done in a PC rtn following this message > > > > As the message in the DUMP following is > > > > PRIMARY NOT EQUAL TO HOME > > > > But now I am convinced that its IEAVPST that is going cross memory > that causing this message the ECB looks okay so does the ASCB > > > > Below is the code that I use to post the Address Space the address > for the ASCB and ECB seem to be valid > > > > I wrote a 2 small programs to test this out and it worked > > > > If anybody has any hints I would be very grateful > > > > L R6,MYASCB > > LA R7,MYECB > > > > > > POST (R7), ECB > > ASCB=(R6), ASCB > > LINKAGE=SYSTEM, > > ECBKEY=8, > > ERRET=CONT ERROR RTN > > > > CONT DS 0H > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html