I just looked at the zPDT redbook and found there is a settod command, which shoukd be used before IPL.
On Fri, Aug 19, 2011 at 9:34 AM, Alvaro Guirao Lopez <alvarogui...@gmail.com > wrote: > I will see at manuals, zPDT is stopped when you stop z/OS image, it is > supossed that z/OS may work normally so the IPL procedure must works.... > but > its's true that there are other functions that must be done out of the > z/OS, > if i see something, i tell you. > > Thank you Scott > > 2011/8/19 Scott Rowe <scott.r...@joann.com> > > > On a mainframe you can set the TOD clock from the HMC, then re-activate > an > > LPAR to get the new time. Can you just do that on zPDT? > > > > On Fri, Aug 19, 2011 at 9:10 AM, Alvaro Guirao Lopez < > > alvarogui...@gmail.com > > > wrote: > > > > > It's independt, the Linux hour goes his own way and functionality of > the > > > z/OS system under zPDT is like a z/OS system in a mainframe, there is > any > > > way to inform the TOD of z/OS trhough zPDT > > > > > > 2011/8/19 Scott Rowe <scott.r...@joann.com> > > > > > > > Is there maybe a zPDT option to allow updating the TOD clock, or > maybe > > > you > > > > just need to set the Linux clock properly? > > > > > > > > On Fri, Aug 19, 2011 at 8:52 AM, Alvaro Guirao Lopez < > > > > alvarogui...@gmail.com > > > > > wrote: > > > > > > > > > Thanks for the comments, > > > > > > > > > > If anyone have any suggestion will be ver much apreciated, I'm > > > completly > > > > > lost. > > > > > > > > > > > > > > > Best regards and have a nice weekend. > > > > > Álvaro. > > > > > > > > > > 2011/8/19 Binyamin Dissen <bdis...@dissensoftware.com> > > > > > > > > > > > On Fri, 19 Aug 2011 07:18:28 -0500 Jim Thomas < > > > > j...@thethomasresidence.us > > > > > > > > > > > > wrote: > > > > > > > > > > > > :>Switch ?? .. as in a command or a bit ?. > > > > > > > > > > > > A physical switch, young grasshopper. It had to be in the enable > > > > > position. > > > > > > > > > > > > No idea how it is done nowadays. Have not IPLed a real machine in > a > > > > long > > > > > > time. > > > > > > > > > > > > :>Default STPMODE is YES and were it set to NO .. he would > > > > > > :>not get this prompt. That said, he should not set STPMODE > > > > > > :>to NO unless he is prepared to go to STP. > > > > > > > > > > > > :>-----Original Message----- > > > > > > :>From: IBM Mainframe Discussion List [mailto: > > IBM-MAIN@bama.ua.edu] > > > > On > > > > > > Behalf > > > > > > :>Of Binyamin Dissen > > > > > > :>Sent: Friday, August 19, 2011 6:56 AM > > > > > > :>To: IBM-MAIN@bama.ua.edu > > > > > > :>Subject: Re: CLOCK change problem > > > > > > :> > > > > > > :>On Fri, 19 Aug 2011 13:25:59 +0200 Alvaro Guirao Lopez > > > > > > :><alvarogui...@gmail.com> wrote: > > > > > > :> > > > > > > :>:>I have z/OS V1R11, I have changed CLOCK to OPERATOR PROMPT > to > > > > change > > > > > > the > > > > > > :>:>local and UTC/GMT hour. > > > > > > :> > > > > > > :>:>Whe I IPLed the system it prompt reply > > > > > > :> > > > > > > :>:>* 00 IEA888A UTC DATE=2011.231,CLOCK=11.30.00 > > > > > > :>:> IEA888A LOCAL DATE=2011.231,CLOCK=13.30.00 REPLY U, OR > > > > > UTC/LOCAL > > > > > > :>TIME > > > > > > :> > > > > > > :>:>I reply with > > > > > > :> > > > > > > :>:>R 00,DATE=2011.231,CLOCK=11.35.00,UTC > > > > > > :> > > > > > > :>:>Then system issues IEA903A to reply U when the time ocurrs, I > > > reply > > > > > at > > > > > > the > > > > > > :>:>time: > > > > > > :> > > > > > > :>:>R 00,U > > > > > > :> > > > > > > :>:>and then appears again the CLOCK without my change!!!! > > > > > > :> > > > > > > :>:>* 00 IEA888A UTC DATE=2011.231,CLOCK=11.30.00 > > > > > > :>:> IEA888A LOCAL DATE=2011.231,CLOCK=13.30.00 REPLY U, OR > > > > > UTC/LOCAL > > > > > > :>TIME > > > > > > :> > > > > > > :>There used to be a switch to allow the TOD to be altered. > > > > > > :> > > > > > > :>How does the STP affect this? > > > > > > > > > > > > -- > > > > > > Binyamin Dissen <bdis...@dissensoftware.com> > > > > > > http://www.dissensoftware.com > > > > > > > > > > > > Director, Dissen Software, Bar & Grill - Israel > > > > > > > > > > > > > > > > > > Should you use the mailblocks package and expect a response from > > me, > > > > > > you should preauthorize the dissensoftware.com domain. > > > > > > > > > > > > I very rarely bother responding to challenge/response systems, > > > > > > especially those from irresponsible companies. > > > > > > > > > > > > > > > ---------------------------------------------------------------------- > > > > > > For IBM-MAIN subscribe / signoff / archive access instructions, > > > > > > send email to lists...@bama.ua.edu with the message: GET > IBM-MAIN > > > INFO > > > > > > Search the archives at http://bama.ua.edu/archives/ibm-main.html > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > Un saludo. > > > > > Álvaro Guirao > > > > > > > > > > > > ---------------------------------------------------------------------- > > > > > For IBM-MAIN subscribe / signoff / archive access instructions, > > > > > send email to lists...@bama.ua.edu with the message: GET IBM-MAIN > > INFO > > > > > Search the archives at http://bama.ua.edu/archives/ibm-main.html > > > > > > > > > > > > > CONFIDENTIALITY/EMAIL NOTICE: The material in this transmission > > contains > > > > confidential and privileged information intended only for the > > addressee. > > > > If you are not the intended recipient, please be advised that you > have > > > > received this material in error and that any forwarding, copying, > > > printing, > > > > distribution, use or disclosure of the material is strictly > prohibited. > > > > If you have received this material in error, please (i) do not read > it, > > > > (ii) reply to the sender that you received the message in error, and > > > > (iii) erase or destroy the material. Emails are not secure and can be > > > > intercepted, amended, lost or destroyed, or contain viruses. You are > > > deemed > > > > to have accepted these risks if you communicate with us by email. > Thank > > > > you. > > > > > > > > > > > > > ---------------------------------------------------------------------- > > > > For IBM-MAIN subscribe / signoff / archive access instructions, > > > > send email to lists...@bama.ua.edu with the message: GET IBM-MAIN > INFO > > > > Search the archives at http://bama.ua.edu/archives/ibm-main.html > > > > > > > > > > > > > > > > -- > > > Un saludo. > > > Álvaro Guirao > > > > > > ---------------------------------------------------------------------- > > > For IBM-MAIN subscribe / signoff / archive access instructions, > > > send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO > > > Search the archives at http://bama.ua.edu/archives/ibm-main.html > > > > > > > CONFIDENTIALITY/EMAIL NOTICE: The material in this transmission contains > > confidential and privileged information intended only for the addressee. > > If you are not the intended recipient, please be advised that you have > > received this material in error and that any forwarding, copying, > printing, > > distribution, use or disclosure of the material is strictly prohibited. > > If you have received this material in error, please (i) do not read it, > > (ii) reply to the sender that you received the message in error, and > > (iii) erase or destroy the material. Emails are not secure and can be > > intercepted, amended, lost or destroyed, or contain viruses. You are > deemed > > to have accepted these risks if you communicate with us by email. Thank > > you. > > > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO > > Search the archives at http://bama.ua.edu/archives/ibm-main.html > > > > > > -- > Un saludo. > Álvaro Guirao > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html > CONFIDENTIALITY/EMAIL NOTICE: The material in this transmission contains confidential and privileged information intended only for the addressee. If you are not the intended recipient, please be advised that you have received this material in error and that any forwarding, copying, printing, distribution, use or disclosure of the material is strictly prohibited. If you have received this material in error, please (i) do not read it, (ii) reply to the sender that you received the message in error, and (iii) erase or destroy the material. Emails are not secure and can be intercepted, amended, lost or destroyed, or contain viruses. You are deemed to have accepted these risks if you communicate with us by email. Thank you. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
