Cheryl, Anytime, glad I can help
Scott ford www.identityforge.com On May 15, 2012, at 7:28 AM, "Meehan, Cheryl" <cmee...@cswg.com> wrote: > Hi, Scott- > > No changes in Sequence, no new products.... will continue to look for > timing. > > Thanks! > > Cheryl > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On > Behalf Of Scott Ford > Sent: Monday, May 14, 2012 9:35 PM > To: IBM-MAIN@bama.ua.edu > Subject: Re: Netview Question > > Cheryl, > > Your IPL sequence on any of the LPARS havent changed ? New products ? > Have seen sequence issues before , usually turned out to be timing... > > Scott ford > www.identityforge.com > > On May 14, 2012, at 3:16 PM, "Meehan, Cheryl" <cmee...@cswg.com> wrote: > >> Scott- >> >> The reason the resource is not available is because the system it is >> attached to is coming down. Which makes sense, because we're IPLing > it. >> >> We have never had this issue prior to this version of the operating >> system. We do not believe we have any cross LPAR Tasks running that >> we have been able to find thus far. >> >> We plan to check next IPL for any cross netview sessions, and see if a > >> disconnect is necessary, but it has never been required in the past. >> >> Cheryl >> >> -----Original Message----- >> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On >> Behalf Of Scott Ford >> Sent: Monday, May 14, 2012 1:36 PM >> To: IBM-MAIN@bama.ua.edu >> Subject: Re: Netview Question >> >> Cheryl, >> >> Did you review the SNA messages and codes, that's your fist >> step..sense >> 8002 is a resource not available, maybe a timing issue with the IPL > ... >> >> Scott ford >> www.identityforge.com >> >> On May 14, 2012, at 12:21 PM, "Meehan, Cheryl" <cmee...@cswg.com> > wrote: >> >>> Greetings- >>> >>> We upgraded our operating system to z/os 1.11 last fall. We have >>> IPL'd our Production System twice since then, and each time, we have >>> caused our AUTO1 task to fail on our Test System. Last week, we >>> IPL'd >> >>> our test system, and the AUTO1 task dropped on our Production system. > >>> Once recovered, we IPL'd our Test system several more times, and >>> never >> >>> lost AUTO1. >>> >>> The messages that we are seeing are for our EE link between the two >>> system to go down, ( as we are IPLing. . . . ) and then these >>> Messages: >>> >>> MVS2 12134 01:17:32.40 STC35551 00000281 DSI769I MVS02 RPL_EXIT >>> APPCCMD RECEIVE FAILED, LUNAME = MVS01, QUALIFY = >>> X'11', FEEDBACK = >>> (X'4C',X'00',X'80020000') >>> MVS2 12134 01:17:32.40 STC35551 00000281 DSI769I MVS02 RPL_EXIT >>> APPCCMD SEND FAILED, LUNAME = MVS01, QUALIFY = >>> X'07', FEEDBACK = >>> (X'4C',X'00',X'80020000') >>> MVS2 12134 01:17:32.40 STC35551 00000281 DWO575I RMTCMD >> TERMINATED >>> ON CSNET.MVS01 WITH SENSE: X'08A80012' >>> MVS2 12134 01:17:32.40 STC35551 00000281 DSI769I MVS02 RPL_EXIT >>> APPCCMD ALLOC FAILED, LUNAME = MVS01, QUALIFY = >>> X'1F', FEEDBACK = >>> (X'04',X'00',X'087D0001') >>> MVS2 12134 01:17:32.44 STC35551 00000290 IEA631I OPERATOR > AUTO12 >>> NOW INACTIVE, SYSTEM=MVS2 , LU=AUTO1 >>> >>> If anyone else has had this issue, I would appreciate your insight. >>> >>> Cheryl Meehan >>> >>> --------------------------------------------------------------------- >>> - For IBM-MAIN subscribe / signoff / archive access instructions, >>> send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN >> >> ---------------------------------------------------------------------- >> For IBM-MAIN subscribe / signoff / archive access instructions, send >> email to lists...@bama.ua.edu with the message: INFO IBM-MAIN >> >> ---------------------------------------------------------------------- >> For IBM-MAIN subscribe / signoff / archive access instructions, send >> email to lists...@bama.ua.edu with the message: INFO IBM-MAIN > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@bama.ua.edu with the message: INFO IBM-MAIN > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
