On Tue, 26 Jun 2007 11:41:49 -0700, John Mattson <[EMAIL PROTECTED]> wrote:
> os390 2.10 to zOS 1.8 Things were going just fine until I tried to >GIMUNZIP the HFS' and CSI's as part of the "RESTORE" job. I downloaded >every other file in the RESTORE job, except these (//STEP1 and //UNZIP#8 ) >datasets, so I know I have good input, and that the basic plan works. > I tried STEPLIB'ing to the new SMPE and zOS 1.8 LINKLIB's and that >improved things, BUT still no good. > Opened a log with IBM, and they say that the problem is that this >is dependant upon zOS' version of pax which is dependant upon a bunch of >other stuff in USS. They want me to get the Custom Offering Driver, and >IPL on that. I am doing so, but in the meantime, I thought I would check >and see if anyone has any handy work-around for this. > I doubt there is. But the minimum driver requirements are documented *clearly* in the z/OS Planning for Installation manual, so this shouldn't have been a surprise. See Chapter 3. Mark -- Mark Zelden Sr. Software and Systems Architect - z/OS Team Lead Zurich North America / Farmers Insurance Group: G-ITO mailto:[EMAIL PROTECTED] z/OS and OS390 expert at http://searchDataCenter.com/ateExperts/ Systems Programming expert at http://expertanswercenter.techtarget.com/ Mark's MVS Utilities: http://home.flash.net/~mzelden/mvsutil.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html