Lizette:

 I have removed the IBM version of the CBRUXENT, brought down OAM, did a LLA 
refresh, and the display is still incorrect. What version of CA-1 software are 
you running, and what version of Z/OS are you running?

This shop is running CA-1 Version 11.5 SP4, and Z/OS 1.9.

-----Original Message-----
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of 
Lizette Koehler
Sent: Thursday, November 06, 2008 12:13 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: How to correct tape errors

I will check that out.

I know that the one shipped by IBM is in SYS1.LINKLIB at the top of the linklst 
and the one for CA1 is in the SYS1.CA1.LINKLIB data set which is further down.

Lizette


-----Original Message-----
>From: Mark Jacobs <[EMAIL PROTECTED]>
>Sent: Nov 6, 2008 2:21 PM
>To: IBM-MAIN@BAMA.UA.EDU
>Subject: Re: How to correct tape errors
>
>Lizette Koehler wrote:
>> List -
>>
>> I have been wrestling with this for a couple of weeks.  Thought I had it 
>> fixed but it still shows errors.
>>
>> When I display my VTS
>>
>> RESPONSE=SDH8
>>  CBR1110I OAM library status: 410
>>  TAPE      LIB  DEVICE    TOT  ONL  AVL  TOTAL  EMPTY SCRTCH  ON OP
>>  LIBRARY   TYP  TYPE      DRV  DRV  DRV  SLOTS  SLOTS   VOLS
>>  SCSVTS1   VL   3584-L22  128  128  127    959    413   5514  Y  Y
>>  ----------------------------------------------------------------------
>>  MEDIA       SCRATCH       SCRATCH       SCRATCH
>>  TYPE          COUNT     THRESHOLD      CATEGORY
>>  MEDIA2         5514          1000          1002
>>  ----------------------------------------------------------------------
>>  LIBRARY ID: B2764
>>  OPERATIONAL STATE:  AUTOMATED
>>  ERROR CATEGORY SCRATCH COUNT:              14
>>  SCRATCH STACKED VOLUME COUNT:              90
>>  PRIVATE STACKED VOLUME COUNT:              84
>>  ----------------------------------------------------------------------
>>  Bulk input/output not configured.
>>
>> It shows 14 tapes in the error category Scratch Count.
>>
>> I went into ISMF and listed all the volumes and find this type of entry
>>
>> 514454 SCRATCH  REJ BY TAP MGT SYS
>> 517590 SCRATCH  REJ BY TAP MGT SYS
>>
>> I looked in CA1 and cannot figure out how to get these errors removed.
>>
>> Thoughs?
>>
>> Lizette
>>
>>
>> ----------------------------------------------------------------------
>> For IBM-MAIN subscribe / signoff / archive access instructions,
>> send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
>> Search the archives at http://bama.ua.edu/archives/ibm-main.html
>>
>>
>>
>Check your OAM cartridge entry installation exit,  CBRUXENT.
>---
>
>Mark Jacobs
>Time Customer Service
>Tampa, FL
>----
>
>"We're in the stickiest situation since Sticky the
>stick insect got stuck on a sticky bun."
>
>Rowan Atkinson as Captain Edmund Blackadder in
>Blackadder Goes Forth
>
>----------------------------------------------------------------------
>For IBM-MAIN subscribe / signoff / archive access instructions,
>send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
>Search the archives at http://bama.ua.edu/archives/ibm-main.html
>

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Reply via email to