> -----Original Message----- > From: IBM Mainframe Discussion List On Behalf Of Pommier, Rex R. > > Hi. > > Apparently I misunderstood and thought you had just installed PSF into > the 1.8 LINKLIB by accident and wanted to correct the DDDEF and re-apply > it. Am I correct now in guessing that you have PSF installed and > working in the 1.8 LINKLIB and you want to reinstall it into a 1.9 or > 1.10 new environment? Has PSF been ACCEPTED into the 1.8 level DLIBs? > > If SMP/E is complaining that PSF isn't in the GLOBAL zone, you will need > to RECEIVE it back into the GLOBAL zone then you can apply it. If you > are using the same CSI you used the first time you installed PSF, you > will need to use the REDO and SELECT parameters like I mentioned before.
If the product has been ACCEPTed and you haven't applied subsequent maintenance that is not also ACCEPTed, you might consider the SMP/E BUILDMCS command, then RECEIVE, APPLY and ACCEPT its output deck. -jc- ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html