We have sys1.sceelked in linklist. But I feel we should use below parm to
restore from backup, but not sure.
RESTORE INDDNAME(TAPE) OUTDDNAME(DASD1) -
DATASET(INCLUDE(**)) TOL(ENQF) WAIT(0,0)
On Wed, Oct 1, 2014 at 3:12 PM, גדי בן אבי <gad...@malam.com> wrote:
> I would restore the library first to a different name, shut down lla, and
> unallocated from xcfas, rename and then restart lla and allocate to Xcfas.
>
> We do not have sceelked in the linklist. Are you sure you need it there?
>
> Gadi
>
> -----Original Message-----
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Anthony Thompson
> Sent: Wednesday, October 01, 2014 12:36 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: SCEELKED Restore
>
> I think you can do this by:
>
> 1) remove the LLA enqueue by shutting down LLA on all system in the
> sysplex (and wear the performance hit for a while)
>
> 2) remove the XCFAS enqueue by issuing command SETPROG LNKLST,UNALLOCATE
> on all systems
>
> Restore your dataset. Maybe to an alternate residence volume which should
> probably be staged into the sysplex by appropriate IPL's
>
> Then commands SETPROG LNKLST, ALLOCATE and S LLA,SUB=MSTR (maybe with a
> LLA=xx parm)
>
> Ant.
>
> -----Original Message-----
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Mainframe Mainframe
> Sent: Wednesday, 1 October 2014 6:39 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: SCEELKED Restore
>
> Hi Group,
> We have some issues wth SYS1.SCEELKED and want to restore
> from backup, but
> SYSTEM DATASET JOBNAME DISP
> STATUS
> ------ -------------------------------------------- ------- -----
> ------
> MVS1 SYS1.SCEELKED XCFAS SHR
> USING
> MVS1 SYS1.SCEELKED LLA SHR
> USING
> MVS2 SYS1.SCEELKED XCFAS SHR
> USING
> MVS2 SYS1.SCEELKED LLA SHR
> USING
> MVS3 SYS1.SCEELKED XCFAS SHR
> USING
> MVS3 SYS1.SCEELKED LLA SHR
> USING
> MVS4 SYS1.SCEELKED XCFAS SHR
> USING
> MVS4 SYS1.SCEELKED LLA SHR
> USING
>
>
> As, we have system running under sysplex, so we getting above output of
> this been in use by LLA and XCFAS.
>
> Initially I thought of using below link for Update linklst dynamically.
>
> http://www.ruifeio.com/2009/06/29/update-linklist-dynamically
>
> but, as SYS1.SCEELKED is core system library, so I was afraid of doing it
> as many subsystem will start failing with abends.
>
> Do,we have any other process of restoring SCEELKED from backup dataset.
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions, send email
> to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions, send email
> to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>
> לשימת לבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה
> קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג
> מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את
> לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך
> סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום
> טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי.
>
> Please note that in accordance with Malam and/or its subsidiaries
> (hereinafter : "Malam") regulations and signatory rights, no offer,
> agreement, concession or representation is binding on the Malam, unless
> accompanied by a duly signed separate document (or a scanned version
> thereof), affixed with the Malam seal.
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
