Is it "rolls" or "roles"?
-----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Jake anderson Sent: Tuesday, February 24, 2015 3:34 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: [MVS-OE] Mount path more than 72 characters - error Hi lizette/All, The Syntax were in place : ----+----1----+----2----+----3----+----4----+----5----+----6----+----7-- ***************************** Top of Data ****************************** MOUNT FILESYSTEM('MFWSCC.MSPSINST.E1M40.QA.CE1MZFS') MOUNTPOINT('/u/users/framewrk/mfwscc/mspsinst/chrr040/qa/roles/securit y') TYPE(ZFS) MODE(RDWR) the above snapshot follows the correct syntax but during paste the characters COLS value are changed. I tried mounting it via IKJEFT01 via Batch I received the below error message READY MOUNT FILESYSTEM('MMWSSS.ZSPPPPPP.EEM40.QA.AEZMZFS') MISSING MOUNT POINT+ MISSING PATH NAME OF THE MOUNT POINT IN QUOTES RETURN CODE 00000004 RECEIVED DURING PARSING OF THE COMMAND. READY MOUNTPOINT('/u/users/ffffewkk/mmmsmc/mmmsinsz/zhrr040/qa/rolls/securi INVALID COMMAND NAME SYNTAX READY y') TYPE(ZFS) MODE(RDWR) INVALID COMMAND NAME SYNTAX READY END I am i missing anything on the above Regards, Jake On Mon, Feb 23, 2015 at 7:50 PM, Lizette Koehler <stars...@mindspring.com> wrote: > Jake, > > When you are editing the BPXPRMxx member, turn on HILITE. Just type > HILITE On the command line, then select the JCL option, place 3 in the > right hand entry and then a / at the next entry > > It will help you see if you extended over column 71 > > Lizette > > > > -----Original Message----- > > From: MVS OpenEdition [mailto:mvs...@vm.marist.edu] On Behalf Of > > Jake anderson > > Sent: Monday, February 23, 2015 1:40 AM > > To: mvs...@vm.marist.edu > > Subject: [MVS-OE] Mount path more than 72 characters - error > > > > Hello, > > > > Cross Posted to IBM-MAIN and MVS-OE group. > > > > I am trying to mount the below paths using BPXPRM00(Used the '00' in > > IEASYS00) but it fails. > > > > THE MOUNT POINT SPECIFIED IN BPXPRM00 DOES NOT EXIST. > > BPXF008I FILE SYSTEM MMMMM.SSSSSS.EEEEE.QQ.ZFS 393 WAS NOT MOUNTED. > > THE MOUNT POINT SPECIFIED IN BPXPRM00 DOES NOT EXIST. > > BPXF008I FILE SYSTEM MMMMM.RRRRR.EEEEE.PP.ZFS 394 WAS NOT MOUNTED. > > THE MOUNT POINT SPECIFIED IN BPXPRM00 DOES NOT EXIST. > > > > Mount point and File system: > > > > MOUNT FILESYSTEM('MMMMMM.SSSSSS.EEEEE.QQ.ZFS') > > MOUNTPOINT('/u/users/fffworke/mfcharl/msinstal/chrr080/qq/rolll/secu > > rit > > y > > ') TYPE(ZFS) MODE(RDWR) > > > > MOUNT FILESYSTEM('MMMMM.RRRRR.EEEEE.PP.ZFS') > > MOUNTPOINT('/u/users/fffworke/mfcharl/msinstal/chrr080/qq/rolll/secu > > rit > > y > > ') TYPE(ZFS) MODE(RDWR) > > > > As per the MVS tuning reference guide, the Mount definition can > > given > till > > 71st line and the part of the definition can be continued in the > > next > line. > > > > I did the same based on Manual recommendation but during the MVS > > SYNTAXCHECK it does not produces any error messages. After the IPL, > > i get the above error messages. Then the same path I mount using > > ISHELL.All the paths are in smaller case. > > > > Not sure if there is anything I missed. > > > > Any suggestions are advises much appreciated. > > > > z/OS : 2.1 > > > > Jake > > > > ---------------------------------------------------------------------- > For MVS-OE subscribe / signoff / archive access instructions, send > email to lists...@vm.marist.edu with the message: INFO MVS-OE > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
