So as a test Set your MCDS extremely low so it triggers the message and watch syslog when that is done. Either you will see the message or not.
If not, then something is suppressing it. You may need to set a SLIP MSG function and see if it in the system. Or turn off all MESSAGE Automation and repeat the test. Otherwise, open an SR with IBM and have them help you diagnose this issue. Lizette > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of George Rodriguez > Sent: Tuesday, November 03, 2015 9:33 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: DFSMShsm Threshold Message Not Being Displayed > > I had checked that already... > > > *George Rodriguez* > *Specialist II - IT Solutions* > *IT Enterprise Applications* > *PX - 47652* > *(561) 357-7652 (office)* > *(954) 415-7586 (mobile)* > *School District of Palm Beach County* > *3348 Forest Hill Blvd.* > *Room B-251* > *West Palm Beach, FL. 33406-5869* > *Florida's Only A-Rated Urban District For Eight Consecutive Years* > > On Tue, Nov 3, 2015 at 11:32 AM, George Rodriguez < > george.rodrig...@palmbeachschools.org> wrote: > > > It's the MCDS file giving the trouble: > > > > ARC0149I MONITOR STARTUP NOSPACE NOVOLUME, MCDS(092), ARC0149I > (CONT.) > > BCDS(085), OCDS(080), JOURNAL(080) > > > > > > *George Rodriguez* > > *Specialist II - IT Solutions* > > *IT Enterprise Applications* > > *PX - 47652* > > *(561) 357-7652 <%28561%29%20357-7652> (office)* > > *(954) 415-7586 <%28954%29%20415-7586> (mobile)* *School District of > > Palm Beach County* > > *3348 Forest Hill Blvd.* > > *Room B-251* > > *West Palm Beach, FL. 33406-5869* > > *Florida's Only A-Rated Urban District For Eight Consecutive Years* > > > > On Tue, Nov 3, 2015 at 11:26 AM, Lizette Koehler > > <stars...@mindspring.com> > > wrote: > > > >> George, > >> > >> Issue the following command and paste it for us to see > >> > >> F DFHSM,Q SETSYS DFHSM or how you call DFHSM at your site. > >> > >> You can just paste the relevant section on the BCDS percentages. It > >> is possible someone might have altered your numbers through a dynamic > >> set command. > >> > >> Lizette > >> > >> > >> > -----Original Message----- > >> > From: IBM Mainframe Discussion List > >> > [mailto:IBM-MAIN@LISTSERV.UA.EDU] > >> On > >> > Behalf Of George Rodriguez > >> > Sent: Tuesday, November 03, 2015 8:43 AM > >> > To: IBM-MAIN@LISTSERV.UA.EDU > >> > Subject: Re: DFSMShsm Threshold Message Not Being Displayed > >> > > >> > In the parmlib member ARCCMD00 there's a SETSYS that says: > >> > > >> > SETSYS /* Do not print space usage messages. > >> > MONITOR(NOSPACE /* Issue warning messages when: > >> > BCDS(85 1) /* BCDS is 85% full, > >> > MCDS(92 1) /* MCDS is 92% full, <===<< > >> > When threshold reaches 92% I should get a message. > >> > OCDS(80 1) /* OCDS is 80% full, > >> > JOURNAL(80 1)) /* Journal is 80% full. > >> > > >> > Now I only get the message that says it's full... > >> > > >> > > >> > > >> > *George Rodriguez* > >> > *Specialist II - IT Solutions* > >> > *IT Enterprise Applications* > >> > *PX - 47652* > >> > *(561) 357-7652 (office)* > >> > *(954) 415-7586 (mobile)* > >> > *School District of Palm Beach County* > >> > *3348 Forest Hill Blvd.* > >> > *Room B-251* > >> > *West Palm Beach, FL. 33406-5869* > >> > *Florida's Only A-Rated Urban District For Eight Consecutive Years* > >> > > >> > On Mon, Nov 2, 2015 at 1:18 PM, Lizette Koehler < > >> stars...@mindspring.com> > >> > wrote: > >> > > >> > > A few questions. > >> > > > >> > > 1) What message are you looking for that you are not seeing? It > >> > > helps to understand the issue. > >> > > 2) are you looking for this message in SYSLOG, DFHSM Address > >> > > space, > >> Other? > >> > > 3) Do you have any tools or MPF Exits that might be involved? > >> > > (Automation tools like OPS/MVS or Tivoli) > >> > > > >> > > Thank > >> > > > >> > > Lizette > >> > > > >> > > > >> > > > -----Original Message----- > >> > > > From: IBM Mainframe Discussion List > >> > > > [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of George Rodriguez > >> > > > Sent: Monday, November 02, 2015 8:23 AM > >> > > > To: IBM-MAIN@LISTSERV.UA.EDU > >> > > > Subject: DFSMShsm Threshold Message Not Being Displayed > >> > > > > >> > > > I did a search on IBMLink and found APAR # OZ85053 that > >> > > > describes my > >> > > problem to a > >> > > > tee... But the date on the APAR is 85/03/13... I'm running z/OS > >> v1.13. > >> > > > > >> > > > Any help would be appreciated... > >> > > > > >> > > > *George Rodriguez* > >> > > > *Specialist II - IT Solutions* > >> > > > *IT Enterprise Applications* > >> > > > *PX - 47652* > >> > > > *(561) 357-7652 (office)* > >> > > > *(954) 415-7586 (mobile)* > >> > > > *School District of Palm Beach County* > >> > > > *3348 Forest Hill Blvd.* > >> > > > *Room B-251* > >> > > > *West Palm Beach, FL. 33406-5869* *Florida's Only A-Rated Urban > >> > > > District For Eight Consecutive Years* > >> > > > > >> > > > -- > >> > >> --------------------------------------------------------------------- > >> - For IBM-MAIN subscribe / signoff / archive access instructions, > >> send email to lists...@listserv.ua.edu with the message: INFO > >> IBM-MAIN > >> > > > > > > -- > > > *Disclaimer: *Under Florida law, e-mail addresses are public records. If you > do not > want your e-mail address released in response to a public records request, do > not > send electronic mail to this entity. Instead, contact this office by phone or > in writing. > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN