Research this apar: ERROR HOLD AA49159 WAS NOT RESOLVED
Either order/install the additional maintenance required *OR* *WITH GREAT CARE AND EXTREME DILIGENCE*, determine if the exposure in this AA49159 will affect you installation. If *YES* ****DO NOT**** bypass the error hold. If *NO*, the error hold can be bypassed on the APPLY. e.g. Many times the error holds are associated with a particular feature. If you do not have, and are not planning to install this feature, the error hold may be safely bypassed. The fixing PTF will come along in due course and be installed in the normal maintenance stream. If you have, or are planning to install the feature, then it is most likely not a good idea to bypass the error hold. Another possibility is to research the PTF chain leading to AA49159. It is possible that somewhere in the chain, there is a "stop point" where all prior maint will go on with error. IF PTFS in the chain subsequent to the "stop point" are excluded from the apply, the earlier PTF's will go on without any issues. HTH, <snip> I am applying few toleration fixes for a hardware but I a receiving the below error message. CAUSER SYSMOD SUMMARY REPORT FOR APPLY CHECK PROCESSING CAUSER FMID MESSAGE ID PAGE ERROR DESCRIPTION AND POSSIBLE CAUSES UA90976 HBB7790 GIM35901I 2 ERROR HOLD AA49159 WAS NOT RESOLVED. PAGE 0003 - NOW SET TO TARGET ZONE TZN210 DATE 12/22/15 TIME 06:33:34 SMP/E UNRESOLVED HOLD REASON REPORT FOR APPLY CHECK PROCESSING NOTE: THE SYSMODS LISTED IN THIS REPORT ALSO APPEAR IN THE CAUSER SYSMOD SUMMARY HOLD MISSING HELD RESOLVING RESOLVER TYPE FMID CLASS APAR SYSMOD SYSMOD STATUS ------ ------- ------- ------- ------- --------- -------- ERROR HBB7790 PE AA48273 UA90976 UA78633 NOGO(H) UA78870 NOGO(H) AA48642 UA90976 UA78971 NOGO(H) AA48858 UA90978 UA78965 NOGO(H) AA49159 UA90976 ....deleted MISSING APAR ------- AA48273 AA48642 AA48858 AA49159 z/OS 2.1 </snip> This email � including attachments � may contain confidential information. If you are not the intended recipient, do not copy, distribute or act on it. Instead, notify the sender immediately and delete the message. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN