No impact unless you happen to have conflicting symbols. -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Beesley, Paul Sent: Thursday, June 7, 2018 2:27 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Use of dynamic system symbols in JCL
Yes, we've only just turned it on in a couple of test systems. My concern is what impact it will have on systems where the job scheduler does its own symbolic substitution (e.g.CA7) and I will follow this thread with interest Paul -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Jousma, David Sent: Wednesday, June 06, 2018 4:04 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Use of dynamic system symbols in JCL Is anyone else pushing back on turning on batch system symbol support? We've yet to do so, for the very reasons that IBM hadn’t supported in batch all along. My main concern is unpredictable results. Am I worrying for nothing? _________________________________________________________________ Dave Jousma Manager Mainframe Engineering, Assistant Vice President david.jou...@53.com 1830 East Paris, Grand Rapids, MI 49546 MD RSCB2H p 616.653.8429 f 616.653.2717 -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Carmen Vitullo Sent: Wednesday, June 06, 2018 10:49 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Use of dynamic system symbols in JCL **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** Yep, need to make sure SYSSYM=ALLOW for that jobclass, CLASS og XBMProc DupJob JobRC Active SysSym 1 PIN) NO MAXRC YES ALLOW 2 PIN) NO MAXRC YES ALLOW in a STC I run at IPL time I do about the same.... //CLEAN EXEC PGM=IDCAMS //SYSPRINT DD SYSOUT=* //SYSIN DD *,SYMBOLS=EXECSYS DEL 'ATTS.PROD.&SYSNAME..IPLINFO' /* //IPLINFO EXEC PGM=IKJEFT01,REGION=0M,PARM='IPLINFO', // DYNAMNBR=99 //SYSEXEC DD DSN=TS.USER.REXX,DISP=SHR //SYSTSPRT DD DSN=ATTS.PROD.&SYSNAME..IPLINFO,DISP=(,CATLG), // UNIT=SYSDA,SPACE=(TRK,(25,5),RLSE), // RECFM=FBA,LRECL=134,BLKSIZE=0 //SYSTSIN DD DUMMY //* //IEBCOPY1 EXEC PGM=IEBCOPY,REGION=2M,TIME=10 //SYSPRINT DD SYSOUT=* //SYSUT1 DD DISP=SHR,DSN=SYS1.&SYSNAME..PARMLIB //SYSUT2 DD DISP=(,CATLG), // DSN=ATTS.PROD.SYSA.D&LYYMMDD..T&LHHMMSS..PARMLIB, // UNIT=SYSALLDA,SPACE=(CYL,(10,1,75),RLSE) of course STC .... Carmen Vitullo ----- Original Message ----- From: "Andrew Arentsen" <andrew.arent...@acuity.com> To: IBM-MAIN@LISTSERV.UA.EDU Sent: Wednesday, June 6, 2018 9:43:25 AM Subject: Re: Use of dynamic system symbols in JCL In my JES2PARM, in the definition of the job class that I'd run this job in, I specify SYSSYM=ALLOW. I'm sure you could put this in dynamically with a $T of some sort. You'll also need the two periods as Rob stated. Andrew Arentsen Senior Mainframe Systems Engineer From: "Sean Gleann" <sean.gle...@gmail.com> To: IBM-MAIN@LISTSERV.UA.EDU Date: 06/06/2018 09:35 AM Subject: Re: Use of dynamic system symbols in JCL Sent by: "IBM Mainframe Discussion List" <IBM-MAIN@LISTSERV.UA.EDU> I understand what you're saying Rob, but that was one of the variants I tried. It still produces the same error Sean On 6 June 2018 at 15:29, Rob Schramm <rob.schr...@gmail.com> wrote: > You need 2 dots after symbol.. otherwise nodeis GT 8 characters > > Rob > > On Wed, Jun 6, 2018, 10:27 AM Sean Gleann <sean.gle...@gmail.com> wrote: > > > Can anyone point out what I'm doing wrong here, please? > > > > > > I'm trying to create a file with a name that features today's date. > > My statement is: > > //OUTFILE DD DSN=BACKUP.USERDALY.D&LYYMMDD.TER, > > // DISP=(NEW,CATLG,DELETE),SPACE=(TRK,(600,600),RLSE), > > // DSORG=PS,RECFM=FB,BLKSIZE=27648,LRECL=1024 > > > > When I submit the job to the system, I get: > > > > IEFC627I INCORRECT USE OF AMPERSAND IN THE DSN FIELD > > > > I've tried numerous variants of this statement, but I always get the same > > failure. > > I'm almost certainly doing something stupid, but right now I can't > > see > the > > wood for the trees... > > > > > > Help... Please... > > > > Sean Gleann > > > > -------------------------------------------------------------------- > > -- For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@listserv.ua.edu with the message: INFO > > IBM-MAIN > > > -- > > Rob Schramm > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ********************************************************************** This e-mail is confidential. If you are not the intended recipient, you must not disclose or use the information contained in it. If you have received this e-mail in error, please tell us immediately by return e-mail and delete the document. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Atos, Atos Consulting, Worldline and Canopy The Open Cloud Company are trading names used by the Atos group. The following trading entities are registered in England and Wales: Atos IT Services UK Limited (registered number 01245534), Atos Consulting Limited (registered number 04312380), Atos Worldline UK Limited (registered number 08514184) and Canopy The Open Cloud Company Limited (registration number 08011902). The registered office for each is at Second Floor, Mid City Place, 71 High Holborn, London, WC1V 6EA. The VAT No. for each is: GB232327983. This e-mail and the documents attached are confidential and intended solely for the addressee, and may contain confidential or privileged information. If you receive this e-mail in error, you are not authorised to copy, disclose, use or retain it. Please notify the sender immediately and delete this email from your systems. As emails may be intercepted, amended or lost, they are not secure. Atos therefore can accept no liability for any errors or their content. Although Atos endeavours to maintain a virus-free network, we do not warrant that this transmission is virus-free and can accept no liability for any damages resulting from any virus transmitted. The risks are deemed to be accepted by everyone who communicates with Atos by email. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ::DISCLAIMER:: -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
