Mick,
You are still missing the point: 64k TRK limit is PER VOLUME. It regards PDS, (basic) PS, and DA. In other words, BDAM datasets are 64k TRK constrained as some other datasets are. Of course some (PDS) datasets cannot be multivolume, while DA (and PS) can be, but that's different story.

--
Radoslaw Skorupka
Lodz, Poland







W dniu 2018-11-02 o 12:51, Mick Graley pisze:
Hi  Radoslaw,
If you combine all the rules for direct data sets across 2 or 3 pages of
the manual you get:
65,535 tracks per volume, 59 volumes, 16 extents per volume, 255 extents
across all volumes.
Which suggests to me a limit of 3,866,565 tracks.
Cheers,
Mick.


On Fri, 2 Nov 2018 at 11:40, R.S. <r.skoru...@bremultibank.com.pl> wrote:

Documentations says the following:

/Many types of data sets *are limited* to 65␠535 total tracks allocated
on any one volume, and if a greater number of tracks is required, this
attempt to create a data set will fail./

//
/Data sets that *are not limited* to 65␠535 total tracks allocated on
any one volume are: /

   * /A large format sequential; but cannot occupy more than 16␠777␠215
     tracks on a single volume. /
   * /Extended-format sequential/
   * /UNIX files/
   * /PDSE/
   * /VSAM/

...lack od BDAM files here

I think, you missed very important point: 64k tracks *PER VOLUME*. The
limit is not per dataset.


--
Radoslaw Skorupka
Lodz, Poland






W dniu 2018-11-02 o 12:32, Mick Graley pisze:
Hi All,

I can confirm that there is no 64K tracks limit on DSORG=DA data sets.
I inherited a number of Adabas databases and they use DSORG=DA.
One of my larger databases has a data storage component that is 240,525
tracks (16,035 cylinders) in 9 extents across 8 volumes.

Organization  . . . : DA
Record format . . . : F
Record length . . . : 5064
Block size  . . . . : 5064
1st extent cylinders: 363
Secondary cylinders : 1668
Allocated cylinders : 16,035
Allocated extents . : 9

The rules are documented here:

https://www.ibm.com/support/knowledgecenter/SSLTBW_2.3.0/com.ibm.zos.v2r3.idad400/mdss.htm
Cheers,

Mick.


On Sat, 27 Oct 2018 at 01:10, Steve Smith <sasd...@gmail.com> wrote:

BDAM implies DSORG DA, but can use any RECFM.  However, DSORG DA files
are
usually physically equivalent to DSORG PS, and often are so designated.
However, most DA files I've seen are indeed RECFM=F.

sas




======================================================================

Jeśli nie jesteś adresatem tej wiadomości:

- powiadom nas o tym w mailu zwrotnym (dziękujemy!),
- usuń trwale tę wiadomość (i wszystkie kopie, które wydrukowałeś lub zapisałeś 
na dysku).
Wiadomość ta może zawierać chronione prawem informacje, które może wykorzystać 
tylko adresat.Przypominamy, że każdy, kto rozpowszechnia (kopiuje, rozprowadza) 
tę wiadomość lub podejmuje podobne działania, narusza prawo i może podlegać 
karze.

mBank S.A. z siedzibą w Warszawie, ul. Senatorska 18, 00-950 
Warszawa,www.mBank.pl, e-mail: kont...@mbank.pl. Sąd Rejonowy dla m. st. 
Warszawy XII Wydział Gospodarczy Krajowego Rejestru Sądowego, KRS 0000025237, 
NIP: 526-021-50-88. Kapitał zakładowy (opłacony w całości) według stanu na 
01.01.2018 r. wynosi 169.248.488 złotych.

If you are not the addressee of this message:

- let us know by replying to this e-mail (thank you!),
- delete this message permanently (including all the copies which you have 
printed out or saved).
This message may contain legally protected information, which may be used 
exclusively by the addressee.Please be reminded that anyone who disseminates 
(copies, distributes) this message or takes any similar action, violates the 
law and may be penalised.

mBank S.A. with its registered office in Warsaw, ul. Senatorska 18, 00-950 
Warszawa,www.mBank.pl, e-mail: kont...@mbank.pl. District Court for the Capital 
City of Warsaw, 12th Commercial Division of the National Court Register, KRS 
0000025237, NIP: 526-021-50-88. Fully paid-up share capital amounting to PLN 
169,248,488 as at 1 January 2018.

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Reply via email to