Re: TCPIP4VSE and z/VM OSAX QDIO VSWITCH

Huegel, Thomas Wed, 24 May 2006 12:10:45 -0700

Do you have something like this in your SYSTEM CONFIG? or you could enter the commands manually.

DEFINE VSWITCH VSWITCH1 RDEV D00 D01 D02 CONTR * IP IPT 5 NONROUTER

MODIFY VSWITCH VSWITCH1 GRANT VSEAxxxx

and have DTCVSW1 configued and IPL'd

If you do a Q VSWITCH what do you see?

-----Original Message-----
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED]On Behalf Of Hooker, Don - OIT
Sent: Wednesday, May 24, 2006 1:55 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: TCPIP4VSE and z/VM OSAX QDIO VSWITCH

FINALLY we are licensed to run TCPIP4VSE!

We are trying to get it to get to the network via a virtual NIC TYPE QDIO associated with a

VSWITCH under z/VM 5.2.

However, I can't get it to initialize.

I did upgrade TCPIP to 1.5E on our VSE/ESA 2.62 systems.

Here are some definitions:

In the VM directory entry for the VSE guest:

nicdef D00 type QDIO dev 3 lan system dtcvsw1

In the VSE IPL proc:

ADD D00:D02,OSAX,EML (I had 1^st tried it w/o the ,EML - same results)

In VM SYSTEM CONFIG:

Define vswitch dtcvsw1 rdev b000 c000 connect controller dtcvsw1,

       IP vlan unaware

In IPINITxx.L:

DEFINE LINK,ID=VM_TCPIP,TYPE=OSAX,DEV=(D00,D01),MTU=8192, -

DATAPATH=D02,IPADDR=172.30.8.53,FRAGMENT=NO,PORTNAME=UNASSIGNED

(Should the IP address used here be the same as VSE's IP address?).

When TCP4VSE comes up, I get:

T1 0137 IPN631I Control has been passed to the TCP/IP engine

T1 0137 0001: IPL605E Unable to Initialize IJBOSA, return code: 1

T1 0137 0001: IPL609E Unable to initialize OSA Express, Link: VM_TCPIP

AR 0014 0P27I I UNKNWN DEV SYSXXX=D00

        CCSW=000006CB280E000100 CCB=000000

        SNS= 8200

I opened an ETR with IBM and they referred me to a couple of APARS but they do not seem applicable.

Any ideas? Do the definitions look correct? I can't find the return code for IPL605E anywhere.

Does anyone know what it means? (Leo?)...

Thanks in advance,

Don Hooker

<< ella for Spam Control >> has removed 4527 VSE-List messages and set aside 2689 VM-List for me
You can use it too - and it's FREE! www.ellaforspam.com

Re: TCPIP4VSE and z/VM OSAX QDIO VSWITCH

Reply via email to