Hi, Thanks a lot for your help. I am now able to enter the CP commands.
After logging in as a VM user if I log off (LOGOFF command), I guess the virtual machine / guest os is getting shutdown. I guess the VM user and Virtual machine / guest os are one and the same. I was also able to bring up the virtual machine / guest os using the IPL commands. I did this because I knew the IPLSYS for the Virtual machine from one of my earlier screenshot and was able to IPL with "IPL <some number> CLEAR" command. However I still need to find out details about the virtual machines that are defined but not active. and IPL them. Please suggest. Also find the attachment. In the mean while I am going through the zVMBasics pdf. Thanks & Regards, -GnanaShekar- On 10/20/07, Kris Buelens <[EMAIL PROTECTED]> wrote: > > I don't see an attached file... > To enter CP commands when Linux is active you have several choices > - hit the PA1 key, it will place you in CP READ and then you enter a CP > command > - issue #CP xxxx > - when logged on to a Linux user (like root) you can try HCP xxxx or VMCP > xxxx > - or use the SCIF, the Single Image Console Facility: from a VM user with > enough CP classes > -- SET SECUSER LINUXxyz * > -- SET SEND CP LINUXxyz xxxxx > The first command defines you as secondary user of LINUXxyz which means > that all console output of LINUXxyz will be routed to you if LINUXxyz is > disconnected, the SEND command sends a CP command to LINUXxyz > > Note that the # character and PA1 can have been redefined with the CP > TERMinal command, issue Q TERM and look for LINEND and BREAKIN > > 2007/10/20, GnanaShekar Subramani < [EMAIL PROTECTED]>: > > > > Hi, > > > > After logging through the 3270 terminal emulator, I am being asked to > > login to the linux guest. > > > > So there is no provison to enter CP commands. > > Find the attached file for more details. > > > > Please suggest. > > Thanks & Regards, > > -GnanaShekar- > > > > > > On 10/18/07, RPN01 <[EMAIL PROTECTED]> wrote: > > > > > > Another starting point, if the guests are connected via vSwitch, would > > > be to > > > "query vswitch" to get the name of the virtual switch. This will also > > > tell > > > you how many guests are attached to the virtual switch. Then "query > > > vswitch > > > <switchname> active" to list the individual guests attached to the > > > virtual > > > switch. > > > > > > Older methods might be reflected in the TCPIP definitions, which > > > should be > > > on TCPMAINT's minidisk 198. > > > > > > -- > > > .~. Robert P. Nix Mayo Foundation > > > /V\ RO-OE-5-55 200 First Street SW > > > /( )\ 507-284-0844 Rochester, MN 55905 > > > ^^-^^ ----- > > > "In theory, theory and practice are the same, but > > > in practice, theory and practice are different." > > > > > > > > > > > > > > > On 10/18/07 8:02 AM, "Dave Jones" < [EMAIL PROTECTED]> wrote: > > > > > > > Hello, GnanaShekar. > > > > > > > > Welcome to the wonderful world of z/VM and zLinux; I think you will > > > find > > > > it a very friendly and easy to use environment. > > > > > > > > To see how many guests (virtual machines) are running running, try > > > this > > > > command: > > > > > > > > CP Q Names > > > > > > > > This will show you a list of all of the virtual machines (guests) > > > that > > > > are currently running and whither or not they are connected to a > > > console > > > > (terminal) or not (DSC -- disconnected). Guests do not need to be > > > > connected to a console for them to continue to run. > > > > > > > > A good place for someone new to z/VM to start is to take a look at > > > this > > > > IBM document: "Introduction to the New Mainframe: z/VM Basics". You > > > can > > > > download a free copy from here: > > > > http://www.redbooks.ibm.com/redpieces/abstracts/sg247316.html?Open > > > > > > > > Good luck and do not be afraid to ask any more questions that you > > > might > > > > have here on the list......we really do enjoy helping new comers get > > > to > > > > know z/VM! > > > > > > > > > > > > Have a good one. > > > > > > > > GnanaShekar Subramani wrote: > > > >> Hi, > > > >> > > > >> I am a newbie to IBM systemz / Mainframe / zVM / zLinux. However I > > > am > > > >> familiar to IBM system p, AIX and LPAR / virtualization in AIX. > > > >> I have been given a username / password for zVM; and my client > > > wants me to > > > >> find out all the different partitions / guests that are existing. > > > >> A long time ago somebody has setup linux guests on zVM and they > > > have used > > > >> zLinux in the project. > > > >> > > > >> We donot have a record of what was done earlier in relation to zVM > > > / zLinux > > > >> setup. > > > >> > > > >> I am clueless. So thought of taking help from this forum. > > > >> > > > >> This is what appears for my zVM login. > > > >> -------------------------------------------------------- > > > >> > > > >> z/VM > > > >> ONLINE > > > >> > > > >> z/VM Version 5 Release 2.0, Service Level 0602 (64-bit), > > > >> built on IBM Virtualization Technology > > > >> There is no logmsg data > > > >> FILES: NO RDR, NO PRT, NO PUN > > > >> RECONNECTED AT 21:19:58 PDT WEDNESDAY 10/17/07 > > > >> ---------------------------------------------------------- > > > >> > > > >> I do not know even a single zVM command, so please suggest or point > > > me in > > > >> the right direction. > > > >> > > > >> > > > >> Thanks & Regards, > > > >> -GnanaShekar- > > > >> > > > > > > > > > > -- > Kris Buelens, > IBM Belgium, VM customer support >