Larry,
Your MAINT user id might not have enough storage
enter ====> DEF STOR 256M
Before you IPL 190
Also you might try purging CMSBAM segment before trying to re define it.
good luck
Bill Munson
VM System Programmer
Office of Information Technology
State of New Jersey
(609) 984-4065
President MVMUA
http://www.marist.edu/~mvmua
Harland, Lawrence wrote:
We are installing zVM 5.3 and need to recreate the CMSDOS and CMSBAM
segments
on the current spool. I issued the following (results listed below)
from the
Service Guide and received this error for CMSBAM:
"DMSDCS343E Storage in range 00B0D000-00B37FFF for CMSBAM in use."
I displayed storage for this range and it showed nothing in that area of
storage.
We keep the same spool packs between releases and rename the segments. We
are using the default names for 5.3 so I thought this would be easy. I'm
trying this from the MAINT id on a second level 5.3 system. Any help on
what
I might try or what I might be doing wrong would be appreciated.
Larry Harland
Univ. of Connecticut
-----------------------------------------
ipl 190 clear parm nosprof instseg no
z/VM V5.3.0 2007-10-18 14:00
acc (noprof
Ready; T=0.01/0.01 09:57:07
acc 5e5 b
Ready; T=0.01/0.01 09:57:17
ac 51d d
Ready; T=0.01/0.01 09:57:20
vmfppf segbld esasegs
VMFPPF2760I VMFPPF processing started for SEGBLD ESASEGS
VMFOVE2760I VMFOVER processing started
VMFOVE1954I Locating ESASEGS tag in file SEGBLD $PPF on disk D2
VMFOVE2760I VMFOVER processing completed successfully
VMFPPF2760I VMFPPF processing completed successfully for SEGBLD ESASEGS
VMFPPF2760I VMFPPF processing completed successfully
Ready; T=0.36/0.40 09:58:05
vmfbld ppf segbld esasegs (status
VMFBLD2760I VMFBLD processing started
VMFBLD1851I Reading build lists
VMFBLD2182I Identifying new build requirements
VMFBLD2182I No new build requirements identified
VMFBLD2180I There are 3 build requirements remaining
VMFBLD2760I VMFBLD processing completed successfully
Ready; T=1.63/1.71 09:58:54
vmfview build
Ready; T=0.06/0.06 10:01:55
vmfbld list segbld esasegs dosbam blddata (all
VMFBLD2767I Reading DOSBAM BLDDATA * for list of objects to process
VMFBLD2760I VMFBLD processing started
VMFBLD1851I Reading build lists
VMFBLD2182I Identifying new build requirements
VMFBLD2182I New build requirements identified
VMFBLD1851I (1 of 1) VMFBDSEG processing SEGBLIST EXC00000 D, target is
BUILD 51D (D)
VMFBDS2115I Validating segment CMSDOS
VMFBDS2115I Validating segment CMSBAM
VMFBDS2002I A DEFSEG command will be issued for 2 segment(s).
VMFBDS2219I Processing object CMSDOS.SEGMENT
HCPNSS440I Saved segment CMSDOS was successfully saved in fileid 0208.
RDR FILE 0018 SENT FROM MAINT53 PRT WAS 0018 RECS 0444 CPY 001 A
NOHOLD NOKEEP
DMSWGN715I DOSGEN COMPLETE
VMFBDS2219I Processing object CMSBAM.SEGMENT
DMSDCS1083E Saved segment $$DMY$$ does not exist
DMSSET1101I 100K DOS partition defined at hexadecimal location 020000
DMSSGN363R ENTER LOCATION WHERE CMSBAM WILL BE LOADED AND SAVED:
DMSSGN366R ENTER NAME OF SYSTEM TO BE SAVED:
DMSDCS343E Storage in range 00B0D000-00B37FFF for CMSBAM in use.
DMSSGN239E Cannot build segment. ReIPL CMS, ACCESS (NOPROF, and rebuild
segment.
VMFBDS1965E The command, $BAMGEN$ B0D000 CMSBAM, failed with return code 41
VMFBLD1851E (1 of 1) VMFBDSEG completed with return code 100. Some
objects were not built
VMFBLD2180I There are 3 build requirements remaining
VMFBLD2760I VMFBLD processing completed unsuccessfully
Ready(00008); T=4.91/5.40 10:02:42
d t00B0D000-00B37FFF
R00B0D000 00000000 00000000 00000000 00000000 F4 *................*
R00B0D010 to 00B0FFFF suppressed line(s) same as above ....
R00B10000 to 00B1FFFF suppressed line(s) same as above ....
R00B20000 to 00B2FFFF suppressed line(s) same as above ....
R00B30000 to 00B37FFF suppressed line(s) same as above ....
Ready; T=0.01/0.04 10:03:03
