Try adding STDEVOPT LIBRARY CTL To the 2nd level machine's directory entry.
Marcy "This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation." -----Original Message----- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Howard Mccorkle Sent: Thursday, June 12, 2008 12:55 PM To: IBMVM@LISTSERV.UARK.EDU Subject: [IBMVM] RMSMASTR FSMKIN1100E Error from communication function 24, return code = 15 Has anyone run into the following running a DFSMSRM command from a second= level z/vm? and what corrected it? FSMKIN1100E Error from communication function 24, return code = 15 Situation: First level z/VM 5.2.0 runs VM:Tape and RMSMASTR connected to a VTS. 2nd level z/VM 5.2.0 just RMSMASTR connected to same VTS. No problems with first level. 2nd level (VMTEST) in cms mode can run commands okay. RMSMASTR appears to initialize (attach then detach tape = drive without errors) in 2nd level. Is there some sort of virtual ctc needed between the 1st and 2nd level?