Hi Steve, 
Yes - IPL'd the 2nd level (VMTEST). 
Before the IPL I ran a "DFSMSRM Q LIB OPS" with no errors from VMTEST
(CMS).
The error code indicates a APPC connect error.... Not sure if I need to
look at some connection to the first level TSAF... I'm not a VM expert. 

-----Original Message-----
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Imler, Steven J
Sent: Thursday, June 12, 2008 1:06 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: RMSMASTR FSMKIN1100E Error from communication function 24,
return code = 15

And you LOGOFF/LOGON the VMTEST guest since you added STDEVOPT LIBRARY
CTL to its directory entry?

JR (Steven) Imler
CA
Senior Software Engineer
Tel:  +1 703 708 3479
Fax:  +1 703 708 3267
[EMAIL PROTECTED]
 

> -----Original Message-----
> From: The IBM z/VM Operating System
> [mailto:[EMAIL PROTECTED] On Behalf Of HOWARD MCCORKLE
> Sent: Thursday, June 12, 2008 04:01 PM
> To: IBMVM@LISTSERV.UARK.EDU
> Subject: Re: RMSMASTR FSMKIN1100E Error from communication function 
> 24, return code = 15
> 
> Yes to both
> 
> -----Original Message-----
> From: The IBM z/VM Operating System
> [mailto:[EMAIL PROTECTED] On
> Behalf Of Imler, Steven J
> Sent: Thursday, June 12, 2008 1:00 PM
> To: IBMVM@LISTSERV.UARK.EDU
> Subject: Re: RMSMASTR FSMKIN1100E Error from communication function 
> 24, return code = 15
> 
> Howard,
> 
> Do you have ...
> 
>   ---> STDEVOPT LIBRARY CTL
> 
> In the directory entry of *both* the VMTEST guest directory *and* 
> RMSMASTR running as a guest under VMTEST?
> 
> JR (Steven) Imler
> CA
> Senior Software Engineer
> Tel:  +1 703 708 3479
> Fax:  +1 703 708 3267
> [EMAIL PROTECTED]
> 
> 
> > -----Original Message-----
> > From: The IBM z/VM Operating System
> > [mailto:[EMAIL PROTECTED] On Behalf Of Howard Mccorkle
> > Sent: Thursday, June 12, 2008 03:55 PM
> > To: IBMVM@LISTSERV.UARK.EDU
> > Subject: RMSMASTR FSMKIN1100E Error from communication function 24, 
> > return code = 15
> > 
> > Has anyone run into the following running a DFSMSRM command from a 
> > second=
> >  
> > level z/vm? and what corrected it?
> > FSMKIN1100E Error from communication function 24, return code = 15
> > 
> > Situation: 
> > First level z/VM 5.2.0 runs VM:Tape and RMSMASTR connected to a VTS.
> > 2nd level z/VM 5.2.0 just RMSMASTR connected to same VTS.
> > No problems with first level. 2nd level (VMTEST) in cms
> mode can run
> > commands okay. RMSMASTR appears to initialize (attach then
> detach tape
> 
> > =
> > 
> > drive without errors) in 2nd level. Is there some sort of
> virtual ctc
> > needed between the 1st and 2nd level?
> > 
> > 
> 
> 
> "Email Firewall" made the following annotations.
> --------------------------------------------------------------
> ----------------
> 
> Warning: 
> All e-mail sent to this address will be received by the corporate 
> e-mail system, and is subject to archival and review by someone other 
> than the recipient.  This e-mail may contain proprietary information 
> and is intended only for the use of the intended recipient(s).  If the

> reader of this message is not the intended recipient(s), you are 
> notified that you have received this message in error and that any 
> review, dissemination, distribution or copying of this message is 
> strictly prohibited.  If you have received this
> message in error, please notify the sender immediately.   
>  
> ==============================================================
> ================
> 
> 


"Email Firewall" made the following annotations.
------------------------------------------------------------------------------

Warning: 
All e-mail sent to this address will be received by the corporate e-mail 
system, and is subject to archival and review by someone other than the 
recipient.  This e-mail may contain proprietary information and is intended 
only for the use of the intended recipient(s).  If the reader of this message 
is not the intended recipient(s), you are notified that you have received this 
message in error and that any review, dissemination, distribution or copying of 
this message is strictly prohibited.  If you have received this message in 
error, please notify the sender immediately.   
 
==============================================================================

Reply via email to