if the device(s) exist in the guests directory entry and the 1st level, you can dynamically define the device in your 2nd level guest: example with device address 999 set rdev 999 type 3279 HCPZRP6722I Created RDEV for device 0999. 1 RDEV(s) specified; 0 RDEV(s) changed; 1 RDEV(s) created Ready; T=0.01/0.01 16:41:28 q 999 GRAF 0999 DISABLED Ready; T=0.01/0.01 16:42:37
ena 999 Command complete Ready; T=0.01/0.01 16:42:47 *** >From the DIALed graf at 999: m * ddd 16:45:01 * MSG FROM LOGN0999: DDD David ________________________________ From: The IBM z/VM Operating System on behalf of Duane Weaver Sent: Thu 9/11/2008 4:37 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: [IBMVM] dial to 2nd level vm? We did a ENABLE ALL on the 2nd level and it did not help. We have not checked the RDEV's for addtional consoles that Deniis suggested. Duane At 04:10 PM 9/11/2008, you wrote: > > However, we are not able to DIAL to it. I put in some SPECIAL > > statements in definition within USER DIRECT which were of no > > help. I thinking there might be something on 2nd level VM system > > that needs to be changed or turned on. Suggestions? > > > >Did you do a CP ENABLE on the 2nd level system to make >those devices active? > >Ed Zell >Illinois Mutual Life >(309) 636-0107 > >. > > >CONFIDENTIALITY: This e-mail (including any attachments) may contain >confidential, proprietary and privileged information, and >unauthorized disclosure or use is prohibited. If you receive this >e-mail in error, notify the sender and delete this e-mail from your system.
