Duane, For your second level OS/390 - z/OS system, you need to code a TRLE entry in your VTAM definitions to allow the TCP/IP stack in OS/390 - z/OS to access your LAN. Did you do this?
If you want to DIAL to your second level system, connect to your first level z/VM system and just DIAL ZOSLVL2 XXX where XXX is a device number defined as a SPECIAL device number in your second level system's configuration. HITACHI DATA SYSTEMS Raymond E. Noal Senior Technical Engineer Office: (408) 970 - 7978 -----Original Message----- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Duane Weaver Sent: Thursday, September 11, 2008 1:38 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: dial to 2nd level vm? We did a ENABLE ALL on the 2nd level and it did not help. We have not checked the RDEV's for addtional consoles that Deniis suggested. Duane At 04:10 PM 9/11/2008, you wrote: > > However, we are not able to DIAL to it. I put in some SPECIAL > > statements in definition within USER DIRECT which were of no > > help. I thinking there might be something on 2nd level VM system > > that needs to be changed or turned on. Suggestions? > > > >Did you do a CP ENABLE on the 2nd level system to make >those devices active? > >Ed Zell >Illinois Mutual Life >(309) 636-0107 > >. > > >CONFIDENTIALITY: This e-mail (including any attachments) may contain >confidential, proprietary and privileged information, and >unauthorized disclosure or use is prohibited. If you receive this >e-mail in error, notify the sender and delete this e-mail from your system.