Or, if you don not have an active system, you can find it in the CP Messages and Codes manual at http://www.vm.ibm.com/library or you can try looking for it at IBM's Lookat Messages page at http://www-1.ibm.com/servers/eserver/zseries/zos/bkserv/lookat/
Regards, Richard Schuh > -----Original Message----- > From: The IBM z/VM Operating System > [mailto:ib...@listserv.uark.edu] On Behalf Of Alan Altmark > Sent: Wednesday, August 05, 2009 7:30 AM > To: IBMVM@LISTSERV.UARK.EDU > Subject: Re: Disabled Wait > > On Wednesday, 08/05/2009 at 10:04 EDT, "Billy R. Bingham" > <billy.bingham...@suddenlink.net> wrote: > > I guess if I interpreted the instructions correctly it > would work the > first > > time. The installation procedures say: Integrated 3270 > Console. This > > is > my > > first install on a zSeries and I selected the Operating System > > Messages > window > > on the HMC. I'm used to it being referred to as the > Integrated Console. > I > > talked to a co-worker and he got me straight :) > > > > You all pointing to the code 1010 in the PSW got me going > in the right > > direction though. So thanks for that. > > Billy, also know that when CP loads a disabled wait, the code > xxxx in the PSW is a message number. So you could look up > HCPxxxxW. E.g. HELP HCP1010W on an active VM system. Don't > worry about hex vs. decimal - just use what you see. > > Alan Altmark > z/VM Development > IBM Endicott >