Yes, it was written with the DYN option: IOCP L911QDIO ( WRTA2 DYN was the command
2009/12/8 Gregg <reed.gr...@gmail.com> > for the POR/CEC Activate was the IOCP in the current slot DYN? > > > On Tue, Dec 8, 2009 at 11:05 AM, Kris Buelens <kris.buel...@gmail.com>wrote: > >> I'm working on an old z800 machine for backup Recovery, that is running in >> basic mode (no LPARs). And SET CONFIGMODE ON fails: >> set configmode on >> HCPCCO6816E Dynamic I/O changes are not allowed on this system >> Ready(06816); T=0.01/0.01 16:12:18 >> >> On the HMC, I turned on "allow dynamic I/O configuration changes" in the >> Activation profile, I performed a Power-on-Reset. But still, it doesn't >> work. The SYSTEM CONFIG file should be OK: during IPL, CP tells: >> 16:03:42 HCPZPQ6857I System is enabled for dynamic I/O changes >> >> When I write the IOCDS, I get an error about the token: >> IOCP L911QDIO ( WRTA0 DYN >> QUERY TOKEN command return code was: 6816 >> Processing will continue with default token. >> TOTAL MESSAGES FOR SYNTAX CHECKING: 00000 INFORMATIONAL: 00000 >> 000 WARNING: 00000 ERROR: 00000 >> TOTAL MESSAGES FOR I/O DEVICE REPORT: 00000 INFORMATIONAL: 0 >> ION: 00000 WARNING: 00000 >> TOTAL MESSAGES FOR CHANNEL PATH ID REPORT: 00000 INFORMATIONAL: 0 >> ION: 00000 WARNING: 00000 >> >> TIME 16.57 DATE 09.342 PAGE 507 >> IYP059I IOCP SUCCESSFULLY WROTE IOCDS A0 >> >> TOTAL IOCP MESSAGES: 00001 INFORMATIONAL: 00001 CAUTION: 00000 >> 00000 ERROR: 00000 >> Ready; T=0.37/0.39 16:57:34 >> query token >> HCPCCO6816E Dynamic I/O changes are not allowed on this system >> The target channel subsystem configuration token is: >> VM-TOKEN11/13/0910:42:28 ....11/13/0911:44:06 >> Ready(06816); T=0.01/0.01 16:57:52 >> >> What can be wrong? >> >> -- >> Kris Buelens, >> IBM Belgium, VM customer support >> > > > > -- > Gregg Reed > "No Plan, survives execution" > -- Kris Buelens, IBM Belgium, VM customer support