On most z machines, you have to enable the system for Dynamic I/O through the Security Function on the HMC. I am not sure how to do that on a z800 but that is one thing I would check. You also need to make sure that your SYSTEM CONFIG includes SET_DYNamic in the Features Enable section. Another thing to check is whether you have DYNamic_I/O in the Features Enable section. If you do, CP will turn on Dynamic I/O during initialization to verify that the security is set correctly at the hardware. You should be able to look at the OPERATOR console log from the IPL and see whether the messages show that Dynamic is available.
On Tue, Dec 8, 2009 at 11:59 AM, Kris Buelens <kris.buel...@gmail.com> wrote: > Yes, it was written with the DYN option: IOCP L911QDIO ( WRTA2 DYN was the > command > > 2009/12/8 Gregg <reed.gr...@gmail.com> >> >> for the POR/CEC Activate was the IOCP in the current slot DYN? >> >> On Tue, Dec 8, 2009 at 11:05 AM, Kris Buelens <kris.buel...@gmail.com> >> wrote: >>> >>> I'm working on an old z800 machine for backup Recovery, that is running >>> in basic mode (no LPARs). And SET CONFIGMODE ON fails: >>> set configmode on >>> HCPCCO6816E Dynamic I/O changes are not allowed on this system >>> Ready(06816); T=0.01/0.01 16:12:18 >>> >>> On the HMC, I turned on "allow dynamic I/O configuration changes" in the >>> Activation profile, I performed a Power-on-Reset. But still, it doesn't >>> work. The SYSTEM CONFIG file should be OK: during IPL, CP tells: >>> 16:03:42 HCPZPQ6857I System is enabled for dynamic I/O changes >>> >>> When I write the IOCDS, I get an error about the token: >>> IOCP L911QDIO ( WRTA0 DYN >>> QUERY TOKEN command return code was: 6816 >>> Processing will continue with default token. >>> TOTAL MESSAGES FOR SYNTAX CHECKING: 00000 INFORMATIONAL: 00000 >>> 000 WARNING: 00000 ERROR: 00000 >>> TOTAL MESSAGES FOR I/O DEVICE REPORT: 00000 INFORMATIONAL: 0 >>> ION: 00000 WARNING: 00000 >>> TOTAL MESSAGES FOR CHANNEL PATH ID REPORT: 00000 INFORMATIONAL: 0 >>> ION: 00000 WARNING: 00000 >>> >>> TIME 16.57 DATE 09.342 PAGE 507 >>> IYP059I IOCP SUCCESSFULLY WROTE IOCDS A0 >>> >>> TOTAL IOCP MESSAGES: 00001 INFORMATIONAL: 00001 CAUTION: 00000 >>> 00000 ERROR: 00000 >>> Ready; T=0.37/0.39 16:57:34 >>> query token >>> HCPCCO6816E Dynamic I/O changes are not allowed on this system >>> The target channel subsystem configuration token is: >>> VM-TOKEN11/13/0910:42:28 ....11/13/0911:44:06 >>> Ready(06816); T=0.01/0.01 16:57:52 >>> >>> What can be wrong? >>> >>> -- >>> Kris Buelens, >>> IBM Belgium, VM customer support >> >> >> >> -- >> Gregg Reed >> "No Plan, survives execution" > > > > -- > Kris Buelens, > IBM Belgium, VM customer support >