The reason Linux rejects the telnet from CMS is TELNET on CMS is using port 23
and Linux is only excepting connections on port 22 for SSH you can telnet to
the linux image on port 22 from CMS using the command
TELNET host 22
See if you get a connection, or at least a message that the client refused
connection.
If you are using a windows machine try to ping and tracert from your PC to the
Linux image send this data to the network guys
Larry Davis
From: The IBM z/VM Operating System [mailto:[email protected]] On Behalf
Of Tom Huegel
Sent: Friday, September 17, 2010 6:33 PM
To: [email protected]
Subject: Re: A little OT z/LIINUX
I can ping the CLIENT from CMS, also from CMS I can Telnet to the CLIENT (it
gets rejected by LINUX).
I'm quite sure the VSWITCH isn't a problem.. I guess my question has been
answered.. It's the network guys ... AGAIN.
On Fri, Sep 17, 2010 at 2:35 PM, Davis, Larry (National VM/VSE Capability)
<[email protected]<mailto:[email protected]>> wrote:
Make sure the firewall allows port 22 and that the netmask at the switch allows
addresses to the OSA
If you are using a VSWITCH enter the command Q VSWITCH switch name DETAIL and
paste the response here.
Also , if you are using a VSWITCH did you authorize the client (VM user ID)
access to the vswitch.
Larry Davis
From: The IBM z/VM Operating System
[mailto:[email protected]<mailto:[email protected]>] On Behalf Of
Tom Huegel
Sent: Friday, September 17, 2010 5:15 PM
To: [email protected]<mailto:[email protected]>
Subject: A little OT z/LIINUX
Looking for a little help.
I'm trying to install a z/LINUX (SUSE 10) and things went along well to install
the starter system and start CLIENT.. but what next?
These are the last messages I get from the CLIENT.
*** sshd has been started ***
*** login using 'ssh -X [email protected]'<mailto:[email protected]'>
***
*** run 'yast' to start the installation ***
At this point what do I do?
The 3270 screen won't take any input.
If I try to PuTTY into the CLIENT I cannot connect.
Any suggestions?
Thanks
Tom
