Tom,
Check your PuTTY SSH tab to be sure you are using SSH protocol version 2. Version 1 will not work with SUSE or SLES. Bob From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Tom Huegel Sent: Saturday, September 18, 2010 6:42 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: A little OT z/LIINUX Ofcourse LINUX rejects my port 23 connection that was expected, the point was the VSWITCH works. Ping from windows doesn't work, but I can't ping VM either, although my tn3270 works fine. I think the network blocks pings.. I'll try TRACERT Monday.. CP TRACE I/O on z/LINUX will help. On Fri, Sep 17, 2010 at 6:01 PM, Davis, Larry (National VM/VSE Capability) <larry.dav...@hp.com> wrote: The reason Linux rejects the telnet from CMS is TELNET on CMS is using port 23 and Linux is only excepting connections on port 22 for SSH you can telnet to the linux image on port 22 from CMS using the command TELNET host 22 See if you get a connection, or at least a message that the client refused connection. If you are using a windows machine try to ping and tracert from your PC to the Linux image send this data to the network guys Larry Davis From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Tom Huegel Sent: Friday, September 17, 2010 6:33 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: A little OT z/LIINUX I can ping the CLIENT from CMS, also from CMS I can Telnet to the CLIENT (it gets rejected by LINUX). I'm quite sure the VSWITCH isn't a problem.. I guess my question has been answered.. It's the network guys ... AGAIN. On Fri, Sep 17, 2010 at 2:35 PM, Davis, Larry (National VM/VSE Capability) <larry.dav...@hp.com> wrote: Make sure the firewall allows port 22 and that the netmask at the switch allows addresses to the OSA If you are using a VSWITCH enter the command Q VSWITCH switch name DETAIL and paste the response here. Also , if you are using a VSWITCH did you authorize the client (VM user ID) access to the vswitch. Larry Davis From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Tom Huegel Sent: Friday, September 17, 2010 5:15 PM To: IBMVM@LISTSERV.UARK.EDU Subject: A little OT z/LIINUX Looking for a little help. I'm trying to install a z/LINUX (SUSE 10) and things went along well to install the starter system and start CLIENT.. but what next? These are the last messages I get from the CLIENT. *** sshd has been started *** *** login using 'ssh -X r...@172.17.51.121' *** *** run 'yast' to start the installation *** At this point what do I do? The 3270 screen won't take any input. If I try to PuTTY into the CLIENT I cannot connect. Any suggestions? Thanks Tom This electronic transmission and any documents accompanying this electronic transmission contain confidential information belonging to the sender. This information may be legally privileged. The information is intended only for the use of the individual or entity named above. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or the taking of any action in reliance on or regarding the contents of this electronically transmitted information is strictly prohibited.