Sorry, George.
My mistake.
HLASM isn't imbedded into z/VM. If needed, must be acquired separately.
______________________________________________
Clovis 



From:
George Henke/NYLIC <george_he...@newyorklife.com>
To:
IBMVM@LISTSERV.UARK.EDU
Date:
12/11/2010 18:30
Subject:
Re: APARs and PTFs for the z196
Sent by:
The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU>




ty, Clovis, but PK97799 is not an EREP APAR. 

 VM64807 (#3 below) is the Non-SES EREP APAR to which I believe you refer. 


I was able to apply VM64807 following the instructions in the EREP PGMDIR 
which were quite good. 

PK97799 (#1 below), however,  is an HLASM SES APAR which I have been told 
did not go on because I probably do not have HLASM on z/VM.   

This screen shot from:  
http://www-01.ibm.com/support/docview.wss?rs=1209&dc=DB540&q1=z196&uid=isg1_2817DEVICE_2817-ZVM
 

shows the details: 






12  10/09/22 VM64881  UM33183  1000     VM COUPLING FACILITY HANG  AT IP
11  10/09/08 VM64879  UM33171  1000     Z196 PROCESSOR SUPPORT D/T2817
10  10/09/08 VM64774  UM33167  1000     SET/QUERY REORDER COMMAND ( D/T2
9  10/09/07 VM64820  UM33157  1000     NEW FUNCTION IN PERFORMANCE TOOL
8  10/09/02 VM64656  UM32881  1000     NEW FUNCTION - D/T2817
7  10/09/02 VM64793  UM33092  1000     NEW FUNCTION - D/T2817
6. 10/08/31 VM64672  UM90236  1000     NEW FUNCTION - SUPPORT IS
5. 10/08/31 VM64747  UM90237  1000     NEW FUNCTION - HCM SUPPORTS
4  10/08/31 VM64798  UM33151  1000     Z196 PROCESSOR SUPPORT D/T2817
3  10/08/25 VM64807  UV61111  1000     NEW FUNCTION - SUPPORT NEW CPU M
2  10/08/25 VM64799  UM33139  1000     IOCP NEW FUNCTION
1. 10/08/19 PK97799  UK59301  1000     HLASM SUPPORT FOR IBM ZENTERPRIS







gclo...@br.ibm.com 
Sent by: The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> 
11/12/2010 02:56 PM 

Please respond to
The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU>


To
IBMVM@LISTSERV.UARK.EDU 
cc

Subject
Re: APARs and PTFs for the z196








George, 
That is a correction for a NON-SES product:  EREP. 
Not managed by SERVICE/PUT2PROD. 
See "Service Guide" how to apply NON-SES PTFs. 
______________________________________________
Clovis 

From: 
George Henke/NYLIC <george_he...@newyorklife.com> 
To: 
IBMVM@LISTSERV.UARK.EDU 
Date: 
08/11/2010 14:24 
Subject: 
Re: APARs and PTFs for the z196 
Sent by: 
The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU>






All 14 z196 compatibility APARs listed below went on fine except for 
PK97799. 

SES says there is not service for this APAR. 

How can there be no service? 

************************************************************************ 
****             SERVICE               USERID: MAINT                **** 
************************************************************************ 
****            Date: 11/05/10            Time: 23:52:46            **** 
************************************************************************ 
ST:VMFSRV2195I SERVICE ALL 2817HLA 
ST:VMFSRV2760I SERVICE processing started                                 
ST:VMFSUI2760I VMFSUFIN processing started 
ST:VMFSUI2760I VMFSUFIN processing started for product 5696234G%HLASM     
ST:VMFSUI1200I No SERVICE record was found for product 5696234G%HLASM     
ST:            in table VM SYSSUF                                         
ST:VMFSUI1206I Service was not installed for product 5696234G%HLASM       
ST:VMFSUI2760I VMFSUFIN processing completed successfully for product     
ST:            5696234G%HLASM                                             
ST:VMFSUI2760I VMFSUFIN processing started for product 5696234J%HLASM     
ST:VMFSUI1200I No SERVICE record was found for product 5696234J%HLASM     
ST:            in table VM SYSSUF                                         
ST:VMFSUI1206I Service was not installed for product 5696234J%HLASM       
ST:VMFSUI2760I VMFSUFIN processing completed successfully for product     
ST:            5696234J%HLASM                                             
ST:VMFSUI2760I VMFSUFIN processing completed successfully                 
ST:VMFSUT2760I VMFSUFTB processing started 
ST:VMFSUT2760I VMFSUFTB processing completed successfully                 
ST:VMFSRV2760I SERVICE processing completed successfully 

                
George Henke/NYLIC 
11/05/2010 11:27 PM 


To
The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> 
cc

Subject
Re: APARs and PTFs for the z196Link











Well the list of z196 (alias 2817) compatibility APARs has grown.  Here 
are all 14 now in alphanumeric order: 

PK97799 
VM64656 
VM64672 
VM64747 
VM64774 
VM64793 
VM64798 
VM64799 
VM64807 
VM64818 
VM64820 
VM64879 
VM64881 
VM64891 

btw:  The only way I could find the page in the link Clovis supplied was 
by searching SHOPZ on 2817 the other name for a z196. 




"Les Geer (607-429-3580)" <g...@gdlvm7.vnet.ibm.com> 
Sent by: The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> 
11/05/2010 04:40 PM 

Please respond to
The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU>



To
IBMVM@LISTSERV.UARK.EDU 
cc

Subject
Re: APARs and PTFs for the z196












>I thought VM64798, VM64879, and VM64881 were the only APARs needed for
>z196 compatibility for z/VM 5.4.
>
>You are 6.1 so maybe it is different.
>
>But if not, I better find out fast.
>
>

The above lists the minimum CP APARs (for 5.4 and 6.1) required to apply
prior to IPLing on a z196.  Mike is listing CMS, PerfKit, and
pre-requisite APARs.

Since the above list was generated, CP APAR VM64891 should also be
applied.  Also, to add to Mike's pre-requisite list below, VM64818.

Best Regards,
Les Geer
IBM z/VM and Linux Development
>
>
>
>
>
>Hello list,
>
>I'm trying to verify that I've got all the latest service for the z196. I
>start with a z/VM 6.1 system that is up to the latest RSU, service level
>1002.
>
>==> q cplevel
>z/VM Version 6 Release 1.0, service level 1002 (64-bit)
>Generated at 11/05/10 13:53:17 EDT
>IPL at 11/05/10 14:50:40 EDT
>
>Then, disregarding HCD and HCM, I believe the list of APARs to apply is
>"VM64774 VM64798 VM64879 VM64881 VM64793 VM64820 VM64814 VM64807 
VM64799".
>
>I order them from ShopZseries and SERVICE ALL/PUT2PROD them. I SHUTDOWN
>REIPL then write and run a short EXEC to verify:
>
>==> type check910 exec
>
>/* EXEC to check for z196 PTFs */
>'service cp status VM64774'
>'service cp status VM64798'
>'service cp status VM64879'
>'service cp status VM64881'
>'service cp status VM64793'
>'service perftk status VM64820'
>'service cp status VM64814'
>'service cms status VM64799'
>
>==> check910
>VMFSRV2760I SERVICE processing started
>VMFSRV1226I CP (6VMCPR10%CP) APAR VM64774 (PTF UM33169) status:
>VMFSRV1226I    RECEIVED  11/05/10 13:52:51
>VMFSRV1226I    APPLIED   11/05/10 13:52:52
>VMFSRV1226I    BUILT     11/05/10 13:53:57
>VMFSRV1226I    PUT2PROD  11/05/10 13:55:55
>VMFSRV2760I SERVICE processing completed successfully
>VMFSRV2760I SERVICE processing started
>VMFSRV1226I CP (6VMCPR10%CP) APAR VM64798 (PTF UM33153) status:
>VMFSRV1226I    RECEIVED  11/05/10 13:13:20
>VMFSRV1226I    APPLIED   11/05/10 13:13:22
>VMFSRV1226I    BUILT     11/05/10 13:15:43
>VMFSRV1226I    PUT2PROD  11/05/10 13:19:25
>VMFSRV2760I SERVICE processing completed successfully
>VMFSRV2760I SERVICE processing started
>VMFSRV1226I CP (6VMCPR10%CP) APAR VM64879 (PTF UM33172) status:
>VMFSRV1226I    RECEIVED  11/05/10 13:52:51
>VMFSRV1226I    APPLIED   11/05/10 13:52:52
>VMFSRV1226I    BUILT     11/05/10 13:53:57
>VMFSRV1226I    PUT2PROD  11/05/10 13:55:55
>VMFSRV2760I SERVICE processing completed successfully
>VMFSRV2760I SERVICE processing started
>VMFSRV1226I CP (6VMCPR10%CP) APAR VM64881 (PTF UM33184) status:
>VMFSRV1226I    RECEIVED  11/05/10 13:52:51
>VMFSRV1226I    APPLIED   11/05/10 13:52:52
>VMFSRV1226I    BUILT     11/05/10 13:53:57
>VMFSRV1226I    PUT2PROD  11/05/10 13:55:55
>VMFSRV2760I SERVICE processing completed successfully
>VMFSRV2760I SERVICE processing started
>VMFSRV1226I CP (6VMCPR10%CP) APAR VM64793 (PTF UM33093) status:
>VMFSRV1226I    RECEIVED  11/05/10 13:13:20
>VMFSRV1226I    APPLIED   11/05/10 13:13:22
>VMFSRV1226I    BUILT     11/05/10 13:15:43
>VMFSRV1226I    PUT2PROD  11/05/10 13:19:25
>VMFSRV2760I SERVICE processing completed successfully
>VMFSRV2760I SERVICE processing started
>VMFSRV1226I PERFTK (6VMPTK10%PERFTK) APAR VM64820 (PTF UM33158) status:
>VMFSRV1226I    RECEIVED  11/05/10 13:53:24
>VMFSRV1226I    APPLIED   11/05/10 13:53:25
>VMFSRV2760I SERVICE processing completed successfully
>VMFSRV2760I SERVICE processing started
>VMFSRV1226I CP (6VMCPR10%CP) APAR VM64814 (PTF UM33148) status:
>VMFSRV1226I    RECEIVED  11/05/10 13:13:20
>VMFSRV1226I    APPLIED   11/05/10 13:13:22
>VMFSRV1226I    BUILT     11/05/10 13:15:43
>VMFSRV1226I    PUT2PROD  11/05/10 13:19:25
>VMFSRV2760I SERVICE processing completed successfully
>VMFSRV2760I SERVICE processing started
>VMFSRV1226I CMS (6VMCMS10%CMS) APAR VM64799 (PTF UM33141) status:
>VMFSRV1226I    RECEIVED  11/05/10 13:52:36
>VMFSRV1226I    APPLIED   11/05/10 13:52:37
>VMFSRV1226I    BUILT     11/05/10 13:53:57
>VMFSRV1226I    PUT2PROD  11/05/10 13:55:55
>VMFSRV2760I SERVICE processing completed successfully
>
>Does this sound right?




Reply via email to