Right, your vswitch and nicdef statements don't change.    You may have to put 
a vlan on your SET VSWITCH GRANT statements.

Marcy 
-----Original Message-----
From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf 
Of Martin, Terry R. (CMS/CTR) (CTR)
Sent: Thursday, March 24, 2011 8:05 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: [IBMVM] Supporting Dot.1q trunk in z/Linux

Thanks Alan, this is what I was looking for. So the Vswitch and the NIC def for 
the guest does not change correct? It appears that the only thing that changes 
is at the switch level where it becomes a Trunk connection correct?

Thank You,

Terry Martin
Lockheed Martin
CMS - CITIC
3300 Lord Baltimore Drive, Suite 200, 21244  
Engineering Computing
Mainframe Support
Cell - 443 632-4191


-----Original Message-----
From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf 
Of Alan Altmark
Sent: Thursday, March 24, 2011 3:29 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Supporting Dot.1q trunk in z/Linux

On Thursday, 03/24/2011 at 01:01 EDT, "Martin, Terry R. (CMS/CTR) (CTR)" 
<terry.mar...@cms.hhs.gov> wrote:

> So my question is from my z/Linux side what changes to I need to make 
and where 
> are these changes reflected In my setup on the z/Linux. Just so you know 
my 
> z/VM TCP/IP stack is not really being used for the z/Linux guests that 
is being 
> done within z/Linux in my case RHEL 5.2  

You will make NO changes to your Linuxes.  Those on existing subnet A will 
remain there and be on VLAN "A".  New ones on Subnet B will be assigned to 
VLAN "B".  When a Linux on A and one on B want to talk to each other, the 
traffic will flow into the VSWITCH, down the OSA, out of the box, into the 
router, and back.

This may generate a requirement to reassign IP addrs so that those two 
servers are placed in the same subnet, with no need for traffic to flow 
out of the box.

Alan Altmark

z/VM and Linux on System z Consultant
IBM System Lab Services and Training 
ibm.com/systems/services/labservices 
office: 607.429.3323
mobile; 607.321.7556
alan_altm...@us.ibm.com
IBM Endicott

Reply via email to